From: Lu Baolu <baolu.lu@linux.intel.com>
To: Joerg Roedel <joro@8bytes.org>
Cc: Yi Liu <yi.l.liu@intel.com>, Dmytro Maluka <dmaluka@chromium.org>,
Jinhui Guo <guojinhui.liam@bytedance.com>,
iommu@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH 6/7] iommu/vt-d: Clear Present bit before tearing down context entry
Date: Thu, 22 Jan 2026 09:48:55 +0800 [thread overview]
Message-ID: <20260122014856.2457052-7-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <20260122014856.2457052-1-baolu.lu@linux.intel.com>
When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.
While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.
Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:
1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.
Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible.
Fixes: ba39592764ed2 ("Intel IOMMU: Intel IOMMU driver")
Reported-by: Dmytro Maluka <dmaluka@chromium.org>
Closes: https://lore.kernel.org/all/aTG7gc7I5wExai3S@google.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Dmytro Maluka <dmaluka@chromium.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260120061816.2132558-3-baolu.lu@linux.intel.com
---
drivers/iommu/intel/iommu.h | 21 ++++++++++++++++++++-
drivers/iommu/intel/iommu.c | 4 +++-
drivers/iommu/intel/pasid.c | 5 ++++-
3 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h
index 25c5e22096d4..599913fb65d5 100644
--- a/drivers/iommu/intel/iommu.h
+++ b/drivers/iommu/intel/iommu.h
@@ -900,7 +900,26 @@ static inline int pfn_level_offset(u64 pfn, int level)
static inline void context_set_present(struct context_entry *context)
{
- context->lo |= 1;
+ u64 val;
+
+ dma_wmb();
+ val = READ_ONCE(context->lo) | 1;
+ WRITE_ONCE(context->lo, val);
+}
+
+/*
+ * Clear the Present (P) bit (bit 0) of a context table entry. This initiates
+ * the transition of the entry's ownership from hardware to software. The
+ * caller is responsible for fulfilling the invalidation handshake recommended
+ * by the VT-d spec, Section 6.5.3.3 (Guidance to Software for Invalidations).
+ */
+static inline void context_clear_present(struct context_entry *context)
+{
+ u64 val;
+
+ val = READ_ONCE(context->lo) & GENMASK_ULL(63, 1);
+ WRITE_ONCE(context->lo, val);
+ dma_wmb();
}
static inline void context_set_fault_enable(struct context_entry *context)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 134302fbcd92..c66cc51f9e51 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1240,10 +1240,12 @@ static void domain_context_clear_one(struct device_domain_info *info, u8 bus, u8
}
did = context_domain_id(context);
- context_clear_entry(context);
+ context_clear_present(context);
__iommu_flush_cache(iommu, context, sizeof(*context));
spin_unlock(&iommu->lock);
intel_context_flush_no_pasid(info, context, did);
+ context_clear_entry(context);
+ __iommu_flush_cache(iommu, context, sizeof(*context));
}
int __domain_setup_first_level(struct intel_iommu *iommu, struct device *dev,
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index 07e056b24605..f5dfa9b9eb3e 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -1024,7 +1024,7 @@ static int device_pasid_table_setup(struct device *dev, u8 bus, u8 devfn)
}
if (context_copied(iommu, bus, devfn)) {
- context_clear_entry(context);
+ context_clear_present(context);
__iommu_flush_cache(iommu, context, sizeof(*context));
/*
@@ -1044,6 +1044,9 @@ static int device_pasid_table_setup(struct device *dev, u8 bus, u8 devfn)
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
devtlb_invalidation_with_pasid(iommu, dev, IOMMU_NO_PASID);
+ context_clear_entry(context);
+ __iommu_flush_cache(iommu, context, sizeof(*context));
+
/*
* At this point, the device is supposed to finish reset at
* its driver probe stage, so no in-flight DMA will exist,
--
2.43.0
next prev parent reply other threads:[~2026-01-22 1:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-22 1:48 [PATCH 0/7] [PULL REQUEST] Intel IOMMU updates for v6.20 Lu Baolu
2026-01-22 1:48 ` [PATCH 1/7] iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode Lu Baolu
2026-01-22 1:48 ` [PATCH 2/7] iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in " Lu Baolu
2026-01-22 1:48 ` [PATCH 3/7] iommu/vt-d: Flush cache for PASID table before using it Lu Baolu
2026-01-22 1:48 ` [PATCH 4/7] iommu/vt-d: Flush piotlb for SVM and Nested domain Lu Baolu
2026-01-22 1:48 ` [PATCH 5/7] iommu/vt-d: Clear Present bit before tearing down PASID entry Lu Baolu
2026-01-22 1:48 ` Lu Baolu [this message]
2026-01-22 1:48 ` [PATCH 7/7] iommu/vt-d: Fix race condition during PASID entry replacement Lu Baolu
2026-01-22 8:20 ` [PATCH 0/7] [PULL REQUEST] Intel IOMMU updates for v6.20 Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260122014856.2457052-7-baolu.lu@linux.intel.com \
--to=baolu.lu@linux.intel.com \
--cc=dmaluka@chromium.org \
--cc=guojinhui.liam@bytedance.com \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox