From: Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>,
Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Subject: Re: [PATCH] iommu/vt-d: Fix broken device issue when using iommu=pt
Date: Mon, 11 Aug 2014 12:56:10 +0800 [thread overview]
Message-ID: <53E84CEA.7080402@linux.intel.com> (raw)
In-Reply-To: <53E83C9E.9060405-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Hi Yijing,
These devices don't support Phantom Function (PhantFunc 0).
Could you please help to provide full dmesg, /proc/iomem, and ACPI
DMAR table? You may get DMAR table by:
acpidump > acpi.bin
acpixtract -a acpib.bin
iasl -d DMAR.dat
Thanks!
Gerry
On 2014/8/11 11:46, Yijing Wang wrote:
> On 2014/8/11 11:15, Jiang Liu wrote:
>> Hi Yijing,
>> Could you please help to provide detail information about the
>> PCI device, such as "lscpi -vvv"? It seems like that "Phantom
>> Functions" is enabled with these PCI devices.
>> Thanks!
>> Gerry
>
> My pleasure!
>
> Gerry, the lspci info is below:
>
> HP C7000 Server: The problem devices id: 04:00.4 04:00.5 04:00.6 04:00.7
>
> 04:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01)
> Subsystem: Hewlett-Packard Company Device 337b
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 32
> Region 0: Memory at ebff0000 (64-bit, non-prefetchable) [size=16K]
> Region 2: Memory at ebfc0000 (64-bit, non-prefetchable) [size=128K]
> Region 4: Memory at ebfa0000 (64-bit, non-prefetchable) [size=128K]
> [virtual] Expansion ROM at dc000000 [disabled] [size=256K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] MSI-X: Enable+ Count=32 Masked-
> Vector table: BAR=0 offset=00002000
> PBA: BAR=0 offset=00003000
> Capabilities: [c0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <16us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
> MaxPayload 256 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <2us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [b8] Vital Product Data
> Product Name: 647586-B21, NIC PF
> Read-only fields:
> [PN] Part number: 647584-001
> [SN] Serial number: H3534360ZX
> [V0] Vendor specific: VA00000000
> [EC] Engineering changes: A-5120
> [FN] Unknown: 36 34 39 39 34 30 2d 30 30 31 0d
> [VA] Vendor specific: 649940-001\x0d
> [VB] Vendor specific: PW=10W; PCIE X8 GEN 2
> [V1] Vendor specific: HP FlexFabric 10Gb 2-port 554FLB Adapter
> [V2] Vendor specific: 554FLB
> [V4] Vendor specific: 0
> [V5] Vendor specific: OCl11102-F4-HP
> [V6] Vendor specific: A0:1,D0:1
> [RV] Reserved: checksum good, 42 byte(s) reserved
> End
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP- ECRC- UnsupReq+ ACSViol-
> UESvrt: DLP- SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
> IOVSta: Migration-
> Initial VFs: 0, Total VFs: 0, Number of VFs: 0, Function Dependency Link: 00
> VF offset: 0, stride: 1, Device ID: 0710
> Supported Page Size: 00000557, System Page Size: 00000001
> Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Capabilities: [160 v1] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 1
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [168 v1] Device Serial Number f0-92-1c-ff-fe-16-8d-48
> Capabilities: [12c v1] Transaction Processing Hints
> No steering table available
> Kernel driver in use: be2net
> Kernel modules: be2net
>
> 04:00.1 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01)
> Subsystem: Hewlett-Packard Company Device 337b
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 36
> Region 0: Memory at ebf90000 (64-bit, non-prefetchable) [size=16K]
> Region 2: Memory at ebf60000 (64-bit, non-prefetchable) [size=128K]
> Region 4: Memory at ebf40000 (64-bit, non-prefetchable) [size=128K]
> [virtual] Expansion ROM at dc040000 [disabled] [size=256K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] MSI-X: Enable+ Count=32 Masked-
> Vector table: BAR=0 offset=00002000
> PBA: BAR=0 offset=00003000
> Capabilities: [c0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <16us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
> MaxPayload 256 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <2us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [b8] Vital Product Data
> Product Name: 647586-B21, NIC PF
> Read-only fields:
> [PN] Part number: 647584-001
> [SN] Serial number: H3534360ZX
> [V0] Vendor specific: VA00000000
> [EC] Engineering changes: A-5120
> [FN] Unknown: 36 34 39 39 34 30 2d 30 30 31 0d
> [VA] Vendor specific: 649940-001\x0d
> [VB] Vendor specific: PW=10W; PCIE X8 GEN 2
> [V1] Vendor specific: HP FlexFabric 10Gb 2-port 554FLB Adapter
> [V2] Vendor specific: 554FLB
> [V4] Vendor specific: 1
> [V5] Vendor specific: OCl11102-F4-HP
> [V6] Vendor specific: A0:1,D0:1
> [RV] Reserved: checksum good, 42 byte(s) reserved
> End
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP- ECRC- UnsupReq+ ACSViol-
> UESvrt: DLP- SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
> IOVSta: Migration-
> Initial VFs: 0, Total VFs: 0, Number of VFs: 0, Function Dependency Link: 01
> VF offset: 0, stride: 1, Device ID: 0710
> Supported Page Size: 00000557, System Page Size: 00000001
> Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Capabilities: [160 v1] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 2
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [168 v1] Device Serial Number f0-92-1c-ff-fe-16-8d-48
> Capabilities: [12c v1] Transaction Processing Hints
> No steering table available
> Kernel driver in use: be2net
> Kernel modules: be2net
>
> 04:00.2 Mass storage controller: Emulex Corporation OneConnect 10Gb iSCSI Initiator (be3) (rev 01)
> Subsystem: Hewlett-Packard Company Device 337b
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 37
> Region 0: Memory at ebf30000 (64-bit, non-prefetchable) [size=16K]
> Region 2: Memory at ebf00000 (64-bit, non-prefetchable) [size=128K]
> Region 4: Memory at ebee0000 (64-bit, non-prefetchable) [size=128K]
> [virtual] Expansion ROM at dc080000 [disabled] [size=256K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] MSI-X: Enable- Count=8 Masked-
> Vector table: BAR=0 offset=00002000
> PBA: BAR=0 offset=00003000
> Capabilities: [c0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <16us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
> MaxPayload 256 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <2us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [b8] Vital Product Data
> Product Name: 647586-B21, iSCSI PF
> Read-only fields:
> [PN] Part number: 647584-001
> [SN] Serial number: H3534360ZX
> [V0] Vendor specific: VA00000000
> [EC] Engineering changes: A-5120
> [FN] Unknown: 36 34 39 39 34 30 2d 30 30 31 0d
> [VA] Vendor specific: 649940-001\x0d
> [VB] Vendor specific: PW=10W; PCIE X8 GEN 2
> [V1] Vendor specific: HP FlexFabric 10Gb 2-port 554FLB Adapter
> [V2] Vendor specific: 554FLB
> [V4] Vendor specific: 0
> [V5] Vendor specific: OCl11102-F4-HP
> [V6] Vendor specific: A0:1,D0:1
> [RV] Reserved: checksum good, 40 byte(s) reserved
> End
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP- ECRC- UnsupReq+ ACSViol-
> UESvrt: DLP- SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
> IOVSta: Migration-
> Initial VFs: 0, Total VFs: 0, Number of VFs: 0, Function Dependency Link: 02
> VF offset: 0, stride: 1, Device ID: 0712
> Supported Page Size: 00000557, System Page Size: 00000001
> Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Capabilities: [160 v1] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 3
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [168 v1] Device Serial Number f0-92-1c-ff-fe-16-8d-48
> Capabilities: [12c v1] Transaction Processing Hints
> No steering table available
> Kernel driver in use: be2iscsi
> Kernel modules: be2iscsi
>
> 04:00.3 Mass storage controller: Emulex Corporation OneConnect 10Gb iSCSI Initiator (be3) (rev 01)
> Subsystem: Hewlett-Packard Company Device 337b
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin D routed to IRQ 38
> Region 0: Memory at ebed0000 (64-bit, non-prefetchable) [size=16K]
> Region 2: Memory at ebea0000 (64-bit, non-prefetchable) [size=128K]
> Region 4: Memory at ebe80000 (64-bit, non-prefetchable) [size=128K]
> [virtual] Expansion ROM at dc0c0000 [disabled] [size=256K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] MSI-X: Enable- Count=8 Masked-
> Vector table: BAR=0 offset=00002000
> PBA: BAR=0 offset=00003000
> Capabilities: [c0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <16us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
> MaxPayload 256 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <2us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [b8] Vital Product Data
> Product Name: 647586-B21, iSCSI PF
> Read-only fields:
> [PN] Part number: 647584-001
> [SN] Serial number: H3534360ZX
> [V0] Vendor specific: VA00000000
> [EC] Engineering changes: A-5120
> [FN] Unknown: 36 34 39 39 34 30 2d 30 30 31 0d
> [VA] Vendor specific: 649940-001\x0d
> [VB] Vendor specific: PW=10W; PCIE X8 GEN 2
> [V1] Vendor specific: HP FlexFabric 10Gb 2-port 554FLB Adapter
> [V2] Vendor specific: 554FLB
> [V4] Vendor specific: 1
> [V5] Vendor specific: OCl11102-F4-HP
> [V6] Vendor specific: A0:1,D0:1
> [RV] Reserved: checksum good, 40 byte(s) reserved
> End
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP- ECRC- UnsupReq+ ACSViol-
> UESvrt: DLP- SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [180 v1] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
> IOVSta: Migration-
> Initial VFs: 0, Total VFs: 0, Number of VFs: 0, Function Dependency Link: 03
> VF offset: 0, stride: 1, Device ID: 0712
> Supported Page Size: 00000557, System Page Size: 00000001
> Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Capabilities: [160 v1] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 0
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [168 v1] Device Serial Number f0-92-1c-ff-fe-16-8d-48
> Capabilities: [12c v1] Transaction Processing Hints
> No steering table available
> Kernel driver in use: be2iscsi
> Kernel modules: be2iscsi
>
> Huawei Storage Server: devices id: 03:07.1 03:07.2 03:07.3
>
> 03:00.0 Bridge: PLX Technology, Inc. Device 8725 (rev ca)
> Subsystem: PLX Technology, Inc. Device 87b0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 94
> Region 0: Memory at 94100000 (32-bit, non-prefetchable) [size=256K]
> Region 2: Memory at 180000000000 (64-bit, prefetchable) [size=4T]
> Region 4: Memory at 90000000 (32-bit, non-prefetchable) [size=64M]
> Region 5: Memory at 94000000 (32-bit, non-prefetchable) [size=1M]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] MSI: Enable+ Count=1/8 Maskable+ 64bit+
> Address: 00000000fee00000 Data: 4063
> Masking: 000000fe Pending: 00000000
> Capabilities: [68] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 256 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #1, Speed 8GT/s, Width x8, ASPM L0s L1, Latency L0 <2us, L1 <4us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [c8] Vendor Specific Information: Len=00 <?>
> Capabilities: [100 v1] Device Serial Number ca-87-00-10-b5-df-0e-00
> Capabilities: [fb4 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 1f, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [148 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> Capabilities: [c34 v1] Vendor Specific Information: ID=0003 Rev=0 Len=078 <?>
> Capabilities: [b70 v1] Vendor Specific Information: ID=0001 Rev=0 Len=010 <?>
>
> Thanks!
> Yijing.
>
>
>>
>> On 2014/8/11 10:54, Yijing Wang wrote:
>>> We found some strange devices in HP C7000 and Huawei Server. These devices
>>> can not be enumerated by OS, but they still did DMA read/write without OS
>>> management. Because iommu will not create the DMA mapping for these devices,
>>> the DMA read/write will be blocked by iommu hardware.
>>>
>>> Eg.
>>> \-[0000:00]-+-00.0 Intel Corporation Xeon E5/Core i7 DMI2
>>> +-01.0-[11]--
>>> +-01.1-[02]--
>>> +-02.0-[04]--+-00.0 Emulex Corporation OneConnect 10Gb NIC (be3)
>>> | +-00.1 Emulex Corporation OneConnect 10Gb NIC (be3)
>>> | +-00.2 Emulex Corporation OneConnect 10Gb iSCSI Initiator (be3)
>>> | \-00.3 Emulex Corporation OneConnect 10Gb iSCSI Initiator (be3)
>>> +-02.1-[12]--
>>> Kernel only found four devices in bus 0x04, but we found following DMA errors in dmesg.
>>>
>>> [ 1438.477262] DRHD: handling fault status reg 402
>>> [ 1438.498278] DMAR:[DMA Write] Request device [04:00.4] fault addr bdf70000
>>> [ 1438.498280] DMAR:[fault reason 02] Present bit in context entry is clear
>>> [ 1438.566458] DMAR:[DMA Write] Request device [04:00.5] fault addr bdf70000
>>> [ 1438.566460] DMAR:[fault reason 02] Present bit in context entry is clear
>>> [ 1438.635211] DMAR:[DMA Write] Request device [04:00.6] fault addr bdf70000
>>> [ 1438.635213] DMAR:[fault reason 02] Present bit in context entry is clear
>>> [ 1438.703849] DMAR:[DMA Write] Request device [04:00.7] fault addr bdf70000
>>> [ 1438.703851] DMAR:[fault reason 02] Present bit in context entry is clear
>>>
>>> Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
>>> ---
>>> arch/x86/include/asm/iommu.h | 2 ++
>>> arch/x86/kernel/pci-dma.c | 8 ++++++++
>>> drivers/iommu/intel-iommu.c | 41 +++++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 51 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
>>> index 345c99c..5e3a2d8 100644
>>> --- a/arch/x86/include/asm/iommu.h
>>> +++ b/arch/x86/include/asm/iommu.h
>>> @@ -5,6 +5,8 @@ extern struct dma_map_ops nommu_dma_ops;
>>> extern int force_iommu, no_iommu;
>>> extern int iommu_detected;
>>> extern int iommu_pass_through;
>>> +extern int iommu_pt_force_bus;
>>> +extern int iommu_pt_force_domain;
>>>
>>> /* 10 seconds */
>>> #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
>>> diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
>>> index a25e202..bf21d97 100644
>>> --- a/arch/x86/kernel/pci-dma.c
>>> +++ b/arch/x86/kernel/pci-dma.c
>>> @@ -44,6 +44,8 @@ int iommu_detected __read_mostly = 0;
>>> * guests and not for driver dma translation.
>>> */
>>> int iommu_pass_through __read_mostly;
>>> +int iommu_pt_force_bus = -1;
>>> +int iommu_pt_force_domain = -1;
>>>
>>> extern struct iommu_table_entry __iommu_table[], __iommu_table_end[];
>>>
>>> @@ -146,6 +148,7 @@ void dma_generic_free_coherent(struct device *dev, size_t size, void *vaddr,
>>> */
>>> static __init int iommu_setup(char *p)
>>> {
>>> + char *end;
>>> iommu_merge = 1;
>>>
>>> if (!p)
>>> @@ -192,6 +195,11 @@ static __init int iommu_setup(char *p)
>>> #endif
>>> if (!strncmp(p, "pt", 2))
>>> iommu_pass_through = 1;
>>> + if (!strncmp(p, "pt_force=", 9)) {
>>> + iommu_pass_through = 1;
>>> + iommu_pt_force_domain = simple_strtol(p+9, &end, 0);
>>> + iommu_pt_force_bus = simple_strtol(end+1, NULL, 0);
>>> + }
>>>
>>> gart_parse_options(p);
>>>
>>> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
>>> index d1f5caa..49757f1 100644
>>> --- a/drivers/iommu/intel-iommu.c
>>> +++ b/drivers/iommu/intel-iommu.c
>>> @@ -2705,6 +2705,47 @@ static int __init iommu_prepare_static_identity_mapping(int hw)
>>> return ret;
>>> }
>>>
>>> + /* We found some strange devices in HP c7000 and other platforms that
>>> + * can not be enumerated by OS, but they did DMA read/write without
>>> + * driver management, so we should create the pt mapping for these
>>> + * devices to avoid DMA errors. Add iommu=pt_force=segment:busnum to
>>> + * force to do pt context mapping in the bus number.
>>> + */
>>> + if (iommu_pt_force_bus >= 0 && iommu_pt_force_bus >= 0) {
>>> + int found = 0;
>>> +
>>> + iommu = NULL;
>>> + for_each_active_iommu(iommu, drhd) {
>>> + if (iommu_pt_force_domain != drhd->segment)
>>> + continue;
>>> +
>>> + for_each_active_dev_scope(drhd->devices, drhd->devices_cnt, i, dev) {
>>> + if (!dev_is_pci(dev))
>>> + continue;
>>> +
>>> + pdev = to_pci_dev(dev);
>>> + if (pdev->bus->number == iommu_pt_force_bus ||
>>> + (pdev->subordinate
>>> + && pdev->subordinate->number <= iommu_pt_force_bus
>>> + && pdev->subordinate->busn_res.end >= iommu_pt_force_bus)) {
>>> + found = 1;
>>> + break;
>>> + }
>>> + }
>>> +
>>> + if (drhd->include_all) {
>>> + found = 1;
>>> + break;
>>> + }
>>> + }
>>> +
>>> + if (found && iommu)
>>> + for (i = 0; i < 256; i++)
>>> + domain_context_mapping_one(si_domain, iommu, iommu_pt_force_bus,
>>> + i, hw ? CONTEXT_TT_PASS_THROUGH :
>>> + CONTEXT_TT_MULTI_LEVEL);
>>> + }
>>> +
>>> return 0;
>>> }
>>>
>>>
>>
>> .
>>
>
>
next prev parent reply other threads:[~2014-08-11 4:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 2:54 [PATCH] iommu/vt-d: Fix broken device issue when using iommu=pt Yijing Wang
[not found] ` <1407725674-27271-1-git-send-email-wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2014-08-11 3:15 ` Jiang Liu
[not found] ` <53E8355C.4010906-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-08-11 3:46 ` Yijing Wang
[not found] ` <53E83C9E.9060405-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2014-08-11 4:56 ` Jiang Liu [this message]
[not found] ` <53E84CEA.7080402-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-08-11 8:26 ` Yijing Wang
2014-08-11 4:43 ` Alex Williamson
[not found] ` <1407732187.9800.11.camel-85EaTFmN5p//9pzu0YdTqQ@public.gmane.org>
2014-08-11 8:36 ` Yijing Wang
2014-08-11 14:59 ` Linda Knippers
[not found] ` <53E8DA5E.8090406-VXdhtT5mjnY@public.gmane.org>
2014-08-12 1:37 ` Yijing Wang
[not found] ` <53E96FE0.7080600-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2014-08-12 2:34 ` Jiang Liu
2014-08-12 3:18 ` Jiang Liu
[not found] ` <53E9876F.9040300-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-08-12 3:48 ` Yijing Wang
2014-08-14 16:07 ` Linda Knippers
-- strict thread matches above, loose matches on Subject: below --
2014-09-24 21:56 Rob Roschewsk
[not found] ` <1597491265.153338.1411595791727.JavaMail.open-xchange-91tEjvOFe9KcT/DCa4qSTkaJx/dRlJfr5NbjCUgZEJk@public.gmane.org>
2014-09-25 2:36 ` Yijing Wang
[not found] ` <54237F92.1090601-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2014-09-25 13:56 ` Rob Roschewsk
[not found] ` <CAE1O4xrQYpc4o6MbN8b7kkgwTbjj+Pszu5WUwM_vErUfyQYfNw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-09-25 14:29 ` Linda Knippers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53E84CEA.7080402@linux.intel.com \
--to=jiang.liu-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
--cc=wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).