Linux IOMMU Development
 help / color / mirror / Atom feed
From: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
	Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
	David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Subject: Re: [PATCH] x86: irq_remapping: Make functions static
Date: Fri, 12 Sep 2014 17:07:31 +0800	[thread overview]
Message-ID: <5412B7D3.2020704@huawei.com> (raw)
In-Reply-To: <5412B37E.1030207-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

On 2014/9/12 16:49, Jiang Liu wrote:
> Hi Yijing,
> 	There's an effort to refine the remapping interface by
> using hierarchy irqdomain, which plans to kill all these interfaces.
> Please refer to
> https://lkml.org/lkml/2014/9/11/101
> https://lkml.org/lkml/2014/9/11/554

That's nice, I'm preparing to look at it. Joerg, please drop this trivial patch.

Thanks!
Yijing.


> Regards!
> Gerry
> 
> On 2014/9/12 17:05, Yijing Wang wrote:
>> Change local functions to static.
>>
>> Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
>> ---
>>  arch/x86/include/asm/irq_remapping.h |   27 +--------------------------
>>  drivers/iommu/irq_remapping.c        |   34 +++++++++++++++++-----------------
>>  2 files changed, 18 insertions(+), 43 deletions(-)
>>
>> diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
>> index b7747c4..944cba6 100644
>> --- a/arch/x86/include/asm/irq_remapping.h
>> +++ b/arch/x86/include/asm/irq_remapping.h
>> @@ -41,16 +41,7 @@ extern int irq_remapping_enable(void);
>>  extern void irq_remapping_disable(void);
>>  extern int irq_remapping_reenable(int);
>>  extern int irq_remap_enable_fault_handling(void);
>> -extern int setup_ioapic_remapped_entry(int irq,
>> -				       struct IO_APIC_route_entry *entry,
>> -				       unsigned int destination,
>> -				       int vector,
>> -				       struct io_apic_irq_attr *attr);
>>  extern void free_remapped_irq(int irq);
>> -extern void compose_remapped_msi_msg(struct pci_dev *pdev,
>> -				     unsigned int irq, unsigned int dest,
>> -				     struct msi_msg *msg, u8 hpet_id);
>> -extern int setup_hpet_msi_remapped(unsigned int irq, unsigned int id);
>>  extern void panic_if_irq_remap(const char *msg);
>>  extern bool setup_remapped_irq(int irq,
>>  			       struct irq_cfg *cfg,
>> @@ -68,24 +59,8 @@ static inline int irq_remapping_enable(void) { return -ENODEV; }
>>  static inline void irq_remapping_disable(void) { }
>>  static inline int irq_remapping_reenable(int eim) { return -ENODEV; }
>>  static inline int irq_remap_enable_fault_handling(void) { return -ENODEV; }
>> -static inline int setup_ioapic_remapped_entry(int irq,
>> -					      struct IO_APIC_route_entry *entry,
>> -					      unsigned int destination,
>> -					      int vector,
>> -					      struct io_apic_irq_attr *attr)
>> -{
>> -	return -ENODEV;
>> -}
>> +
>>  static inline void free_remapped_irq(int irq) { }
>> -static inline void compose_remapped_msi_msg(struct pci_dev *pdev,
>> -					    unsigned int irq, unsigned int dest,
>> -					    struct msi_msg *msg, u8 hpet_id)
>> -{
>> -}
>> -static inline int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
>> -{
>> -	return -ENODEV;
>> -}
>>  
>>  static inline void panic_if_irq_remap(const char *msg)
>>  {
>> diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
>> index 33c4395..85eb212 100644
>> --- a/drivers/iommu/irq_remapping.c
>> +++ b/drivers/iommu/irq_remapping.c
>> @@ -27,9 +27,7 @@ static struct irq_remap_ops *remap_ops;
>>  static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec);
>>  static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
>>  				  int index, int sub_handle);
>> -static int set_remapped_irq_affinity(struct irq_data *data,
>> -				     const struct cpumask *mask,
>> -				     bool force);
>> +static void __init irq_remapping_modify_x86_ops(void);
>>  
>>  static bool irq_remapped(struct irq_cfg *cfg)
>>  {
>> @@ -159,17 +157,6 @@ static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
>>  	io_apic_eoi(apic, pin);
>>  }
>>  
>> -static void __init irq_remapping_modify_x86_ops(void)
>> -{
>> -	x86_io_apic_ops.disable		= irq_remapping_disable_io_apic;
>> -	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
>> -	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
>> -	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
>> -	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
>> -	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
>> -	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
>> -}
>> -
>>  static __init int setup_nointremap(char *str)
>>  {
>>  	disable_irq_remap = 1;
>> @@ -281,7 +268,7 @@ int __init irq_remap_enable_fault_handling(void)
>>  	return remap_ops->enable_faulting();
>>  }
>>  
>> -int setup_ioapic_remapped_entry(int irq,
>> +static int setup_ioapic_remapped_entry(int irq,
>>  				struct IO_APIC_route_entry *entry,
>>  				unsigned int destination, int vector,
>>  				struct io_apic_irq_attr *attr)
>> @@ -314,7 +301,7 @@ void free_remapped_irq(int irq)
>>  		remap_ops->free_irq(irq);
>>  }
>>  
>> -void compose_remapped_msi_msg(struct pci_dev *pdev,
>> +static void compose_remapped_msi_msg(struct pci_dev *pdev,
>>  			      unsigned int irq, unsigned int dest,
>>  			      struct msi_msg *msg, u8 hpet_id)
>>  {
>> @@ -343,7 +330,7 @@ static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
>>  	return remap_ops->msi_setup_irq(pdev, irq, index, sub_handle);
>>  }
>>  
>> -int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
>> +static int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
>>  {
>>  	if (!remap_ops || !remap_ops->setup_hpet_msi)
>>  		return -ENODEV;
>> @@ -389,3 +376,14 @@ bool setup_remapped_irq(int irq, struct irq_cfg *cfg, struct irq_chip *chip)
>>  	irq_remap_modify_chip_defaults(chip);
>>  	return true;
>>  }
>> +
>> +static void __init irq_remapping_modify_x86_ops(void)
>> +{
>> +	x86_io_apic_ops.disable		= irq_remapping_disable_io_apic;
>> +	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
>> +	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
>> +	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
>> +	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
>> +	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
>> +	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
>> +}
>>
> 
> .
> 


-- 
Thanks!
Yijing

      parent reply	other threads:[~2014-09-12  9:07 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-12  9:05 [PATCH] x86: irq_remapping: Make functions static Yijing Wang
     [not found] ` <1410512734-6369-1-git-send-email-wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2014-09-12  8:49   ` Jiang Liu
     [not found]     ` <5412B37E.1030207-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2014-09-12  9:07       ` Yijing Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5412B7D3.2020704@huawei.com \
    --to=wangyijing-hv44wf8li93qt0dzr+alfa@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
    --cc=jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox