Linux IOMMU Development
 help / color / mirror / Atom feed
From: Jason Gunthorpe <jgg@nvidia.com>
To: Lu Baolu <baolu.lu@linux.intel.com>,
	David Woodhouse <dwmw2@infradead.org>,
	iommu@lists.linux.dev, Joerg Roedel <joro@8bytes.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Will Deacon <will@kernel.org>
Cc: patches@lists.linux.dev, Wei Wang <wei.w.wang@intel.com>
Subject: [PATCH v2 7/7] iommu/vt-d: Split paging_domain_compatible()
Date: Thu, 12 Jun 2025 11:31:39 -0300	[thread overview]
Message-ID: <7-v2-e5c01fc5ce82+26216-vtd_prep_jgg@nvidia.com> (raw)
In-Reply-To: <0-v2-e5c01fc5ce82+26216-vtd_prep_jgg@nvidia.com>

Make First/Second stage specific functions that follow the same pattern in
intel_iommu_domain_alloc_first/second_stage() for computing
EOPNOTSUPP. This makes the code easier to understand as if we couldn't
create a domain with the parameters for this IOMMU instance then we
certainly are not compatible with it.

Check superpage support directly against the per-stage cap bits and the
pgsize_bitmap.

Add a note that the force_snooping is read without locking. The locking
needs to cover the compatible check and the add of the device to the list.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
---
 drivers/iommu/intel/iommu.c | 66 ++++++++++++++++++++++++++++++-------
 1 file changed, 54 insertions(+), 12 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 5fd4b82576ca44..ce8ae89404f313 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -3417,33 +3417,75 @@ static void intel_iommu_domain_free(struct iommu_domain *domain)
 	kfree(dmar_domain);
 }
 
+static int paging_domain_compatible_first_stage(struct dmar_domain *dmar_domain,
+						struct intel_iommu *iommu)
+{
+	if (WARN_ON(dmar_domain->domain.dirty_ops ||
+		    dmar_domain->nested_parent))
+		return -EINVAL;
+
+	/* Only SL is available in legacy mode */
+	if (!sm_supported(iommu) || !ecap_flts(iommu->ecap))
+		return -EINVAL;
+
+	/* Same page size support */
+	if (!cap_fl1gp_support(iommu->cap) &&
+	    (dmar_domain->domain.pgsize_bitmap & SZ_1G))
+		return -EINVAL;
+	return 0;
+}
+
+static int
+paging_domain_compatible_second_stage(struct dmar_domain *dmar_domain,
+				      struct intel_iommu *iommu)
+{
+	unsigned int sslps = cap_super_page_val(iommu->cap);
+
+	if (dmar_domain->domain.dirty_ops && !ssads_supported(iommu))
+		return -EINVAL;
+	if (dmar_domain->nested_parent && !nested_supported(iommu))
+		return -EINVAL;
+
+	/* Legacy mode always supports second stage */
+	if (sm_supported(iommu) && !ecap_slts(iommu->ecap))
+		return -EINVAL;
+
+	/* Same page size support */
+	if (!(sslps & BIT(0)) && (dmar_domain->domain.pgsize_bitmap & SZ_2M))
+		return -EINVAL;
+	if (!(sslps & BIT(1)) && (dmar_domain->domain.pgsize_bitmap & SZ_1G))
+		return -EINVAL;
+	return 0;
+}
+
 int paging_domain_compatible(struct iommu_domain *domain, struct device *dev)
 {
 	struct device_domain_info *info = dev_iommu_priv_get(dev);
 	struct dmar_domain *dmar_domain = to_dmar_domain(domain);
 	struct intel_iommu *iommu = info->iommu;
+	int ret = -EINVAL;
 	int addr_width;
 
-	if (WARN_ON_ONCE(!(domain->type & __IOMMU_DOMAIN_PAGING)))
-		return -EPERM;
+	if (domain->ops == &intel_fs_paging_domain_ops)
+		ret = paging_domain_compatible_first_stage(dmar_domain, iommu);
+	else if (domain->ops == &intel_ss_paging_domain_ops)
+		ret = paging_domain_compatible_second_stage(dmar_domain, iommu);
+	else if (WARN_ON(true))
+		ret = -EINVAL;
+	if (ret)
+		return ret;
 
+	/*
+	 * FIXME this is locked wrong, it needs to be under the
+	 * dmar_domain->lock
+	 */
 	if (dmar_domain->force_snooping && !ecap_sc_support(iommu->ecap))
 		return -EINVAL;
 
-	if (domain->dirty_ops && !ssads_supported(iommu))
-		return -EINVAL;
-
 	if (dmar_domain->iommu_coherency !=
 			iommu_paging_structure_coherency(iommu))
 		return -EINVAL;
 
-	if (dmar_domain->iommu_superpage !=
-			iommu_superpage_capability(iommu, dmar_domain->use_first_level))
-		return -EINVAL;
-
-	if (dmar_domain->use_first_level &&
-	    (!sm_supported(iommu) || !ecap_flts(iommu->ecap)))
-		return -EINVAL;
 
 	/* check if this iommu agaw is sufficient for max mapped address */
 	addr_width = agaw_to_width(iommu->agaw);
-- 
2.43.0


      parent reply	other threads:[~2025-06-12 14:31 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-12 14:31 [PATCH v2 0/7] Reorganize Intel VT-D to be ready for iommupt Jason Gunthorpe
2025-06-12 14:31 ` [PATCH v2 1/7] iommu/vt-d: Lift the __pa to domain_setup_first_level/intel_svm_set_dev_pasid() Jason Gunthorpe
2025-06-13  9:31   ` Tian, Kevin
2025-06-12 14:31 ` [PATCH v2 2/7] iommu/vt-d: Fold domain_exit() into intel_iommu_domain_free() Jason Gunthorpe
2025-06-13  9:32   ` Tian, Kevin
2025-06-12 14:31 ` [PATCH v2 3/7] iommu/vt-d: Do not wipe out the page table NID when devices detach Jason Gunthorpe
2025-06-13  9:33   ` Tian, Kevin
2025-06-12 14:31 ` [PATCH v2 4/7] iommu/vt-d: Split intel_iommu_domain_alloc_paging_flags() Jason Gunthorpe
2025-06-13  9:35   ` Tian, Kevin
2025-06-12 14:31 ` [PATCH v2 5/7] iommu/vt-d: Create unique domain ops for each stage Jason Gunthorpe
2025-06-13  9:38   ` Tian, Kevin
2025-06-13 12:58     ` Jason Gunthorpe
2025-06-12 14:31 ` [PATCH v2 6/7] iommu/vt-d: Split intel_iommu_enforce_cache_coherency() Jason Gunthorpe
2025-06-13  9:56   ` Tian, Kevin
2025-06-13 13:12     ` Jason Gunthorpe
2025-06-30  6:11       ` Baolu Lu
2025-06-30 15:04         ` Jason Gunthorpe
2025-06-12 14:31 ` Jason Gunthorpe [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7-v2-e5c01fc5ce82+26216-vtd_prep_jgg@nvidia.com \
    --to=jgg@nvidia.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=patches@lists.linux.dev \
    --cc=robin.murphy@arm.com \
    --cc=wei.w.wang@intel.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox