From: Andreas Degert <andreas.degert-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
To: Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Subject: Re: soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops)
Date: Tue, 26 Mar 2013 20:40:18 +0100 [thread overview]
Message-ID: <CAHccUrKpMiY4DURL_V2fPD8anz3T8WQT2_0PABu87mCzokpaWA@mail.gmail.com> (raw)
In-Reply-To: <20130326161132.GF2727-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 554 bytes --]
2013/3/26 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> Ah, I see. But still, this device is in the alias range and thus also
> covered by IVRS. It should use 00:14.4 as the request-id.
>
> Can you try the attached debug-patch, boot and send me dmesg again? This
> should sched some light onto the problem.
dmesg output appended. I was wrong, there are io page faults
when I trigger dma transfer with the soundcard, like you expected.
At the end of the dmesg output are the IO_PAGE_FAULT's from
trying to do a playback.
thanks
Andreas
[-- Attachment #2: dmesg_amd_iommu_debug.txt --]
[-- Type: text/plain, Size: 63083 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.4iommu (root@phonus) (gcc version 4.7.2 (Debian 4.7.2-5) ) #5 SMP PREEMPT Tue Mar 26 19:00:19 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4iommu root=UUID=6777b7d9-06b6-4cc8-9bdb-105e3cec9c26 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d85cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d85d000-0x000000009db3cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009db3d000-0x000000009ddfcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ddfd000-0x000000009dea0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009dea1000-0x000000009ea49fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ea4a000-0x000000009ea4afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ea4b000-0x000000009ec50fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ec51000-0x000000009f072fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f073000-0x000000009f7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f7f4000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7721/FM2-A75MA-E35 (MS-7721), BIOS V1.8 02/27/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9f7fffff]
[ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x9f7fffff @ [mem 0x1fffe000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x23effffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x23effffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x23effffff @ [mem 0x9f7fc000-0x9f7fffff]
[ 0.000000] RAMDISK: [mem 0x36ae0000-0x37567fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000009de8e078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000009de94320 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT 000000009de8e178 061A4 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000009de96080 00040
[ 0.000000] ACPI: APIC 000000009de94430 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 000000009de944a8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000009de944f0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 000000009de94530 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 000000009de94568 00D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000009de952a8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: IVRS 000000009de95760 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 000000009de957d0 002F8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff]
[ 0.000000] NODE_DATA [mem 0x23effc000-0x23effffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880236e00000-ffff88023d7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9d85cfff]
[ 0.000000] node 0: [mem 0x9db3d000-0x9ddfcfff]
[ 0.000000] node 0: [mem 0x9ea4a000-0x9ea4afff]
[ 0.000000] node 0: [mem 0x9ec51000-0x9f072fff]
[ 0.000000] node 0: [mem 0x9f7f4000-0x9f7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1953497
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8790 pages used for memmap
[ 0.000000] DMA32 zone: 634102 pages, LIFO batch:31
[ 0.000000] Normal zone: 17864 pages used for memmap
[ 0.000000] Normal zone: 1288759 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009d85d000 - 000000009db3d000
[ 0.000000] PM: Registered nosave memory: 000000009ddfd000 - 000000009dea1000
[ 0.000000] PM: Registered nosave memory: 000000009dea1000 - 000000009ea4a000
[ 0.000000] PM: Registered nosave memory: 000000009ea4b000 - 000000009ec51000
[ 0.000000] PM: Registered nosave memory: 000000009f073000 - 000000009f7f4000
[ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s84032 r8192 d22464 u524288
[ 0.000000] pcpu-alloc: s84032 r8192 d22464 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1926781
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.4iommu root=UUID=6777b7d9-06b6-4cc8-9bdb-105e3cec9c26 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 94000000
[ 0.000000] PM: Registered nosave memory: 0000000094000000 - 0000000098000000
[ 0.000000] Memory: 7554080k/9420800k available (3591k kernel code, 1606812k absent, 259908k reserved, 3147k data, 616k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3392.459 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.91 BogoMIPS (lpj=13569836)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000032] Security Framework initialized
[ 0.000035] AppArmor: AppArmor disabled by boot time parameter
[ 0.000476] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002433] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003335] Mount-cache hash table entries: 256
[ 0.003474] Initializing cgroup subsys cpuacct
[ 0.003476] Initializing cgroup subsys devices
[ 0.003477] Initializing cgroup subsys freezer
[ 0.003479] Initializing cgroup subsys net_cls
[ 0.003480] Initializing cgroup subsys blkio
[ 0.003481] Initializing cgroup subsys perf_event
[ 0.003504] tseg: 009f800000
[ 0.003505] CPU: Physical Processor ID: 0
[ 0.003506] CPU: Processor Core ID: 0
[ 0.003508] mce: CPU supports 7 MCE banks
[ 0.003520] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.003520] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.003520] tlb_flushall_shift: 5
[ 0.003579] Freeing SMP alternatives: 8k freed
[ 0.003785] ACPI: Core revision 20121018
[ 0.099616] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.139192] smpboot: CPU0: AMD A10-5700 APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.246346] Performance Events:
[ 0.246347] perf: AMD core performance counters detected
[ 0.246350] AMD PMU driver.
[ 0.246352] ... version: 0
[ 0.246353] ... bit width: 48
[ 0.246354] ... generic registers: 6
[ 0.246355] ... value mask: 0000ffffffffffff
[ 0.246356] ... max period: 00007fffffffffff
[ 0.246357] ... fixed-purpose events: 0
[ 0.246358] ... event mask: 000000000000003f
[ 0.270489] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.278439] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.331336] Brought up 4 CPUs
[ 0.331339] smpboot: Total of 4 processors activated (27139.67 BogoMIPS)
[ 0.332231] devtmpfs: initialized
[ 0.334486] PM: Registering ACPI NVS region [mem 0x9ddfd000-0x9dea0fff] (671744 bytes)
[ 0.334503] PM: Registering ACPI NVS region [mem 0x9ea4b000-0x9ec50fff] (2121728 bytes)
[ 0.334643] regulator-dummy: no parameters
[ 0.334701] NET: Registered protocol family 16
[ 0.334835] ACPI: bus type pci registered
[ 0.334881] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.334883] PCI: not using MMCONFIG
[ 0.334885] PCI: Using configuration type 1 for base access
[ 0.334886] PCI: Using configuration type 1 for extended access
[ 0.335600] bio: create slab <bio-0> at 0
[ 0.335689] ACPI: Added _OSI(Module Device)
[ 0.335691] ACPI: Added _OSI(Processor Device)
[ 0.335693] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.335694] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.336365] ACPI: EC: Look up EC in DSDT
[ 0.337155] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.339948] ACPI: Interpreter enabled
[ 0.339951] ACPI: (supports S0 S3 S4 S5)
[ 0.339967] ACPI: Using IOAPIC for interrupt routing
[ 0.340084] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.340117] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.375915] ACPI: No dock devices found.
[ 0.375920] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.376063] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.376065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.376364] pci_root PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.376493] pci_root PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.376694] PCI host bridge to bus 0000:00
[ 0.376697] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.376699] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.376701] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.376702] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.376704] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.376706] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.376707] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.376709] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.376716] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.376744] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.376795] pci 0000:00:01.0: [1002:9901] type 00 class 0x030000
[ 0.376801] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.376806] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.376811] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.376841] pci 0000:00:01.0: supports D1 D2
[ 0.376854] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.376860] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.376896] pci 0000:00:01.1: supports D1 D2
[ 0.376913] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.376947] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.376962] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.376997] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.377032] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.377049] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[ 0.377136] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.377172] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 0.377189] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 0.377276] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.377309] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.377324] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.377331] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.377339] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.377346] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.377354] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.377361] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
[ 0.377408] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.377419] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
[ 0.377476] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.377490] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
[ 0.377555] pci 0000:00:12.2: supports D1 D2
[ 0.377557] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.377576] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.377587] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
[ 0.377645] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.377660] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 0.377724] pci 0000:00:13.2: supports D1 D2
[ 0.377726] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.377745] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.377806] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.377823] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.377874] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.377887] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.377948] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.377996] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.378007] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 0.378071] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.378087] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.378102] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.378117] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.378136] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.378151] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.378207] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.378219] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.378238] pci 0000:01:00.0: reg 18: [mem 0xfea04000-0xfea04fff 64bit pref]
[ 0.378251] pci 0000:01:00.0: reg 20: [mem 0xfea00000-0xfea03fff 64bit pref]
[ 0.378304] pci 0000:01:00.0: supports D1 D2
[ 0.378305] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.386045] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.386052] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.386055] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.386102] pci 0000:02:00.0: [168c:002e] type 00 class 0x028000
[ 0.386120] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe90ffff 64bit]
[ 0.386196] pci 0000:02:00.0: supports D1
[ 0.386198] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.394021] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.394028] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.394067] pci 0000:03:05.0: [1180:0475] type 02 class 0x060700
[ 0.394086] pci 0000:03:05.0: reg 10: [mem 0xfe800000-0xfe800fff]
[ 0.394118] pci 0000:03:05.0: supports D1 D2
[ 0.394120] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.394162] pci 0000:00:14.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.394166] pci 0000:00:14.4: bridge window [io 0xc000-0xdfff]
[ 0.394169] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfe8fffff]
[ 0.394173] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd13fffff pref]
[ 0.394175] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.394176] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.394178] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.394180] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.394182] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.394183] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.394185] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.394217] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 03-04] (conflicts with (null) [bus 03-04])
[ 0.394221] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[ 0.394223] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 03-04] (conflicts with (null) [bus 03-04])
[ 0.394227] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
[ 0.394260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.394339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 0.394363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT]
[ 0.394387] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.399443] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399497] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399551] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399602] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399643] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399675] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399706] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399737] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.399816] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.399821] vgaarb: loaded
[ 0.399822] vgaarb: bridge control possible 0000:00:01.0
[ 0.399857] PCI: Using ACPI for IRQ routing
[ 0.406561] PCI: pci_cache_line_size set to 64 bytes
[ 0.406619] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.406621] e820: reserve RAM buffer [mem 0x9d85d000-0x9fffffff]
[ 0.406623] e820: reserve RAM buffer [mem 0x9ddfd000-0x9fffffff]
[ 0.406624] e820: reserve RAM buffer [mem 0x9ea4b000-0x9fffffff]
[ 0.406626] e820: reserve RAM buffer [mem 0x9f073000-0x9fffffff]
[ 0.406627] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[ 0.406628] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.406715] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.406718] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.408735] Switching to clocksource hpet
[ 0.410360] pnp: PnP ACPI init
[ 0.410371] ACPI: bus type pnp registered
[ 0.410451] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.410454] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.410863] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.410865] system 00:01: [io 0x040b] has been reserved
[ 0.410867] system 00:01: [io 0x04d6] has been reserved
[ 0.410869] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.410871] system 00:01: [io 0x0c14] has been reserved
[ 0.410873] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.410875] system 00:01: [io 0x0c52] has been reserved
[ 0.410877] system 00:01: [io 0x0c6c] has been reserved
[ 0.410879] system 00:01: [io 0x0c6f] has been reserved
[ 0.410881] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.410883] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.410885] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.410887] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.410890] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.410891] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.410893] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.410895] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.410897] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.410899] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.410902] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.410904] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.410907] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.410909] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.410911] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.410913] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.410916] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.410918] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411021] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.411023] system 00:02: [io 0x0600-0x060f] has been reserved
[ 0.411026] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411075] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.411298] pnp 00:04: [dma 0 disabled]
[ 0.411332] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.411568] pnp 00:05: [dma 3]
[ 0.411654] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.411663] pnp 00:06: [dma 4]
[ 0.411678] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.411703] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.411722] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.411765] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.411767] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411792] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.411821] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411933] system 00:0c: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.411935] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411998] system 00:0d: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.412000] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412125] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.412128] pnp: PnP ACPI: found 15 devices
[ 0.412129] ACPI: ACPI bus type pnp unregistered
[ 0.418361] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.418364] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.418367] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.418371] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.418374] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.418380] pci 0000:03:05.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.418382] pci 0000:03:05.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.418384] pci 0000:03:05.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.418386] pci 0000:03:05.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.418390] pci 0000:03:05.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref]
[ 0.418393] pci 0000:03:05.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff]
[ 0.418395] pci 0000:03:05.0: BAR 13: assigned [io 0xc000-0xc0ff]
[ 0.418397] pci 0000:03:05.0: BAR 14: assigned [io 0xc400-0xc4ff]
[ 0.418399] pci 0000:03:05.0: CardBus bridge to [bus 04-07]
[ 0.418400] pci 0000:03:05.0: bridge window [io 0xc000-0xc0ff]
[ 0.418404] pci 0000:03:05.0: bridge window [io 0xc400-0xc4ff]
[ 0.418408] pci 0000:03:05.0: bridge window [mem 0xd4000000-0xd7ffffff pref]
[ 0.418412] pci 0000:03:05.0: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.418416] pci 0000:00:14.4: PCI bridge to [bus 03-04]
[ 0.418419] pci 0000:00:14.4: bridge window [io 0xc000-0xdfff]
[ 0.418423] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfe8fffff]
[ 0.418426] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd13fffff pref]
[ 0.418463] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.418465] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.418466] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.418468] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.418470] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.418471] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.418473] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.418474] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.418476] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.418477] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.418479] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
[ 0.418480] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfe8fffff]
[ 0.418482] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd13fffff pref]
[ 0.418483] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.418485] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.418486] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.418487] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.418489] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.418490] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.418492] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.418493] pci_bus 0000:04: resource 0 [io 0xc000-0xc0ff]
[ 0.418495] pci_bus 0000:04: resource 1 [io 0xc400-0xc4ff]
[ 0.418496] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[ 0.418498] pci_bus 0000:04: resource 3 [mem 0xd8000000-0xdbffffff]
[ 0.418624] NET: Registered protocol family 2
[ 0.418838] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419123] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419333] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.419367] TCP: reno registered
[ 0.419380] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.419418] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.419576] NET: Registered protocol family 1
[ 0.419590] pci 0000:00:01.0: Boot video device
[ 0.660241] PCI: CLS 64 bytes, default 64
[ 0.660286] Unpacking initramfs...
[ 0.820404] Freeing initrd memory: 10784k freed
[ 0.822732] AMD-Vi: Device 0000:00:00.2 has no responsible IOMMU
[ 0.822865] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.822866] AMD-Vi: Extended features: PreF PPR GT IA
[ 0.822869] AMD-Vi: Interrupt remapping enabled
[ 0.822895] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 0.823605] AMD-Vi: Device 0000:00:00.2 has no responsible IOMMU
[ 0.830052] AMD-Vi: Initializing 0000:00:00.0 to amd_iommu_dma_ops
[ 0.830055] AMD-Vi: Device 0000:00:00.2 has no responsible IOMMU
[ 0.830087] AMD-Vi: Initializing 0000:00:01.0 to amd_iommu_dma_ops
[ 0.830088] AMD-Vi: Initializing 0000:00:01.1 to amd_iommu_dma_ops
[ 0.830090] AMD-Vi: Initializing 0000:00:04.0 to amd_iommu_dma_ops
[ 0.830091] AMD-Vi: Initializing 0000:00:05.0 to amd_iommu_dma_ops
[ 0.830092] AMD-Vi: Initializing 0000:00:10.0 to amd_iommu_dma_ops
[ 0.830093] AMD-Vi: Initializing 0000:00:10.1 to amd_iommu_dma_ops
[ 0.830095] AMD-Vi: Initializing 0000:00:11.0 to amd_iommu_dma_ops
[ 0.830096] AMD-Vi: Initializing 0000:00:12.0 to amd_iommu_dma_ops
[ 0.830097] AMD-Vi: Initializing 0000:00:12.2 to amd_iommu_dma_ops
[ 0.830098] AMD-Vi: Initializing 0000:00:13.0 to amd_iommu_dma_ops
[ 0.830100] AMD-Vi: Initializing 0000:00:13.2 to amd_iommu_dma_ops
[ 0.830101] AMD-Vi: Initializing 0000:00:14.0 to amd_iommu_dma_ops
[ 0.830102] AMD-Vi: Initializing 0000:00:14.2 to amd_iommu_dma_ops
[ 0.830103] AMD-Vi: Initializing 0000:00:14.3 to amd_iommu_dma_ops
[ 0.830105] AMD-Vi: Initializing 0000:00:14.4 to amd_iommu_dma_ops
[ 0.830106] AMD-Vi: Initializing 0000:00:14.5 to amd_iommu_dma_ops
[ 0.830107] AMD-Vi: Initializing 0000:00:18.0 to amd_iommu_dma_ops
[ 0.830108] AMD-Vi: Initializing 0000:00:18.1 to amd_iommu_dma_ops
[ 0.830109] AMD-Vi: Initializing 0000:00:18.2 to amd_iommu_dma_ops
[ 0.830110] AMD-Vi: Initializing 0000:00:18.3 to amd_iommu_dma_ops
[ 0.830111] AMD-Vi: Initializing 0000:00:18.4 to amd_iommu_dma_ops
[ 0.830112] AMD-Vi: Initializing 0000:00:18.5 to amd_iommu_dma_ops
[ 0.830113] AMD-Vi: Initializing 0000:01:00.0 to amd_iommu_dma_ops
[ 0.830114] AMD-Vi: Initializing 0000:02:00.0 to amd_iommu_dma_ops
[ 0.830115] AMD-Vi: Initializing 0000:03:05.0 to amd_iommu_dma_ops
[ 0.830116] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.830585] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.830588] software IO TLB [mem 0x9985d000-0x9d85d000] (64MB) mapped at [ffff88009985d000-ffff88009d85cfff]
[ 0.830795] LVT offset 0 assigned for vector 0x400
[ 0.830819] perf: AMD IBS detected (0x000000ff)
[ 0.830996] audit: initializing netlink socket (disabled)
[ 0.831013] type=2000 audit(1364323805.636:1): initialized
[ 0.841919] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.842150] VFS: Disk quotas dquot_6.5.2
[ 0.842170] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.842239] msgmni has been set to 14775
[ 0.842441] alg: No test for stdrng (krng)
[ 0.842465] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.842466] io scheduler noop registered
[ 0.842467] io scheduler deadline registered
[ 0.842485] io scheduler cfq registered (default)
[ 0.842606] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.842619] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.842620] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.842875] GHES: HEST is not enabled!
[ 0.843008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.863283] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.863749] Linux agpgart interface v0.103
[ 0.863827] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.863829] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.863949] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.864034] mousedev: PS/2 mouse device common for all mice
[ 0.864065] rtc_cmos 00:07: RTC can wake from S4
[ 0.864155] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.864175] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.864183] cpuidle: using governor ladder
[ 0.864184] cpuidle: using governor menu
[ 0.864208] drop_monitor: Initializing network drop monitor service
[ 0.864260] TCP: cubic registered
[ 0.864307] NET: Registered protocol family 10
[ 0.864455] mip6: Mobile IPv6
[ 0.864457] NET: Registered protocol family 17
[ 0.864466] Key type dns_resolver registered
[ 0.864735] PM: Hibernation image not present or could not be loaded.
[ 0.864742] registered taskstats version 1
[ 0.865097] rtc_cmos 00:07: setting system clock to 2013-03-26 18:50:06 UTC (1364323806)
[ 0.866001] Freeing unused kernel memory: 616k freed
[ 0.866113] Write protecting the kernel read-only data: 6144k
[ 0.867555] Freeing unused kernel memory: 496k freed
[ 0.869112] Freeing unused kernel memory: 572k freed
[ 0.879399] udevd[68]: starting version 175
[ 0.885062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.899327] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.899542] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[ 0.899716] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c1a000, d4:3d:7e:53:cb:b8, XID 0c900800 IRQ 41
[ 0.899719] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.903563] ACPI: bus type usb registered
[ 0.903586] usbcore: registered new interface driver usbfs
[ 0.903594] usbcore: registered new interface driver hub
[ 0.904486] usbcore: registered new device driver usb
[ 0.904915] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.904923] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.904956] QUIRK: Enable AMD PLL fix
[ 0.905139] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 0.905194] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 0.905204] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 0.905212] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 0.905220] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 0.905228] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[ 0.905336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.905340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.905342] usb usb1: Product: xHCI Host Controller
[ 0.905345] usb usb1: Manufacturer: Linux 3.8.4iommu xhci_hcd
[ 0.905347] usb usb1: SerialNumber: 0000:00:10.0
[ 0.905439] xHCI xhci_add_endpoint called for root hub
[ 0.905442] xHCI xhci_check_bandwidth called for root hub
[ 0.905571] hub 1-0:1.0: USB hub found
[ 0.905579] hub 1-0:1.0: 2 ports detected
[ 0.905667] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.905672] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.906748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.906987] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.907969] SCSI subsystem initialized
[ 0.908546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.908549] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.908552] usb usb2: Product: xHCI Host Controller
[ 0.908554] usb usb2: Manufacturer: Linux 3.8.4iommu xhci_hcd
[ 0.908556] usb usb2: SerialNumber: 0000:00:10.0
[ 0.908648] xHCI xhci_add_endpoint called for root hub
[ 0.908650] xHCI xhci_check_bandwidth called for root hub
[ 0.908677] hub 2-0:1.0: USB hub found
[ 0.908684] hub 2-0:1.0: 2 ports detected
[ 0.909099] ACPI: bus type scsi registered
[ 0.910361] libata version 3.00 loaded.
[ 0.931473] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.931482] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.931686] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 0.931743] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[ 0.931752] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 0.931760] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 0.931767] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 0.931774] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 0.931881] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.931885] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.931887] usb usb3: Product: xHCI Host Controller
[ 0.931890] usb usb3: Manufacturer: Linux 3.8.4iommu xhci_hcd
[ 0.931892] usb usb3: SerialNumber: 0000:00:10.1
[ 0.931979] xHCI xhci_add_endpoint called for root hub
[ 0.931980] xHCI xhci_check_bandwidth called for root hub
[ 0.932005] hub 3-0:1.0: USB hub found
[ 0.932011] hub 3-0:1.0: 2 ports detected
[ 0.932084] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.932088] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 0.935078] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.935080] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.935082] usb usb4: Product: xHCI Host Controller
[ 0.935084] usb usb4: Manufacturer: Linux 3.8.4iommu xhci_hcd
[ 0.935085] usb usb4: SerialNumber: 0000:00:10.1
[ 0.935236] xHCI xhci_add_endpoint called for root hub
[ 0.935238] xHCI xhci_check_bandwidth called for root hub
[ 0.935258] hub 4-0:1.0: USB hub found
[ 0.935265] hub 4-0:1.0: 2 ports detected
[ 0.967430] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.967440] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 0.967473] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 1.027209] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.027213] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.027216] usb usb5: Product: OHCI Host Controller
[ 1.027217] usb usb5: Manufacturer: Linux 3.8.4iommu ohci_hcd
[ 1.027219] usb usb5: SerialNumber: 0000:00:12.0
[ 1.027370] hub 5-0:1.0: USB hub found
[ 1.027377] hub 5-0:1.0: 5 ports detected
[ 1.027509] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.027514] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.027531] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 1.087061] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.087065] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.087067] usb usb6: Product: OHCI Host Controller
[ 1.087069] usb usb6: Manufacturer: Linux 3.8.4iommu ohci_hcd
[ 1.087070] usb usb6: SerialNumber: 0000:00:13.0
[ 1.087357] hub 6-0:1.0: USB hub found
[ 1.087366] hub 6-0:1.0: 5 ports detected
[ 1.087508] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.087513] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.087530] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 1.146883] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.146887] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.146890] usb usb7: Product: OHCI Host Controller
[ 1.146891] usb usb7: Manufacturer: Linux 3.8.4iommu ohci_hcd
[ 1.146893] usb usb7: SerialNumber: 0000:00:14.5
[ 1.147030] hub 7-0:1.0: USB hub found
[ 1.147037] hub 7-0:1.0: 2 ports detected
[ 1.147120] ahci 0000:00:11.0: version 3.0
[ 1.147202] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
[ 1.147307] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.147311] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.148378] scsi0 : ahci
[ 1.148465] scsi1 : ahci
[ 1.148542] scsi2 : ahci
[ 1.148600] scsi3 : ahci
[ 1.148656] scsi4 : ahci
[ 1.148717] scsi5 : ahci
[ 1.148771] ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 52
[ 1.148775] ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 52
[ 1.148778] ata3: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 52
[ 1.148782] ata4: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 52
[ 1.148785] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 52
[ 1.148787] ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 52
[ 1.422110] usb 6-2: new low-speed USB device number 2 using ohci_hcd
[ 1.466022] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.466054] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.466087] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.466121] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.466152] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.588768] usb 6-2: New USB device found, idVendor=046d, idProduct=c05b
[ 1.588772] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.588774] usb 6-2: Product: USB Optical Mouse
[ 1.588776] usb 6-2: Manufacturer: Logitech
[ 1.596816] usbcore: registered new interface driver usbhid
[ 1.596819] usbhid: USB HID core driver
[ 1.598534] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/input/input1
[ 1.598628] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 1.637520] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.638531] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
[ 1.638535] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.639073] ata1.00: configured for UDMA/133
[ 1.639206] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
[ 1.643191] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.643264] sd 0:0:0:0: [sda] Write Protect is off
[ 1.643267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.643293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.643793] sda: sda1 sda2 < sda5 >
[ 1.644137] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.645616] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.678329] PM: Starting manual resume from disk
[ 1.678332] PM: Hibernation image partition 8:5 present
[ 1.678334] PM: Looking for hibernation image.
[ 1.678495] PM: Image not found (code -22)
[ 1.678496] PM: Hibernation image not present or could not be loaded.
[ 1.693285] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.725208] usb 6-3: new full-speed USB device number 3 using ohci_hcd
[ 1.825022] tsc: Refined TSC clocksource calibration: 3392.620 MHz
[ 1.825027] Switching to clocksource tsc
[ 1.838131] udevd[372]: starting version 175
[ 1.884483] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.884490] ACPI: Power Button [PWRB]
[ 1.884548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.884552] ACPI: Power Button [PWRF]
[ 1.884814] ACPI: acpi_idle registered with cpuidle
[ 1.891851] usb 6-3: New USB device found, idVendor=1397, idProduct=00bc
[ 1.891857] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.891860] usb 6-3: Product: BCF2000
[ 1.891862] usb 6-3: Manufacturer: BEHRINGER
[ 1.907487] parport_pc 00:05: reported by Plug and Play ACPI
[ 1.907531] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 1.925264] wmi: Mapper loaded
[ 1.925784] ehci-pci: EHCI PCI platform driver
[ 1.925817] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.925824] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 8
[ 1.925829] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.925839] ehci-pci 0000:00:12.2: debug port 1
[ 1.925873] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 1.929754] cfg80211: Calling CRDA to update world regulatory domain
[ 1.936614] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.936642] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.936645] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.936648] usb usb8: Product: EHCI Host Controller
[ 1.936650] usb usb8: Manufacturer: Linux 3.8.4iommu ehci_hcd
[ 1.936652] usb usb8: SerialNumber: 0000:00:12.2
[ 1.941179] hub 8-0:1.0: USB hub found
[ 1.941188] hub 8-0:1.0: 5 ports detected
[ 1.941350] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.941356] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 9
[ 1.941362] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.941381] ehci-pci 0000:00:13.2: debug port 1
[ 1.941423] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 1.945234] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.946510] microcode: CPU0: patch_level=0x06001119
[ 1.952668] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.952703] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.952707] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.952710] usb usb9: Product: EHCI Host Controller
[ 1.952713] usb usb9: Manufacturer: Linux 3.8.4iommu ehci_hcd
[ 1.952716] usb usb9: SerialNumber: 0000:00:13.2
[ 1.972691] hub 9-0:1.0: USB hub found
[ 1.972698] hub 9-0:1.0: 5 ports detected
[ 1.973101] hda-intel 0000:00:01.1: Force to non-snoop mode
[ 1.973168] snd_hda_intel 0000:00:01.1: irq 53 for MSI/MSI-X
[ 1.974033] yenta_cardbus 0000:03:05.0: CardBus bridge found [0000:0000]
[ 1.981423] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 2.012363] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 2.014969] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 2.015045] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 2.015107] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 2.015172] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 2.015774] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 2.015818] microcode: CPU1: patch_level=0x06001119
[ 2.015832] microcode: CPU2: patch_level=0x06001119
[ 2.015838] microcode: CPU3: patch_level=0x06001119
[ 2.015873] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.016506] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 2.016769] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 2.016977] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 2.018243] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.032757] cfg80211: World regulatory domain updated:
[ 2.032760] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.032763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.032766] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.032769] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.032771] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.032773] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.033165] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.053138] kvm: Nested Virtualization enabled
[ 2.053144] kvm: Nested Paging enabled
[ 2.056079] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.062652] usbcore: registered new interface driver snd-usb-audio
[ 2.064426] ath: EEPROM regdomain: 0x809c
[ 2.064429] ath: EEPROM indicates we should expect a country code
[ 2.064432] ath: doing EEPROM country->regdmn map search
[ 2.064433] ath: country maps to regdmn code: 0x52
[ 2.064436] ath: Country alpha2 being used: CN
[ 2.064437] ath: Regpair used: 0x52
[ 2.068622] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 2.068805] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90010f00000, irq=17
[ 2.068952] cfg80211: Calling CRDA for country: CN
[ 2.075085] cfg80211: Regulatory domain changed to country: CN
[ 2.075089] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.075091] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2.075093] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 2.076243] usb 6-2: USB disconnect, device number 2
[ 2.100915] yenta_cardbus 0000:03:05.0: ISA IRQ mask 0x0000, PCI irq 20
[ 2.100922] yenta_cardbus 0000:03:05.0: Socket status: 30000820
[ 2.100927] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 2.100941] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [io 0xc000-0xdfff]
[ 2.100946] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [mem 0xfd400000-0xfe8fffff]
[ 2.100950] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfd400000-0xfe8fffff:
[ 2.100965] excluding 0xfe7b0000-0xfe8fffff
[ 2.100971] yenta_cardbus 0000:03:05.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd13fffff pref]
[ 2.100975] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd13fffff:
[ 2.100992] excluding 0xd0000000-0xd13fffff
[ 2.108776] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 2.108792] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 2.108850] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 2.108874] excluding 0xa0000000-0xa0ffffff
[ 2.108914] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 2.108942] excluding 0x60000000-0x60ffffff
[ 2.239884] usb 6-3: USB disconnect, device number 3
[ 2.462310] Adding 10157052k swap on /dev/sda5. Priority:-1 extents:1 across:10157052k SS
[ 2.489149] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 2.544009] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.586469] [drm] Initialized drm 1.1.0 20060810
[ 2.602845] [drm] radeon kernel modesetting enabled.
[ 2.603278] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1462:0x7721).
[ 2.603360] [drm] register mmio base: 0xFEB00000
[ 2.603364] [drm] register mmio size: 262144
[ 2.603660] ATOM BIOS: 113
[ 2.603702] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 2.603710] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 2.604823] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.604829] [drm] RAM width 64bits DDR
[ 2.605329] [TTM] Zone kernel: Available graphics memory: 3783278 kiB
[ 2.605336] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.605340] [TTM] Initializing pool allocator
[ 2.605351] [TTM] Initializing DMA pool allocator
[ 2.605404] [drm] radeon: 512M of VRAM memory ready
[ 2.605408] [drm] radeon: 512M of GTT memory ready.
[ 2.605450] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.605456] [drm] Driver supports precise vblank timestamp query.
[ 2.605528] radeon 0000:00:01.0: irq 54 for MSI/MSI-X
[ 2.605550] radeon 0000:00:01.0: radeon: using MSI.
[ 2.605849] [drm] radeon: irq initialized.
[ 2.605864] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.607433] [drm] Loading ARUBA Microcode
[ 2.641317] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 2.641436] radeon 0000:00:01.0: WB enabled
[ 2.641439] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880234f21c00
[ 2.641442] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff880234f21c04
[ 2.641444] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff880234f21c08
[ 2.641446] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880234f21c0c
[ 2.641448] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff880234f21c10
[ 2.660499] [drm] ring test on 0 succeeded in 2 usecs
[ 2.660560] [drm] ring test on 3 succeeded in 2 usecs
[ 2.660568] [drm] ring test on 4 succeeded in 1 usecs
[ 2.679903] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.680447] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.680980] [drm] ib test on ring 4 succeeded in 1 usecs
[ 2.683354] [drm] Radeon Display Connectors
[ 2.683361] [drm] Connector 0:
[ 2.683366] [drm] HDMI-A-1
[ 2.683700] [drm] HPD1
[ 2.683707] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.683710] [drm] Encoders:
[ 2.683714] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.683717] [drm] Connector 1:
[ 2.683721] [drm] VGA-1
[ 2.683724] [drm] HPD2
[ 2.683729] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.683732] [drm] Encoders:
[ 2.683735] [drm] CRT1: INTERNAL_UNIPHY2
[ 2.683738] [drm] CRT1: NUTMEG
[ 2.683741] [drm] Connector 2:
[ 2.683744] [drm] DVI-D-1
[ 2.683748] [drm] HPD3
[ 2.683752] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 2.683755] [drm] Encoders:
[ 2.683758] [drm] DFP2: INTERNAL_UNIPHY
[ 2.735745] [drm] Internal thermal controller without fan control
[ 2.735776] [drm] radeon: power management initialized
[ 2.806265] usb 6-2: new low-speed USB device number 4 using ohci_hcd
[ 2.900963] [drm] fb mappable at 0xC114C000
[ 2.900967] [drm] vram apper at 0xC0000000
[ 2.900968] [drm] size 3145728
[ 2.900969] [drm] fb depth is 24
[ 2.900971] [drm] pitch is 4096
[ 2.901041] fbcon: radeondrmfb (fb0) is primary device
[ 2.972874] usb 6-2: New USB device found, idVendor=046d, idProduct=c05b
[ 2.972879] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.972882] usb 6-2: Product: USB Optical Mouse
[ 2.972885] usb 6-2: Manufacturer: Logitech
[ 2.980310] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/input/input14
[ 2.980562] hid-generic 0003:046D:C05B.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 2.989781] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 2.989809] pci 0000:04:00.0: [10ee:3fc5] type 00 class 0x040100
[ 2.989839] pci 0000:04:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[ 2.989963] pci 0000:04:00.0: BAR 0: assigned [mem 0xd8000000-0xd800ffff]
[ 2.989984] pci 0000:04:00.0: cache line size of 64 is not supported
[ 2.990043] AMD-Vi: Adding device 0000:04:00.0
[ 2.990069] AMD-Vi: Already dma_domain for 0000:04:00.0
[ 2.995969] snd_hdsp 0000:04:00.0: enabling device (0000 -> 0002)
[ 3.027326] Console: switching to colour frame buffer device 128x48
[ 3.032072] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.032078] radeon 0000:00:01.0: registered panic notifier
[ 3.032088] [drm] Initialized radeon 2.29.0 20080528 for 0000:00:01.0 on minor 0
[ 3.049477] loop: module loaded
[ 3.241030] usb 6-3: new full-speed USB device number 5 using ohci_hcd
[ 3.407685] usb 6-3: New USB device found, idVendor=1397, idProduct=00bc
[ 3.407697] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.407704] usb 6-3: Product: BCF2000
[ 3.407711] usb 6-3: Manufacturer: BEHRINGER
[ 3.485792] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.306881] wlan0: authenticate with 00:12:bf:b5:6c:86
[ 4.314358] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 4.322507] wlan0: send auth to 00:12:bf:b5:6c:86 (try 1/3)
[ 4.325114] wlan0: authenticated
[ 4.326094] wlan0: associate with 00:12:bf:b5:6c:86 (try 1/3)
[ 4.340461] wlan0: RX AssocResp from 00:12:bf:b5:6c:86 (capab=0x431 status=0 aid=2)
[ 4.340547] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4.340642] wlan0: associated
[ 5.534807] Hammerfall-DSP: Firmware already present, initializing card.
[ 8.378332] RPC: Registered named UNIX socket transport module.
[ 8.378339] RPC: Registered udp transport module.
[ 8.378345] RPC: Registered tcp transport module.
[ 8.378349] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.384074] FS-Cache: Loaded
[ 8.393826] FS-Cache: Netfs 'nfs' registered for caching
[ 8.404151] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.079407] Bluetooth: Core ver 2.16
[ 9.079462] NET: Registered protocol family 31
[ 9.079464] Bluetooth: HCI device and connection manager initialized
[ 9.079472] Bluetooth: HCI socket layer initialized
[ 9.079476] Bluetooth: L2CAP socket layer initialized
[ 9.079482] Bluetooth: SCO socket layer initialized
[ 9.087390] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.087393] Bluetooth: BNEP filters: protocol multicast
[ 9.087402] Bluetooth: BNEP socket layer initialized
[ 9.091876] Bluetooth: RFCOMM TTY layer initialized
[ 9.091887] Bluetooth: RFCOMM socket layer initialized
[ 9.091890] Bluetooth: RFCOMM ver 1.11
[ 9.234562] r8169 0000:01:00.0 eth0: link down
[ 9.234664] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 94.322779] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00000 flags=0x0000]
[ 94.323685] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00080 flags=0x0000]
[ 94.324492] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00040 flags=0x0000]
[ 94.325297] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c000c0 flags=0x0000]
[ 94.326124] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00000 flags=0x0000]
[ 94.326962] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00080 flags=0x0000]
[ 94.327734] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00040 flags=0x0000]
[ 94.328494] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c000c0 flags=0x0000]
[ 94.329244] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c00100 flags=0x0000]
[ 94.330028] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c10000 flags=0x0000]
[ 94.330936] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c10080 flags=0x0000]
[ 94.331856] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x0011 address=0x0000000036c10040 flags=0x0000]
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next prev parent reply other threads:[~2013-03-26 19:40 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 7:37 soundcard (dma) stopped working with commit 27c2127 (x86/amd-iommu: Use only per-device dma_ops) Andreas Degert
[not found] ` <CAHccUrL2_JLMyYzzBYUdUGy0VVRRk90u9_MyknPKcRJpr_ZDfQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-26 9:49 ` Joerg Roedel
[not found] ` <20130326094930.GD13035-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2013-03-26 12:48 ` Andreas Degert
[not found] ` <CAHccUr+w1_65uBXLcmZLrPOgbC8Ldk8+PKxaRLv03rBYxBRDkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-26 14:23 ` Joerg Roedel
[not found] ` <20130326142336.GE13035-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2013-03-26 15:20 ` Andreas Degert
[not found] ` <CAHccUrKmtjqBZVb1+1O5c4j6_9Er5Ow4tPRhExCW-g_kaV1-3A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-26 16:11 ` Joerg Roedel
[not found] ` <20130326161132.GF2727-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2013-03-26 19:40 ` Andreas Degert [this message]
[not found] ` <CAHccUrKpMiY4DURL_V2fPD8anz3T8WQT2_0PABu87mCzokpaWA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-26 20:30 ` Joerg Roedel
[not found] ` <20130326203054.GA30540-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2013-03-27 7:14 ` Andreas Degert
[not found] ` <CAHccUr+MkODo0_Tci9sDEyXNBHu7CyqnVCamauvDESC_QL22HQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-03-27 8:28 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHccUrKpMiY4DURL_V2fPD8anz3T8WQT2_0PABu87mCzokpaWA@mail.gmail.com \
--to=andreas.degert-gm/ye1e23mwn+bqq9rbeug@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).