Re: [PATCH v7 00/36] MT8195 and MT8186 IOMMU SUPPORT

[Matthias Brugger <matthias.bgg@gmail.com>]

On 03/05/2022 09:13, Yong Wu wrote:
> This patchset adds MT8195 and MT8186 iommu support.
> 
> MT8195 have 3 IOMMU HWs. 2 IOMMU HW is for multimedia, and 1 IOMMU HW is
> for infra-master, like PCIe/USB.
> 
> About the 2 MM IOMMU HW, something like this:
> 
>          IOMMU(VDO)          IOMMU(VPP)
>             |                   |
>        SMI_COMMON(VDO)      SMI_COMMON(VPP)
>        ---------------     ----------------
>        |      |   ...      |      |     ...
>      larb0 larb2  ...    larb1 larb3    ...
> 
> these two MM IOMMU HW share a pgtable.
> 
> About the INFRA IOMMU, it don't have larbs, the master connects the iommu
> directly. It use a independent pgtable.
> 
> Also, mt8195 IOMMU bank supports. Normally the IOMMU register size only
> is 0x1000. In this IOMMU HW, the register size is 5 * 0x1000. each 0x1000
> is a bank. the banks' register look like this:
>       ----------------------------------------
>       |bank0  | bank1 | bank2 | bank3 | bank4|
>       ----------------------------------------
>       |global |
>       |control|         null
>       |regs   |
>       -----------------------------------------
>       |bank   |bank   |bank   |bank   |bank   |
>       |regs   |regs   |regs   |regs   |regs   |
>       |       |       |       |       |       |
>       -----------------------------------------
> All the banks share some global control registers, and each bank have its
> special bank registers, like pgtable base register, tlb operation registers,
> the fault status registers.
>   
> In mt8195, we enable this bank feature for infra iommu, We put PCIe in bank0
> and USB in bank4. they have independent pgtable.
> 
> MT8186 is based on MT8195, it just has two patches.
> 
> Change note:
> v7: 1) Update the changes from Matthias. like add a new function for readability.
>      2) Add mt8186 into this patchset, It may be helpful for maintainer to apply.

For the whole series:

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> 
> v6: https://lore.kernel.org/linux-iommu/20220407075726.17771-1-yong.wu@mediatek.com/
>      Rebase on v5.18-rc1.
> 
> v5: https://lore.kernel.org/linux-iommu/20220217113453.13658-1-yong.wu@mediatek.com
>     1) Base on next-20220216
>     2) Remove a patch for kmalloc for protect buffer. keep the kzalloc for it.
>     3) minor fix from AngeloGioacchino, like rename the error label name
>     (data_unlock to err_unlock).
>     Note, keep the TODO for component compare_of[26/34].
> 
> v4: https://lore.kernel.org/linux-iommu/20220125085634.17972-1-yong.wu@mediatek.com/
>     1) Base on v5.16-rc1
>     2) Base on tlb logic 2 patchset, some patches in v3 has already gone
>     through that patchset.
>     3) Due to the unreadable union for v1/v2(comment in 26/33 of v3), I
>     separate mtk_iommu_data for v1 and v2 totally, then remove mtk_iommu.h.
>     please see patch[26/35][27/35].
>     4) add two mutex for the internal data. patch[6/35][7/35].
>     5) add a new flag PM_CLK_AO.
> 
> v3: https://lore.kernel.org/linux-mediatek/20210923115840.17813-1-yong.wu@mediatek.com/
>      1) base on v5.15-rc1
>      2) Adjust devlink with smi-common, not use the property(sub-sommon).
>      3) Adjust tlb_flush_all flow,
>         a) Fix tlb_flush_all only is supported in bank0.
>         b) add tlb-flush-all in the resume callback.
>         c) remove the pm status checking in tlb-flush-all.
>         The reason are showed in the commit message.
>      4) Allow IOMMU_DOMAIN_UNMANAGED since PCIe VFIO use that.
>      5) Fix a clk warning and a null abort when unbind the iommu driver.
> 
> v2: https://lore.kernel.org/linux-mediatek/20210813065324.29220-1-yong.wu@mediatek.com/
>      1) Base on v5.14-rc1.
>      2) Fix build fail for arm32.
>      3) Fix dt-binding issue from Rob.
>      4) Fix the bank issue when tlb flush. v1 always use bank->base.
>      5) adjust devlink with smi-common since the node may be smi-sub-common.
>      6) other changes: like reword some commit message(removing many
>         "This patch..."); seperate serveral patches.
> 
> v1: https://lore.kernel.org/linux-mediatek/20210630023504.18177-1-yong.wu@mediatek.com/
>      Base on v5.13-rc1
> 
> Yong Wu (36):
>    dt-bindings: mediatek: mt8195: Add binding for MM IOMMU
>    dt-bindings: mediatek: mt8195: Add binding for infra IOMMU
>    dt-bindings: mediatek: mt8186: Add binding for MM iommu
>    iommu/mediatek: Fix 2 HW sharing pgtable issue
>    iommu/mediatek: Add list_del in mtk_iommu_remove
>    iommu/mediatek: Remove clk_disable in mtk_iommu_remove
>    iommu/mediatek: Add mutex for m4u_group and m4u_dom in data
>    iommu/mediatek: Add mutex for data in the mtk_iommu_domain
>    iommu/mediatek: Adapt sharing and non-sharing pgtable case
>    iommu/mediatek: Add 12G~16G support for multi domains
>    iommu/mediatek: Add a flag DCM_DISABLE
>    iommu/mediatek: Add a flag STD_AXI_MODE
>    iommu/mediatek: Remove the granule in the tlb flush
>    iommu/mediatek: Always enable output PA over 32bits in isr
>    iommu/mediatek: Add SUB_COMMON_3BITS flag
>    iommu/mediatek: Add IOMMU_TYPE flag
>    iommu/mediatek: Contain MM IOMMU flow with the MM TYPE
>    iommu/mediatek: Adjust device link when it is sub-common
>    iommu/mediatek: Allow IOMMU_DOMAIN_UNMANAGED for PCIe VFIO
>    iommu/mediatek: Add a PM_CLK_AO flag for infra iommu
>    iommu/mediatek: Add infra iommu support
>    iommu/mediatek: Add PCIe support
>    iommu/mediatek: Add mt8195 support
>    iommu/mediatek: Only adjust code about register base
>    iommu/mediatek: Just move code position in hw_init
>    iommu/mediatek: Separate mtk_iommu_data for v1 and v2
>    iommu/mediatek: Remove mtk_iommu.h
>    iommu/mediatek-v1: Just rename mtk_iommu to mtk_iommu_v1
>    iommu/mediatek: Add mtk_iommu_bank_data structure
>    iommu/mediatek: Initialise bank HW for each a bank
>    iommu/mediatek: Change the domid to iova_region_id
>    iommu/mediatek: Get the proper bankid for multi banks
>    iommu/mediatek: Initialise/Remove for multi bank dev
>    iommu/mediatek: Backup/restore regsiters for multi banks
>    iommu/mediatek: mt8195: Enable multi banks for infra iommu
>    iommu/mediatek: Add mt8186 iommu support
> 
>   .../bindings/iommu/mediatek,iommu.yaml        |  24 +-
>   drivers/iommu/mtk_iommu.c                     | 974 +++++++++++++-----
>   drivers/iommu/mtk_iommu.h                     | 101 --
>   drivers/iommu/mtk_iommu_v1.c                  | 235 +++--
>   .../dt-bindings/memory/mt8186-memory-port.h   | 217 ++++
>   .../dt-bindings/memory/mt8195-memory-port.h   | 408 ++++++++
>   include/dt-bindings/memory/mtk-memory-port.h  |   2 +
>   7 files changed, 1485 insertions(+), 476 deletions(-)
>   delete mode 100644 drivers/iommu/mtk_iommu.h
>   create mode 100644 include/dt-bindings/memory/mt8186-memory-port.h
>   create mode 100644 include/dt-bindings/memory/mt8195-memory-port.h
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu