From: Vasant Hegde <vasant.hegde@amd.com>
To: Wei Wang <wei.w.wang@hotmail.com>,
alex@shazbot.org, jgg@nvidia.com, suravee.suthikulpanit@amd.com,
thomas.lendacky@amd.com, joro@8bytes.org
Cc: kevin.tian@intel.com, linux-kernel@vger.kernel.org,
iommu@lists.linux.dev
Subject: Re: [PATCH v2 1/2] iommu/amd: Add IOMMU_PROT_IE flag for memory encryption
Date: Mon, 10 Nov 2025 15:25:06 +0530 [thread overview]
Message-ID: <e6b877d7-91c9-4db7-9c4f-bcf4608e17df@amd.com> (raw)
In-Reply-To: <SI2PR01MB439351F0B7E54513710BBD3DDCC7A@SI2PR01MB4393.apcprd01.prod.exchangelabs.com>
Hi Wei,
On 11/3/2025 7:30 PM, Wei Wang wrote:
> Introduce the IOMMU_PROT_IE flag to allow callers of iommu_v1_map_pages()
> to explicitly request memory encryption for specific mappings.
>
> With SME enabled, the C-bit (encryption bit) in IOMMU page table entries
> is now set only when IOMMU_PROT_IE is specified. This provides
> fine-grained control over which IOVAs are encrypted through the IOMMU
> page tables.
>
> Current PCIe devices and switches do not interpret the C-bit, so applying
> it to MMIO mappings would break PCIe peer‑to‑peer communication. Update
> the implementation to restrict C-bit usage to non‑MMIO backed IOVAs.
Right. Quote from AMD Programmers Manual Vol2, "any pages corresponding to MMIO
addresses must be configured with the C-bit clear."
>
> Fixes: 2543a786aa25 ("iommu/amd: Allow the AMD IOMMU to work with memory encryption")
> Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
> Signed-off-by: Wei Wang <wei.w.wang@hotmail.com>
> ---> drivers/iommu/amd/amd_iommu_types.h | 3 ++-
> drivers/iommu/amd/io_pgtable.c | 7 +++++--
May be apply same fix for io_pgtable_v2.c as well? (Of course filename changed
with generic pt series).
-Vasant
> drivers/iommu/amd/iommu.c | 2 ++
> 3 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iommu/amd/amd_iommu_types.h b/drivers/iommu/amd/amd_iommu_types.h
> index a698a2e7ce2a..5b6ce0286a16 100644
> --- a/drivers/iommu/amd/amd_iommu_types.h
> +++ b/drivers/iommu/amd/amd_iommu_types.h
> @@ -442,9 +442,10 @@
> #define IOMMU_PTE_PAGE(pte) (iommu_phys_to_virt((pte) & IOMMU_PAGE_MASK))
> #define IOMMU_PTE_MODE(pte) (((pte) >> 9) & 0x07)
>
> -#define IOMMU_PROT_MASK 0x03
> +#define IOMMU_PROT_MASK (IOMMU_PROT_IR | IOMMU_PROT_IW | IOMMU_PROT_IE)
> #define IOMMU_PROT_IR 0x01
> #define IOMMU_PROT_IW 0x02
> +#define IOMMU_PROT_IE 0x04
>
> #define IOMMU_UNITY_MAP_FLAG_EXCL_RANGE (1 << 2)
>
> diff --git a/drivers/iommu/amd/io_pgtable.c b/drivers/iommu/amd/io_pgtable.c
> index 70c2f5b1631b..ae5032dd3b2f 100644
> --- a/drivers/iommu/amd/io_pgtable.c
> +++ b/drivers/iommu/amd/io_pgtable.c
> @@ -367,11 +367,14 @@ static int iommu_v1_map_pages(struct io_pgtable_ops *ops, unsigned long iova,
> if (!iommu_pages_list_empty(&freelist))
> updated = true;
>
> + if (prot & IOMMU_PROT_IE)
> + paddr = __sme_set(paddr);
> +
> if (count > 1) {
> - __pte = PAGE_SIZE_PTE(__sme_set(paddr), pgsize);
> + __pte = PAGE_SIZE_PTE(paddr, pgsize);
> __pte |= PM_LEVEL_ENC(7) | IOMMU_PTE_PR | IOMMU_PTE_FC;
> } else
> - __pte = __sme_set(paddr) | IOMMU_PTE_PR | IOMMU_PTE_FC;
> + __pte = paddr | IOMMU_PTE_PR | IOMMU_PTE_FC;
>
> if (prot & IOMMU_PROT_IR)
> __pte |= IOMMU_PTE_IR;
> diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c
> index 2e1865daa1ce..eaf024e9dff0 100644
> --- a/drivers/iommu/amd/iommu.c
> +++ b/drivers/iommu/amd/iommu.c
> @@ -2762,6 +2762,8 @@ static int amd_iommu_map_pages(struct iommu_domain *dom, unsigned long iova,
> prot |= IOMMU_PROT_IR;
> if (iommu_prot & IOMMU_WRITE)
> prot |= IOMMU_PROT_IW;
> + if (!(iommu_prot & IOMMU_MMIO))
> + prot |= IOMMU_PROT_IE;
>
> if (ops->map_pages) {
> ret = ops->map_pages(ops, iova, paddr, pgsize,
next prev parent reply other threads:[~2025-11-10 9:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-03 14:00 [PATCH v2 0/2] iommu/amd: Avoid setting C-bit for MMIO addresses Wei Wang
2025-11-03 14:00 ` [PATCH v2 1/2] iommu/amd: Add IOMMU_PROT_IE flag for memory encryption Wei Wang
2025-11-07 1:02 ` Jason Gunthorpe
2025-11-07 2:39 ` Wei Wang
2025-11-10 9:55 ` Vasant Hegde [this message]
2025-11-11 1:18 ` Wei Wang
2025-11-11 4:44 ` Vasant Hegde
2025-11-03 14:00 ` [PATCH v2 2/2] vfio/type1: Set IOMMU_MMIO in dma->prot for MMIO-backed addresses Wei Wang
2025-11-07 1:03 ` Jason Gunthorpe
2025-11-07 2:38 ` Wei Wang
2025-11-07 14:16 ` Jason Gunthorpe
[not found] ` <SI2PR01MB4393E04163E5AC9FD45D56EFDCC3A@SI2PR01MB4393.apcprd01.prod.exchangelabs.com>
2025-11-07 15:57 ` Jason Gunthorpe
2025-11-07 16:19 ` Wei Wang
2025-11-07 16:36 ` Jason Gunthorpe
2025-11-07 17:56 ` Tom Lendacky
2025-11-07 18:32 ` Jason Gunthorpe
2025-11-07 19:59 ` Tom Lendacky
2025-11-10 6:28 ` Wei Wang
2025-11-10 9:55 ` Vasant Hegde
2025-11-18 14:36 ` Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e6b877d7-91c9-4db7-9c4f-bcf4608e17df@amd.com \
--to=vasant.hegde@amd.com \
--cc=alex@shazbot.org \
--cc=iommu@lists.linux.dev \
--cc=jgg@nvidia.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=suravee.suthikulpanit@amd.com \
--cc=thomas.lendacky@amd.com \
--cc=wei.w.wang@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox