From: Sam Ravnborg <sam@ravnborg.org>
To: kbuild <linux-kbuild@vger.kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Subject: [PATCH] Add HAVE_OPROFILE
Date: Sat, 2 Feb 2008 21:46:42 +0100 [thread overview]
Message-ID: <1201985204-26589-8-git-send-email-sam@ravnborg.org> (raw)
In-Reply-To: <20080202203503.GA26415@uranus.ravnborg.org>
From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Linus:
On the per-architecture side, I do think it would be better to *not* have
internal architecture knowledge in a generic file, and as such a line like
depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32
really shouldn't exist in a file like kernel/Kconfig.instrumentation.
It would be much better to do
depends on ARCH_SUPPORTS_KPROBES
in that generic file, and then architectures that do support it would just
have a
bool ARCH_SUPPORTS_KPROBES
default y
in *their* architecture files. That would seem to be much more logical,
and is readable both for arch maintainers *and* for people who have no
clue - and don't care - about which architecture is supposed to support
which interface...
Changelog:
Actually, I know I gave this as the magic incantation, but now that I see
it, I realize that I should have told you to just use
config ARCH_SUPPORTS_KPROBES
def_bool y
instead, which is a bit denser.
We seem to use both kinds of syntax for these things, but this is really
what "def_bool" is there for...
Changelog :
- Moving to HAVE_*.
- Add AVR32 oprofile.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
arch/alpha/Kconfig | 1 +
arch/arm/Kconfig | 1 +
arch/avr32/Kconfig | 4 +---
arch/blackfin/Kconfig | 1 +
arch/ia64/Kconfig | 1 +
arch/m32r/Kconfig | 1 +
arch/mips/Kconfig | 1 +
arch/parisc/Kconfig | 1 +
arch/powerpc/Kconfig | 1 +
arch/ppc/Kconfig | 1 +
arch/s390/Kconfig | 1 +
arch/sh/Kconfig | 1 +
arch/sparc/Kconfig | 1 +
arch/sparc64/Kconfig | 1 +
arch/x86/Kconfig | 5 +----
kernel/Kconfig.instrumentation | 5 ++++-
16 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index c613d5f..0ff5572 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -5,6 +5,7 @@
config ALPHA
bool
default y
+ select HAVE_OPROFILE
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 623eaa1..3b3eb4e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -10,6 +10,7 @@ config ARM
default y
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
+ select HAVE_OPROFILE
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index e34e2c9..b46932c 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,6 +10,7 @@ config AVR32
# With EMBEDDED=n, we get lots of stuff automatically selected
# that we usually don't need on AVR32.
select EMBEDDED
+ select HAVE_OPROFILE
help
AVR32 is a high-performance 32-bit RISC microprocessor core,
designed for cost-sensitive embedded applications, with particular
@@ -54,9 +55,6 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
def_bool n
-config ARCH_SUPPORTS_OPROFILE
- def_bool y
-
config GENERIC_HWEIGHT
def_bool y
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 4802eb7..3ba89dc 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -24,6 +24,7 @@ config RWSEM_XCHGADD_ALGORITHM
config BLACKFIN
bool
default y
+ select HAVE_OPROFILE
config ZONE_DMA
bool
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index c9307c9..5e410f2 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -15,6 +15,7 @@ config IA64
select ACPI if (!IA64_HP_SIM)
select PM if (!IA64_HP_SIM)
select ARCH_SUPPORTS_MSI
+ select HAVE_OPROFILE
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 49326e9..b93897d 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux/M32R Kernel Configuration"
config M32R
bool
default y
+ select HAVE_OPROFILE
config SBUS
bool
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 36a4018..eb8be54 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1,6 +1,7 @@
config MIPS
bool
default y
+ select HAVE_OPROFILE
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
select RTC_LIB
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 2b649c4..e1a2f77 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -7,6 +7,7 @@ mainmenu "Linux/PA-RISC Kernel Configuration"
config PARISC
def_bool y
+ select HAVE_OPROFILE
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4a22c99..c3c29e7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -87,6 +87,7 @@ config ARCH_NO_VIRT_TO_BUS
config PPC
bool
default y
+ select HAVE_OPROFILE
config EARLY_PRINTK
bool
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index db5934c..ea9eb48 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -42,6 +42,7 @@ config GENERIC_CALIBRATE_DELAY
config PPC
bool
default y
+ select HAVE_OPROFILE
config PPC32
bool
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 6ef54d2..c561f6f 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -51,6 +51,7 @@ mainmenu "Linux Kernel Configuration"
config S390
def_bool y
+ select HAVE_OPROFILE
source "init/Kconfig"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b30c4c3..f868691 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux/SuperH Kernel Configuration"
config SUPERH
def_bool y
select EMBEDDED
+ select HAVE_OPROFILE
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 527adc8..3d9bc2f 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -63,6 +63,7 @@ config NR_CPUS
config SPARC
bool
default y
+ select HAVE_OPROFILE
# Identify this as a Sparc32 build
config SPARC32
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 158522f..ca14d88 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux/UltraSPARC Kernel Configuration"
config SPARC
bool
default y
+ select HAVE_OPROFILE
config SPARC64
bool
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7109037..6559488 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -18,6 +18,7 @@ config X86_64
### Arch settings
config X86
def_bool y
+ select HAVE_OPROFILE
config GENERIC_LOCKBREAK
def_bool n
@@ -106,10 +107,6 @@ config GENERIC_TIME_VSYSCALL
config HAVE_SETUP_PER_CPU_AREA
def_bool X86_64
-config ARCH_SUPPORTS_OPROFILE
- bool
- default y
-
select HAVE_KVM
config ARCH_HIBERNATION_POSSIBLE
diff --git a/kernel/Kconfig.instrumentation b/kernel/Kconfig.instrumentation
index a00dcb6..d9d010a 100644
--- a/kernel/Kconfig.instrumentation
+++ b/kernel/Kconfig.instrumentation
@@ -21,7 +21,7 @@ config PROFILING
config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
depends on PROFILING && !UML
- depends on ARCH_SUPPORTS_OPROFILE || ALPHA || ARM || BLACKFIN || IA64 || M32R || PARISC || PPC || S390 || SUPERH || SPARC
+ depends on HAVE_OPROFILE
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
@@ -29,6 +29,9 @@ config OPROFILE
If unsure, say N.
+config HAVE_OPROFILE
+ def_bool n
+
config KPROBES
bool "Kprobes"
depends on KALLSYMS && MODULES && !UML
--
1.5.4.rc3.14.g44397
next prev parent reply other threads:[~2008-02-02 20:46 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-02 20:35 [REVIEW for merge] kbuild updates including silence of section mismatch check Sam Ravnborg
2008-02-02 20:46 ` [PATCH] Remove __INIT_REFOK and __INITDATA_REFOK Sam Ravnborg
2008-02-02 20:46 ` [PATCH] kbuild: Spelling/grammar fixes for config DEBUG_SECTION_MISMATCH Sam Ravnborg
2008-02-02 20:46 ` [PATCH] kbuild: add svn revision information to setlocalversion Sam Ravnborg
2008-02-02 20:46 ` [PATCH] kconfig: mark config as changed when loading an alternate config Sam Ravnborg
2008-02-02 20:46 ` [PATCH] kconfig: ignore select of unknown symbol Sam Ravnborg
2008-02-02 20:46 ` [PATCH] Fix ARM to play nicely with generic Instrumentation menu Sam Ravnborg
2008-02-02 20:46 ` [PATCH] Create arch/Kconfig Sam Ravnborg
2008-02-02 20:46 ` Sam Ravnborg [this message]
2008-02-02 20:46 ` [PATCH] Add HAVE_KPROBES Sam Ravnborg
2008-02-02 20:46 ` [PATCH] Move Kconfig.instrumentation to arch/Kconfig and init/Kconfig Sam Ravnborg
2008-02-02 21:25 ` [REVIEW for merge] kbuild updates including silence of section mismatch check Frans Pop
2008-02-02 21:30 ` Sam Ravnborg
2008-02-03 3:30 ` Bryan Wu
2008-02-03 6:13 ` [PATCH try#2 ] kbuild: add svn revision information to setlocalversion Bryan Wu
2008-02-03 10:04 ` Sam Ravnborg
2008-02-02 22:37 ` [Additional PATCH] kbuild: do not warn about __*init/__*exit symbols being exported Sam Ravnborg
2008-02-05 10:38 ` [REVIEW for merge] kbuild updates including silence of section mismatch check Geert Uytterhoeven
2008-02-06 20:58 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1201985204-26589-8-git-send-email-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=mathieu.desnoyers@polymtl.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox