From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Richard Weinberger <richard@nod.at>,
Joe Perches <joe@perches.com>,
user-mode-linux-devel@lists.sourceforge.net,
linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH/RFC] um: Preinclude include/linux/kern_levels.h
Date: Thu, 16 Aug 2012 20:15:05 +0200 [thread overview]
Message-ID: <1345140905-10209-1-git-send-email-geert@linux-m68k.org> (raw)
The userspace part of UML uses the asm-offsets.h generator mechanism to
create definitions for UM_KERN_<LEVEL> that match the in-kernel
KERN_<LEVEL> constant definitions.
As of commit 04d2c8c83d0e3ac5f78aeede51babb3236200112 ("printk: convert
the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no
longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e.
it contains two parts.
However, the combo of DEFINE_STR() in
arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't
support string literals consisting of multiple parts. Hence for all
UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual
definition, while the remainder ends up in the comment. E.g. in
include/generated/asm-offsets.h we get
#define UM_KERN_INFO "\001" /* "6" KERN_INFO */
instead of
#define UM_KERN_INFO "\001" "6" /* KERN_INFO */
This causes spurious '^A' output in some kernel messages:
Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
^AChecking that host ptys support output SIGIO...Yes
^AChecking that host ptys support SIGIO on close...No, enabling workaround
^AUsing 2.6 host AIO
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource itimer
To fix this:
- Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from
arch/um/include/shared/common-offsets.h to
arch/um/include/shared/user.h, which is preincluded for all userspace
parts,
- Preinclude include/linux/kern_levels.h for all userspace parts, to
obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't
violate the kernel/userspace separation, as include/linux/kern_levels.h
is self-contained and doesn't expose any other kernel internals.
- Remove the now unused STR() and DEFINE_STR() macros.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
We may convert all UM_KERN_* users to KERN_* and drop the extra defines?
---
arch/um/include/shared/common-offsets.h | 10 ----------
arch/um/include/shared/user.h | 11 +++++++++++
arch/um/scripts/Makefile.rules | 2 +-
arch/x86/um/shared/sysdep/kernel-offsets.h | 3 ---
4 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/arch/um/include/shared/common-offsets.h b/arch/um/include/shared/common-offsets.h
index 40db8f7..2df313b 100644
--- a/arch/um/include/shared/common-offsets.h
+++ b/arch/um/include/shared/common-offsets.h
@@ -7,16 +7,6 @@ DEFINE(UM_KERN_PAGE_MASK, PAGE_MASK);
DEFINE(UM_KERN_PAGE_SHIFT, PAGE_SHIFT);
DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC);
-DEFINE_STR(UM_KERN_EMERG, KERN_EMERG);
-DEFINE_STR(UM_KERN_ALERT, KERN_ALERT);
-DEFINE_STR(UM_KERN_CRIT, KERN_CRIT);
-DEFINE_STR(UM_KERN_ERR, KERN_ERR);
-DEFINE_STR(UM_KERN_WARNING, KERN_WARNING);
-DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE);
-DEFINE_STR(UM_KERN_INFO, KERN_INFO);
-DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG);
-DEFINE_STR(UM_KERN_CONT, KERN_CONT);
-
DEFINE(UM_ELF_CLASS, ELF_CLASS);
DEFINE(UM_ELFCLASS32, ELFCLASS32);
DEFINE(UM_ELFCLASS64, ELFCLASS64);
diff --git a/arch/um/include/shared/user.h b/arch/um/include/shared/user.h
index 4fa82c0..cef0685 100644
--- a/arch/um/include/shared/user.h
+++ b/arch/um/include/shared/user.h
@@ -26,6 +26,17 @@
extern void panic(const char *fmt, ...)
__attribute__ ((format (printf, 1, 2)));
+/* Requires preincluding include/linux/kern_levels.h */
+#define UM_KERN_EMERG KERN_EMERG
+#define UM_KERN_ALERT KERN_ALERT
+#define UM_KERN_CRIT KERN_CRIT
+#define UM_KERN_ERR KERN_ERR
+#define UM_KERN_WARNING KERN_WARNING
+#define UM_KERN_NOTICE KERN_NOTICE
+#define UM_KERN_INFO KERN_INFO
+#define UM_KERN_DEBUG KERN_DEBUG
+#define UM_KERN_CONT KERN_CONT
+
#ifdef UML_CONFIG_PRINTK
extern int printk(const char *fmt, ...)
__attribute__ ((format (printf, 1, 2)));
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index d50270d..15889df 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -8,7 +8,7 @@ USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m) $(USER_SINGLE_OBJS))
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
$(USER_OBJS:.o=.%): \
- c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include user.h $(CFLAGS_$(basetarget).o)
+ c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include $(srctree)/include/linux/kern_levels.h -include user.h $(CFLAGS_$(basetarget).o)
# These are like USER_OBJS but filter USER_CFLAGS through unprofile instead of
# using it directly.
diff --git a/arch/x86/um/shared/sysdep/kernel-offsets.h b/arch/x86/um/shared/sysdep/kernel-offsets.h
index 5868526..46a9df9 100644
--- a/arch/x86/um/shared/sysdep/kernel-offsets.h
+++ b/arch/x86/um/shared/sysdep/kernel-offsets.h
@@ -7,9 +7,6 @@
#define DEFINE(sym, val) \
asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-#define STR(x) #x
-#define DEFINE_STR(sym, val) asm volatile("\n->" #sym " " STR(val) " " #val: : )
-
#define BLANK() asm volatile("\n->" : : )
#define OFFSET(sym, str, mem) \
--
1.7.0.4
next reply other threads:[~2012-08-16 18:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-16 18:15 Geert Uytterhoeven [this message]
2012-09-09 8:33 ` [PATCH/RFC] um: Preinclude include/linux/kern_levels.h Geert Uytterhoeven
2012-09-09 15:09 ` Joe Perches
2012-09-09 16:06 ` [uml-devel] " Richard Weinberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345140905-10209-1-git-send-email-geert@linux-m68k.org \
--to=geert@linux-m68k.org \
--cc=joe@perches.com \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=richard@nod.at \
--cc=user-mode-linux-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox