Re: [PATCH] kconfig: use bool instead of boolean for type definition attributes

Christoph Jaeger
2015-01-05T19:52:55Z

(adding Michal Marek)

On Sat, Dec 20, 2014 at 03:41:11PM -0500, Christoph Jaeger wrote:
> Support for keyword 'boolean' will be dropped later on.
>
> No functional change.
>
> Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
> Signed-off-by: Christoph Jaeger <cj@linux.com>
> ---
> arch/mips/pmcs-msp71xx/Kconfig | 6 +++---
> drivers/connector/Kconfig | 2 +-
> drivers/hwmon/Kconfig | 2 +-
> drivers/hwmon/pmbus/Kconfig | 2 +-
> drivers/i2c/Kconfig | 4 ++--
> drivers/iio/Kconfig | 4 ++--
> drivers/isdn/hardware/mISDN/Kconfig | 2 +-
> drivers/md/Kconfig | 4 ++--
> drivers/md/persistent-data/Kconfig | 2 +-
> drivers/net/ethernet/ti/Kconfig | 4 ++--
> drivers/net/usb/Kconfig | 12 ++++++------
> drivers/net/wireless/rt2x00/Kconfig | 6 +++---
> drivers/pci/pcie/aer/Kconfig | 2 +-
> drivers/rtc/Kconfig | 8 ++++----
> drivers/spi/Kconfig | 6 +++---
> drivers/staging/board/Kconfig | 2 +-
> drivers/staging/emxx_udc/Kconfig | 2 +-
> drivers/staging/iio/Kconfig | 4 ++--
> drivers/tty/serial/Kconfig | 2 +-
> drivers/usb/gadget/Kconfig | 34 +++++++++++++++++-----------------
> drivers/usb/gadget/legacy/Kconfig | 2 +-
> drivers/usb/gadget/udc/Kconfig | 4 ++--
> drivers/usb/phy/Kconfig | 2 +-
> init/Kconfig | 4 ++--
> lib/Kconfig | 30 +++++++++++++++---------------
> mm/Kconfig | 22 +++++++++++-----------
> net/Kconfig | 14 +++++++-------
> net/sched/Kconfig | 2 +-
> net/switchdev/Kconfig | 2 +-
> security/integrity/Kconfig | 4 ++--
> security/integrity/evm/Kconfig | 2 +-
> 31 files changed, 99 insertions(+), 99 deletions(-)
>
> diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
> index 6073ca4..4190093 100644
> --- a/arch/mips/pmcs-msp71xx/Kconfig
> +++ b/arch/mips/pmcs-msp71xx/Kconfig
> @@ -36,14 +36,14 @@ config PMC_MSP7120_FPGA
> endchoice
>
> config MSP_HAS_USB
> - boolean
> + bool
> depends on PMC_MSP
>
> config MSP_ETH
> - boolean
> + bool
> select MSP_HAS_MAC
> depends on PMC_MSP
>
> config MSP_HAS_MAC
> - boolean
> + bool
> depends on PMC_MSP
> diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig
> index 6e6730f..3de5f3a 100644
> --- a/drivers/connector/Kconfig
> +++ b/drivers/connector/Kconfig
> @@ -12,7 +12,7 @@ menuconfig CONNECTOR
> if CONNECTOR
>
> config PROC_EVENTS
> - boolean "Report process events to userspace"
> + bool "Report process events to userspace"
> depends on CONNECTOR=y
> default y
> ---help---
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 6529c09..33149a4 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1595,7 +1595,7 @@ config SENSORS_W83795
> will be called w83795.
>
> config SENSORS_W83795_FANCTRL
> - boolean "Include automatic fan control support (DANGEROUS)"
> + bool "Include automatic fan control support (DANGEROUS)"
> depends on SENSORS_W83795
> default n
> help
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index a674cd8..9f7dbd1 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -57,7 +57,7 @@ config SENSORS_LTC2978
> be called ltc2978.
>
> config SENSORS_LTC2978_REGULATOR
> - boolean "Regulator support for LTC2978 and compatibles"
> + bool "Regulator support for LTC2978 and compatibles"
> depends on SENSORS_LTC2978 && REGULATOR
> help
> If you say yes here you get regulator support for Linear
> diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
> index 8c9e619..78fbee4 100644
> --- a/drivers/i2c/Kconfig
> +++ b/drivers/i2c/Kconfig
> @@ -35,11 +35,11 @@ config ACPI_I2C_OPREGION
> if I2C
>
> config I2C_BOARDINFO
> - boolean
> + bool
> default y
>
> config I2C_COMPAT
> - boolean "Enable compatibility bits for old user-space"
> + bool "Enable compatibility bits for old user-space"
> default y
> help
> Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index 345395e..397c8df 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -21,7 +21,7 @@ config IIO_BUFFER
> if IIO_BUFFER
>
> config IIO_BUFFER_CB
> -boolean "IIO callback buffer used for push in-kernel interfaces"
> + bool "IIO callback buffer used for push in-kernel interfaces"
> help
> Should be selected by any drivers that do in-kernel push
> usage. That is, those where the data is pushed to the consumer.
> @@ -44,7 +44,7 @@ config IIO_TRIGGERED_BUFFER
> endif # IIO_BUFFER
>
> config IIO_TRIGGER
> - boolean "Enable triggered sampling support"
> + bool "Enable triggered sampling support"
> help
> Provides IIO core support for triggers. Currently these
> are used to initialize capture of samples to push into
> diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
> index b8611e3..09df54f 100644
> --- a/drivers/isdn/hardware/mISDN/Kconfig
> +++ b/drivers/isdn/hardware/mISDN/Kconfig
> @@ -24,7 +24,7 @@ config MISDN_HFCMULTI
> * HFC-E1 (E1 interface for 2Mbit ISDN)
>
> config MISDN_HFCMULTI_8xx
> - boolean "Support for XHFC embedded board in HFC multiport driver"
> + bool "Support for XHFC embedded board in HFC multiport driver"
> depends on MISDN
> depends on MISDN_HFCMULTI
> depends on 8xx
> diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
> index 5bdedf6..1cd9cf8 100644
> --- a/drivers/md/Kconfig
> +++ b/drivers/md/Kconfig
> @@ -177,7 +177,7 @@ config MD_FAULTY
> source "drivers/md/bcache/Kconfig"
>
> config BLK_DEV_DM_BUILTIN
> - boolean
> + bool
>
> config BLK_DEV_DM
> tristate "Device mapper support"
> @@ -196,7 +196,7 @@ config BLK_DEV_DM
> If unsure, say N.
>
> config DM_DEBUG
> - boolean "Device mapper debugging support"
> + bool "Device mapper debugging support"
> depends on BLK_DEV_DM
> ---help---
> Enable this for messages that may help debug device-mapper problems.
> diff --git a/drivers/md/persistent-data/Kconfig b/drivers/md/persistent-data/Kconfig
> index 0c2dec7..78c74bb 100644
> --- a/drivers/md/persistent-data/Kconfig
> +++ b/drivers/md/persistent-data/Kconfig
> @@ -8,7 +8,7 @@ config DM_PERSISTENT_DATA
> device-mapper targets such as the thin provisioning target.
>
> config DM_DEBUG_BLOCK_STACK_TRACING
> - boolean "Keep stack trace of persistent data block lock holders"
> + bool "Keep stack trace of persistent data block lock holders"
> depends on STACKTRACE_SUPPORT && DM_PERSISTENT_DATA
> select STACKTRACE
> ---help---
> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index 605dd90..ca37fb2 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -50,7 +50,7 @@ config TI_DAVINCI_CPDMA
> will be called davinci_cpdma. This is recommended.
>
> config TI_CPSW_PHY_SEL
> - boolean "TI CPSW Switch Phy sel Support"
> + bool "TI CPSW Switch Phy sel Support"
> depends on TI_CPSW
> ---help---
> This driver supports configuring of the phy mode connected to
> @@ -71,7 +71,7 @@ config TI_CPSW
> will be called cpsw.
>
> config TI_CPTS
> - boolean "TI Common Platform Time Sync (CPTS) Support"
> + bool "TI Common Platform Time Sync (CPTS) Support"
> depends on TI_CPSW
> select PTP_1588_CLOCK
> ---help---
> diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
> index 37eed4d..3bd9678 100644
> --- a/drivers/net/usb/Kconfig
> +++ b/drivers/net/usb/Kconfig
> @@ -397,14 +397,14 @@ config USB_NET_CDC_SUBSET
> not generally have permanently assigned Ethernet addresses.
>
> config USB_ALI_M5632
> - boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
> + bool "ALi M5632 based 'USB 2.0 Data Link' cables"
> depends on USB_NET_CDC_SUBSET
> help
> Choose this option if you're using a host-to-host cable
> based on this design, which supports USB 2.0 high speed.
>
> config USB_AN2720
> - boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
> + bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
> depends on USB_NET_CDC_SUBSET
> help
> Choose this option if you're using a host-to-host cable
> @@ -412,7 +412,7 @@ config USB_AN2720
> Cypress brand.
>
> config USB_BELKIN
> - boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
> + bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
> depends on USB_NET_CDC_SUBSET
> default y
> help
> @@ -421,7 +421,7 @@ config USB_BELKIN
> microcontroller, with LEDs that indicate traffic.
>
> config USB_ARMLINUX
> - boolean "Embedded ARM Linux links (iPaq, ...)"
> + bool "Embedded ARM Linux links (iPaq, ...)"
> depends on USB_NET_CDC_SUBSET
> default y
> help
> @@ -438,14 +438,14 @@ config USB_ARMLINUX
> this simpler protocol by installing a different kernel.
>
> config USB_EPSON2888
> - boolean "Epson 2888 based firmware (DEVELOPMENT)"
> + bool "Epson 2888 based firmware (DEVELOPMENT)"
> depends on USB_NET_CDC_SUBSET
> help
> Choose this option to support the usb networking links used
> by some sample firmware from Epson.
>
> config USB_KC2190
> - boolean "KT Technology KC2190 based cables (InstaNet)"
> + bool "KT Technology KC2190 based cables (InstaNet)"
> depends on USB_NET_CDC_SUBSET
> help
> Choose this option if you're using a host-to-host cable
> diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
> index 006b8bc..2b4ef25 100644
> --- a/drivers/net/wireless/rt2x00/Kconfig
> +++ b/drivers/net/wireless/rt2x00/Kconfig
> @@ -243,14 +243,14 @@ config RT2X00_LIB
> select AVERAGE
>
> config RT2X00_LIB_FIRMWARE
> - boolean
> + bool
> select FW_LOADER
>
> config RT2X00_LIB_CRYPTO
> - boolean
> + bool
>
> config RT2X00_LIB_LEDS
> - boolean
> + bool
> default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
>
> config RT2X00_LIB_DEBUGFS
> diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
> index 3894402..7d1437b 100644
> --- a/drivers/pci/pcie/aer/Kconfig
> +++ b/drivers/pci/pcie/aer/Kconfig
> @@ -3,7 +3,7 @@
> #
>
> config PCIEAER
> - boolean "Root Port Advanced Error Reporting support"
> + bool "Root Port Advanced Error Reporting support"
> depends on PCIEPORTBUS
> select RAS
> default y
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index f15cddf..1de1ea5 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -65,7 +65,7 @@ config RTC_DEBUG
> comment "RTC interfaces"
>
> config RTC_INTF_SYSFS
> - boolean "/sys/class/rtc/rtcN (sysfs)"
> + bool "/sys/class/rtc/rtcN (sysfs)"
> depends on SYSFS
> default RTC_CLASS
> help
> @@ -75,7 +75,7 @@ config RTC_INTF_SYSFS
> If unsure, say Y.
>
> config RTC_INTF_PROC
> - boolean "/proc/driver/rtc (procfs for rtcN)"
> + bool "/proc/driver/rtc (procfs for rtcN)"
> depends on PROC_FS
> default RTC_CLASS
> help
> @@ -88,7 +88,7 @@ config RTC_INTF_PROC
> If unsure, say Y.
>
> config RTC_INTF_DEV
> - boolean "/dev/rtcN (character devices)"
> + bool "/dev/rtcN (character devices)"
> default RTC_CLASS
> help
> Say yes here if you want to use your RTCs using the /dev
> @@ -455,7 +455,7 @@ config RTC_DRV_DM355EVM
> Supports the RTC firmware in the MSP430 on the DM355 EVM.
>
> config RTC_DRV_TWL92330
> - boolean "TI TWL92330/Menelaus"
> + bool "TI TWL92330/Menelaus"
> depends on MENELAUS
> help
> If you say yes here you get support for the RTC on the
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 9982998..ef302c7 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -29,7 +29,7 @@ menuconfig SPI
> if SPI
>
> config SPI_DEBUG
> - boolean "Debug support for SPI drivers"
> + bool "Debug support for SPI drivers"
> depends on DEBUG_KERNEL
> help
> Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
> @@ -40,8 +40,8 @@ config SPI_DEBUG
> #
>
> config SPI_MASTER
> -# boolean "SPI Master Support"
> - boolean
> +# bool "SPI Master Support"
> + bool
> default SPI
> help
> If your system has an master-capable SPI controller (which
> diff --git a/drivers/staging/board/Kconfig b/drivers/staging/board/Kconfig
> index 7eda0b8..0a89ad1 100644
> --- a/drivers/staging/board/Kconfig
> +++ b/drivers/staging/board/Kconfig
> @@ -1,5 +1,5 @@
> config STAGING_BOARD
> - boolean "Staging Board Support"
> + bool "Staging Board Support"
> depends on OF_ADDRESS
> depends on BROKEN
> help
> diff --git a/drivers/staging/emxx_udc/Kconfig b/drivers/staging/emxx_udc/Kconfig
> index 9bc6d3d..cc34020 100644
> --- a/drivers/staging/emxx_udc/Kconfig
> +++ b/drivers/staging/emxx_udc/Kconfig
> @@ -1,5 +1,5 @@
> config USB_EMXX
> - boolean "EMXX USB Function Device Controller"
> + bool "EMXX USB Function Device Controller"
> depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST))
> help
> The Emma Mobile series of SoCs from Renesas Electronics and
> diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
> index fa38be0..2418302 100644
> --- a/drivers/staging/iio/Kconfig
> +++ b/drivers/staging/iio/Kconfig
> @@ -30,13 +30,13 @@ config IIO_SIMPLE_DUMMY
> if IIO_SIMPLE_DUMMY
>
> config IIO_SIMPLE_DUMMY_EVENTS
> - boolean "Event generation support"
> + bool "Event generation support"
> select IIO_DUMMY_EVGEN
> help
> Add some dummy events to the simple dummy driver.
>
> config IIO_SIMPLE_DUMMY_BUFFER
> - boolean "Buffered capture support"
> + bool "Buffered capture support"
> select IIO_BUFFER
> select IIO_KFIFO_BUF
> help
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index c79b43c..9f439fa 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -498,7 +498,7 @@ config SERIAL_MFD_HSU
> select SERIAL_CORE
>
> config SERIAL_MFD_HSU_CONSOLE
> - boolean "Medfile HSU serial console support"
> + bool "Medfile HSU serial console support"
> depends on SERIAL_MFD_HSU=y
> select SERIAL_CORE_CONSOLE
>
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index 747ef53..c523f94 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -45,7 +45,7 @@ menuconfig USB_GADGET
> if USB_GADGET
>
> config USB_GADGET_DEBUG
> - boolean "Debugging messages (DEVELOPMENT)"
> + bool "Debugging messages (DEVELOPMENT)"
> depends on DEBUG_KERNEL
> help
> Many controller and gadget drivers will print some debugging
> @@ -73,7 +73,7 @@ config USB_GADGET_VERBOSE
> production build.
>
> config USB_GADGET_DEBUG_FILES
> - boolean "Debugging information files (DEVELOPMENT)"
> + bool "Debugging information files (DEVELOPMENT)"
> depends on PROC_FS
> help
> Some of the drivers in the "gadget" framework can expose
> @@ -84,7 +84,7 @@ config USB_GADGET_DEBUG_FILES
> here. If in doubt, or to conserve kernel memory, say "N".
>
> config USB_GADGET_DEBUG_FS
> - boolean "Debugging information files in debugfs (DEVELOPMENT)"
> + bool "Debugging information files in debugfs (DEVELOPMENT)"
> depends on DEBUG_FS
> help
> Some of the drivers in the "gadget" framework can expose
> @@ -230,7 +230,7 @@ config USB_CONFIGFS
> For more information see Documentation/usb/gadget_configfs.txt.
>
> config USB_CONFIGFS_SERIAL
> - boolean "Generic serial bulk in/out"
> + bool "Generic serial bulk in/out"
> depends on USB_CONFIGFS
> depends on TTY
> select USB_U_SERIAL
> @@ -239,7 +239,7 @@ config USB_CONFIGFS_SERIAL
> The function talks to the Linux-USB generic serial driver.
>
> config USB_CONFIGFS_ACM
> - boolean "Abstract Control Model (CDC ACM)"
> + bool "Abstract Control Model (CDC ACM)"
> depends on USB_CONFIGFS
> depends on TTY
> select USB_U_SERIAL
> @@ -249,7 +249,7 @@ config USB_CONFIGFS_ACM
> MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
>
> config USB_CONFIGFS_OBEX
> - boolean "Object Exchange Model (CDC OBEX)"
> + bool "Object Exchange Model (CDC OBEX)"
> depends on USB_CONFIGFS
> depends on TTY
> select USB_U_SERIAL
> @@ -259,7 +259,7 @@ config USB_CONFIGFS_OBEX
> since the kernel itself doesn't implement the OBEX protocol.
>
> config USB_CONFIGFS_NCM
> - boolean "Network Control Model (CDC NCM)"
> + bool "Network Control Model (CDC NCM)"
> depends on USB_CONFIGFS
> depends on NET
> select USB_U_ETHER
> @@ -270,7 +270,7 @@ config USB_CONFIGFS_NCM
> different alignment possibilities.
>
> config USB_CONFIGFS_ECM
> - boolean "Ethernet Control Model (CDC ECM)"
> + bool "Ethernet Control Model (CDC ECM)"
> depends on USB_CONFIGFS
> depends on NET
> select USB_U_ETHER
> @@ -282,7 +282,7 @@ config USB_CONFIGFS_ECM
> supported by firmware for smart network devices.
>
> config USB_CONFIGFS_ECM_SUBSET
> - boolean "Ethernet Control Model (CDC ECM) subset"
> + bool "Ethernet Control Model (CDC ECM) subset"
> depends on USB_CONFIGFS
> depends on NET
> select USB_U_ETHER
> @@ -323,7 +323,7 @@ config USB_CONFIGFS_EEM
> the host is the same (a usbX device), so the differences are minimal.
>
> config USB_CONFIGFS_PHONET
> - boolean "Phonet protocol"
> + bool "Phonet protocol"
> depends on USB_CONFIGFS
> depends on NET
> depends on PHONET
> @@ -333,7 +333,7 @@ config USB_CONFIGFS_PHONET
> The Phonet protocol implementation for USB device.
>
> config USB_CONFIGFS_MASS_STORAGE
> - boolean "Mass storage"
> + bool "Mass storage"
> depends on USB_CONFIGFS
> depends on BLOCK
> select USB_F_MASS_STORAGE
> @@ -344,7 +344,7 @@ config USB_CONFIGFS_MASS_STORAGE
> specified as a module parameter or sysfs option.
>
> config USB_CONFIGFS_F_LB_SS
> - boolean "Loopback and sourcesink function (for testing)"
> + bool "Loopback and sourcesink function (for testing)"
> depends on USB_CONFIGFS
> select USB_F_SS_LB
> help
> @@ -357,7 +357,7 @@ config USB_CONFIGFS_F_LB_SS
> and its driver through a basic set of functional tests.
>
> config USB_CONFIGFS_F_FS
> - boolean "Function filesystem (FunctionFS)"
> + bool "Function filesystem (FunctionFS)"
> depends on USB_CONFIGFS
> select USB_F_FS
> help
> @@ -369,7 +369,7 @@ config USB_CONFIGFS_F_FS
> mass storage) and other are implemented in user space.
>
> config USB_CONFIGFS_F_UAC1
> - boolean "Audio Class 1.0"
> + bool "Audio Class 1.0"
> depends on USB_CONFIGFS
> depends on SND
> select USB_LIBCOMPOSITE
> @@ -382,7 +382,7 @@ config USB_CONFIGFS_F_UAC1
> on the device.
>
> config USB_CONFIGFS_F_UAC2
> - boolean "Audio Class 2.0"
> + bool "Audio Class 2.0"
> depends on USB_CONFIGFS
> depends on SND
> select USB_LIBCOMPOSITE
> @@ -400,7 +400,7 @@ config USB_CONFIGFS_F_UAC2
> wants as audio data to the USB Host.
>
> config USB_CONFIGFS_F_MIDI
> - boolean "MIDI function"
> + bool "MIDI function"
> depends on USB_CONFIGFS
> depends on SND
> select USB_LIBCOMPOSITE
> @@ -414,7 +414,7 @@ config USB_CONFIGFS_F_MIDI
> ALSA's aconnect utility etc.
>
> config USB_CONFIGFS_F_HID
> - boolean "HID function"
> + bool "HID function"
> depends on USB_CONFIGFS
> select USB_F_HID
> help
> diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
> index fd48ef3a..113c87e 100644
> --- a/drivers/usb/gadget/legacy/Kconfig
> +++ b/drivers/usb/gadget/legacy/Kconfig
> @@ -40,7 +40,7 @@ config USB_ZERO
> dynamically linked module called "g_zero".
>
> config USB_ZERO_HNPTEST
> - boolean "HNP Test Device"
> + bool "HNP Test Device"
> depends on USB_ZERO && USB_OTG
> help
> You can configure this device to enumerate using the device
> diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
> index b8e213e..674adfe 100644
> --- a/drivers/usb/gadget/udc/Kconfig
> +++ b/drivers/usb/gadget/udc/Kconfig
> @@ -198,7 +198,7 @@ config USB_S3C2410
> S3C2440 processors.
>
> config USB_S3C2410_DEBUG
> - boolean "S3C2410 udc debug messages"
> + bool "S3C2410 udc debug messages"
> depends on USB_S3C2410
>
> config USB_S3C_HSUDC
> @@ -287,7 +287,7 @@ config USB_NET2272
> gadget drivers to also be dynamically linked.
>
> config USB_NET2272_DMA
> - boolean "Support external DMA controller"
> + bool "Support external DMA controller"
> depends on USB_NET2272 && HAS_DMA
> help
> The NET2272 part can optionally support an external DMA
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index c6d0c8e..52d3d58 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -119,7 +119,7 @@ config TAHVO_USB
>
> config TAHVO_USB_HOST_BY_DEFAULT
> depends on TAHVO_USB
> - boolean "Device in USB host mode by default"
> + bool "Device in USB host mode by default"
> help
> Say Y here, if you want the device to enter USB host mode
> by default on bootup.
> diff --git a/init/Kconfig b/init/Kconfig
> index 9afb971..643b221 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -914,7 +914,7 @@ config NUMA_BALANCING_DEFAULT_ENABLED
> machine.
>
> menuconfig CGROUPS
> - boolean "Control Group support"
> + bool "Control Group support"
> select KERNFS
> help
> This option adds support for grouping sets of processes together, for
> @@ -1770,7 +1770,7 @@ config SLABINFO
> default y
>
> config RT_MUTEXES
> - boolean
> + bool
>
> config BASE_SMALL
> int
> diff --git a/lib/Kconfig b/lib/Kconfig
> index 54cf309..75da4d3 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -14,7 +14,7 @@ config BITREVERSE
> tristate
>
> config RATIONAL
> - boolean
> + bool
>
> config GENERIC_STRNCPY_FROM_USER
> bool
> @@ -39,14 +39,14 @@ config GENERIC_IOMAP
> select GENERIC_PCI_IOMAP
>
> config GENERIC_IO
> - boolean
> + bool
> default n
>
> config STMP_DEVICE
> bool
>
> config PERCPU_RWSEM
> - boolean
> + bool
>
> config ARCH_USE_CMPXCHG_LOCKREF
> bool
> @@ -257,7 +257,7 @@ config DECOMPRESS_LZ4
> # Generic allocator support is selected if needed
> #
> config GENERIC_ALLOCATOR
> - boolean
> + bool
>
> #
> # reed solomon support is select'ed if needed
> @@ -266,16 +266,16 @@ config REED_SOLOMON
> tristate
>
> config REED_SOLOMON_ENC8
> - boolean
> + bool
>
> config REED_SOLOMON_DEC8
> - boolean
> + bool
>
> config REED_SOLOMON_ENC16
> - boolean
> + bool
>
> config REED_SOLOMON_DEC16
> - boolean
> + bool
>
> #
> # BCH support is selected if needed
> @@ -284,7 +284,7 @@ config BCH
> tristate
>
> config BCH_CONST_PARAMS
> - boolean
> + bool
> help
> Drivers may select this option to force specific constant
> values for parameters 'm' (Galois field order) and 't'
> @@ -320,7 +320,7 @@ config BCH_CONST_T
> # Textsearch support is select'ed if needed
> #
> config TEXTSEARCH
> - boolean
> + bool
>
> config TEXTSEARCH_KMP
> tristate
> @@ -332,10 +332,10 @@ config TEXTSEARCH_FSM
> tristate
>
> config BTREE
> - boolean
> + bool
>
> config INTERVAL_TREE
> - boolean
> + bool
> help
> Simple, embeddable, interval-tree. Can find the start of an
> overlapping range in log(n) time and then iterate over all
> @@ -363,18 +363,18 @@ config ASSOCIATIVE_ARRAY
> for more information.
>
> config HAS_IOMEM
> - boolean
> + bool
> depends on !NO_IOMEM
> select GENERIC_IO
> default y
>
> config HAS_IOPORT_MAP
> - boolean
> + bool
> depends on HAS_IOMEM && !NO_IOPORT_MAP
> default y
>
> config HAS_DMA
> - boolean
> + bool
> depends on !NO_DMA
> default y
>
> diff --git a/mm/Kconfig b/mm/Kconfig
> index 1d1ae6b..3953f41 100644
> --- a/mm/Kconfig
> +++ b/mm/Kconfig
> @@ -129,28 +129,28 @@ config SPARSEMEM_VMEMMAP
> efficient option when sufficient kernel resources are available.
>
> config HAVE_MEMBLOCK
> - boolean
> + bool
>
> config HAVE_MEMBLOCK_NODE_MAP
> - boolean
> + bool
>
> config HAVE_MEMBLOCK_PHYS_MAP
> - boolean
> + bool
>
> config HAVE_GENERIC_RCU_GUP
> - boolean
> + bool
>
> config ARCH_DISCARD_MEMBLOCK
> - boolean
> + bool
>
> config NO_BOOTMEM
> - boolean
> + bool
>
> config MEMORY_ISOLATION
> - boolean
> + bool
>
> config MOVABLE_NODE
> - boolean "Enable to assign a node which has only movable memory"
> + bool "Enable to assign a node which has only movable memory"
> depends on HAVE_MEMBLOCK
> depends on NO_BOOTMEM
> depends on X86_64
> @@ -228,12 +228,12 @@ config SPLIT_PTLOCK_CPUS
> default "4"
>
> config ARCH_ENABLE_SPLIT_PMD_PTLOCK
> - boolean
> + bool
>
> #
> # support for memory balloon
> config MEMORY_BALLOON
> - boolean
> + bool
>
> #
> # support for memory balloon compaction
> @@ -276,7 +276,7 @@ config MIGRATION
> allocation instead of reclaiming.
>
> config ARCH_ENABLE_HUGEPAGE_MIGRATION
> - boolean
> + bool
>
> config PHYS_ADDR_T_64BIT
> def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT
> diff --git a/net/Kconfig b/net/Kconfig
> index ff9ffc1..44dd578 100644
> --- a/net/Kconfig
> +++ b/net/Kconfig
> @@ -231,18 +231,18 @@ source "net/hsr/Kconfig"
> source "net/switchdev/Kconfig"
>
> config RPS
> - boolean
> + bool
> depends on SMP && SYSFS
> default y
>
> config RFS_ACCEL
> - boolean
> + bool
> depends on RPS
> select CPU_RMAP
> default y
>
> config XPS
> - boolean
> + bool
> depends on SMP
> default y
>
> @@ -254,18 +254,18 @@ config CGROUP_NET_PRIO
> a per-interface basis.
>
> config CGROUP_NET_CLASSID
> - boolean "Network classid cgroup"
> + bool "Network classid cgroup"
> depends on CGROUPS
> ---help---
> Cgroup subsystem for use as general purpose socket classid marker that is
> being used in cls_cgroup and for netfilter matching.
>
> config NET_RX_BUSY_POLL
> - boolean
> + bool
> default y
>
> config BQL
> - boolean
> + bool
> depends on SYSFS
> select DQL
> default y
> @@ -282,7 +282,7 @@ config BPF_JIT
> this feature changing /proc/sys/net/core/bpf_jit_enable
>
> config NET_FLOW_LIMIT
> - boolean
> + bool
> depends on RPS
> default y
> ---help---
> diff --git a/net/sched/Kconfig b/net/sched/Kconfig
> index c54c9d9..706af73 100644
> --- a/net/sched/Kconfig
> +++ b/net/sched/Kconfig
> @@ -348,7 +348,7 @@ config NET_SCH_PLUG
> comment "Classification"
>
> config NET_CLS
> - boolean
> + bool
>
> config NET_CLS_BASIC
> tristate "Elementary classification (BASIC)"
> diff --git a/net/switchdev/Kconfig b/net/switchdev/Kconfig
> index 1557545..86a47e1 100644
> --- a/net/switchdev/Kconfig
> +++ b/net/switchdev/Kconfig
> @@ -3,7 +3,7 @@
> #
>
> config NET_SWITCHDEV
> - boolean "Switch (and switch-ish) device support (EXPERIMENTAL)"
> + bool "Switch (and switch-ish) device support (EXPERIMENTAL)"
> depends on INET
> ---help---
> This module provides glue between core networking code and device
> diff --git a/security/integrity/Kconfig b/security/integrity/Kconfig
> index b76235a..73c457b 100644
> --- a/security/integrity/Kconfig
> +++ b/security/integrity/Kconfig
> @@ -16,7 +16,7 @@ config INTEGRITY
> if INTEGRITY
>
> config INTEGRITY_SIGNATURE
> - boolean "Digital signature verification using multiple keyrings"
> + bool "Digital signature verification using multiple keyrings"
> depends on KEYS
> default n
> select SIGNATURE
> @@ -30,7 +30,7 @@ config INTEGRITY_SIGNATURE
> usually only added from initramfs.
>
> config INTEGRITY_ASYMMETRIC_KEYS
> - boolean "Enable asymmetric keys support"
> + bool "Enable asymmetric keys support"
> depends on INTEGRITY_SIGNATURE
> default n
> select ASYMMETRIC_KEY_TYPE
> diff --git a/security/integrity/evm/Kconfig b/security/integrity/evm/Kconfig
> index df586fa..bf19723 100644
> --- a/security/integrity/evm/Kconfig
> +++ b/security/integrity/evm/Kconfig
> @@ -1,5 +1,5 @@
> config EVM
> - boolean "EVM support"
> + bool "EVM support"
> select KEYS
> select ENCRYPTED_KEYS
> select CRYPTO_HMAC
> --
> 2.1.0
>

Suggested-by: Daniel Borkmann <dborkman@redhat.com>

Cheers,
Chris