From: matt mooney <mfm@muteddisk.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: kernel-janitors@vger.kernel.org,
"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kbuild@vger.kernel.org
Subject: Re: [PATCH 05/24] i2c: change to new flag variable
Date: Sun, 26 Sep 2010 11:07:26 -0700 [thread overview]
Message-ID: <20100926180726.GD8191@haskell.muteddisk.com> (raw)
In-Reply-To: <20100926092931.68980448@endymion.delvare>
On 09:29 Sun 26 Sep , Jean Delvare wrote:
> On Sat, 25 Sep 2010 19:12:17 -0700, matt mooney wrote:
> > On 13:26 Sat 25 Sep , Jean Delvare wrote:
> > > On Fri, 24 Sep 2010 12:17:15 -0700, matt mooney wrote:
> > > > Replace EXTRA_CFLAGS with ccflags-y.
> > > >
> > > > Signed-off-by: matt mooney <mfm@muteddisk.com>
> > > > ---
> > > > drivers/i2c/Makefile | 4 +---
> > > > drivers/i2c/algos/Makefile | 4 +---
> > > > drivers/i2c/busses/Makefile | 4 +---
> > > > drivers/i2c/muxes/Makefile | 4 +---
> > > > 4 files changed, 4 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
> > > > index c00fd66..23ac61e 100644
> > > > --- a/drivers/i2c/Makefile
> > > > +++ b/drivers/i2c/Makefile
> > > > @@ -9,6 +9,4 @@ obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
> > > > obj-$(CONFIG_I2C_MUX) += i2c-mux.o
> > > > obj-y += algos/ busses/ muxes/
> > > >
> > > > -ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
> > > > -EXTRA_CFLAGS += -DDEBUG
> > > > -endif
> > > > +ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
> > > > diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
> > > > index 18b3e96..215303f 100644
> > > > --- a/drivers/i2c/algos/Makefile
> > > > +++ b/drivers/i2c/algos/Makefile
> > > > @@ -6,6 +6,4 @@ obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
> > > > obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
> > > > obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o
> > > >
> > > > -ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
> > > > -EXTRA_CFLAGS += -DDEBUG
> > > > -endif
> > > > +ccflags-$(CONFIG_I2C_DEBUG_ALGO) := -DDEBUG
> > > > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> > > > index c3ef492..033ad41 100644
> > > > --- a/drivers/i2c/busses/Makefile
> > > > +++ b/drivers/i2c/busses/Makefile
> > > > @@ -76,6 +76,4 @@ obj-$(CONFIG_I2C_STUB) += i2c-stub.o
> > > > obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
> > > > obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
> > > >
> > > > -ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
> > > > -EXTRA_CFLAGS += -DDEBUG
> > > > -endif
> > > > +ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
> > > > diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
> > > > index bd83b52..6f49786 100644
> > > > --- a/drivers/i2c/muxes/Makefile
> > > > +++ b/drivers/i2c/muxes/Makefile
> > > > @@ -3,6 +3,4 @@
> > > >
> > > > obj-$(CONFIG_I2C_MUX_PCA954x) += pca954x.o
> > > >
> > > > -ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
> > > > -EXTRA_CFLAGS += -DDEBUG
> > > > -endif
> > > > +ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
> > >
> > > If this is the way the whole kernel is going, I have no objection.
> >
> > Sam had implemented these newer style flag variables a while back as an
> > eloquent way of handling conditional flags. A lot of newer (and some older)
> > modules and subsystems were using them already, so to provide uniformity and for
> > an eventual removal of the deprecated flags, I converted all remaining instances
> > to the newer style. (IMHO, I think it flows better with the way the rest of the
> > build system works.)
>
> Fine with me. What's the planned merge path for this patch? Will you
> push all the patches upstream yourself, or do you expect me to pick
> this one?
I was hoping subsystem maintainers would pick them up, but a lot of the patches
have been acked without being applied. My new plan is to have the unapplied ones
go through the kbuild tree. So you can either pick it up or just ack it.
Thanks,
mfm
next prev parent reply other threads:[~2010-09-26 18:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <e0bdab5d2e8c52041c003de68ba774c3e706716c.1285355033.git.mfm@muteddisk.com>
2010-09-25 2:52 ` [PATCH 01/24] base: change to new flag variable Américo Wang
[not found] ` <9968d4260be8850200cc9c7dfe08addf611468b4.1285355033.git.mfm@muteddisk.com>
[not found] ` <036514b5dd23c5af14303519d79d60d79adccbee.1285355033.git.mfm@muteddisk.com>
[not found] ` <ffbd189ef2d414ea7c87ffe2b40fce87877dc014.1285355033.git.mfm@muteddisk.com>
[not found] ` <b3e2061e1e6703f7b84c0484030e07de6000546a.1285355033.git.mfm@muteddisk.com>
[not found] ` <20100925132611.03ef0882@endymion.delvare>
[not found] ` <20100926021217.GC8191@haskell.muteddisk.com>
[not found] ` <20100926092931.68980448@endymion.delvare>
2010-09-26 18:07 ` matt mooney [this message]
2010-09-29 13:56 ` [PATCH 05/24] i2c: " Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100926180726.GD8191@haskell.muteddisk.com \
--to=mfm@muteddisk.com \
--cc=ben-linux@fluff.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=khali@linux-fr.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox