From: Dmitry Voytik <voytikd@gmail.com>
To: Nathan Chancellor <nathan@kernel.org>, Nicolas Schier <nsc@kernel.org>
Cc: Nicolas Schier <n.schier@fritz.com>,
linux-kernel@vger.kernel.org, linux-kbuild@vger.kernel.org,
Dmitry Voytik <voytikd@gmail.com>
Subject: [PATCH v8] scripts/config: honor $KBUILD_OUTPUT by default
Date: Tue, 17 Nov 2026 14:25:12 +0100 [thread overview]
Message-ID: <20261117132513.52725-1-voytikd@gmail.com> (raw)
If $KBUILD_OUTPUT is set, use it by default if --file is not passed.
Fix the issue when the script silently updates a stale .config in
the root directory, while the user expects ${KBUILD_OUTPUT}/.config
to be updated.
Handle properly if the config file is a relative path.
The problem can be worked around with --file, but this is easy to miss,
and is inconsistent with how the Makefile and other tools work
(e.g., scripts/diffconfig).
How to reproduce the issue:
make mrproper
export KBUILD_OUTPUT=.out
make defconfig
./scripts/config \
-e CONFIG_UBSAN
Error reported:
grep: .config: No such file or directory
Signed-off-by: Dmitry Voytik <voytikd@gmail.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
---
How the patch was tested:
make mrproper
export KBUILD_OUTPUT=.out
make defconfig
grep "CONFIG_UBSAN=y" $KBUILD_OUTPUT/.config || echo "OK"
Test the basic usage:
./scripts/config -e CONFIG_UBSAN
grep "CONFIG_UBSAN=y" $KBUILD_OUTPUT/.config && echo "OK"
Test --refresh picks up correct config file by using $KBUILD_OUTPUT:
./scripts/config -d CONFIG_UBSAN
grep "CONFIG_UBSAN=y" $KBUILD_OUTPUT/.config && echo "FAIL"
./scripts/config --refresh -e CONFIG_UBSAN
grep "CONFIG_UBSAN=y" $KBUILD_OUTPUT/.config && echo "OK"
Test --file takes precedence over $KBUILD_OUTPUT and a relative
path is handled properly:
./scripts/config -d CONFIG_UBSAN
mkdir .out2
cp .out/.config .out2/.my_config
grep "CONFIG_UBSAN=y" .out2/.my_config && echo "FAIL"
./scripts/config --file .out2/.my_config --refresh \
-e CONFIG_UBSAN
grep "CONFIG_UBSAN=y" .out2/.my_config && echo "OK"
ls .out/.out2 && echo "FAIL"
ls .out/.out && echo "FAIL"
Test --file can accept files with hyphen:
./scripts/config -d CONFIG_UBSAN
cp .out/.config -- -my_config
grep "CONFIG_UBSAN=y" -- -my_config && echo "FAIL"
./scripts/config --refresh \
-e CONFIG_UBSAN --file -my_config
grep "CONFIG_UBSAN=y" -- -my_config && echo "OK"
---
v8:
* Nathan Chancellor ironed out the patch to the acceptable state
v7:
* Adressed https://sashiko.dev/#/patchset/20261006142337.821859-1-voytikd%40gmail.com
v6:
* Per Nathan Chancellor's suggestions, simplified
* https://lore.kernel.org/lkml/179121581235.2275809.12565811683284940522.b4-review@b4/
v5:
* Per Nathan Chancellor's suggestion, improved handling $FN path by
realpath
* https://lore.kernel.org/lkml/179097210878.309835.10523307262544578337.b4-review@b4/
* Documented the new test scenario in the git commit message
v4:
* Addressed Nicolas Schier's comments - dropped the change how '--refresh'
is handled
* Implemented conversion of $FN to the absolute path which helps with
'--refresh' and relative paths
* Documented testing steps in the commit message
v3:
* Added an example in the commit message how to reproduce the issue
v2:
* Addressed comments by sashiko:
* https://sashiko.dev/#/patchset/20260920064350.17999-1-voytikd%40gmail.com
* use basename when --refresh is used
* remove echo which can be misleading when --file is passed
v1:
* https://lore.kernel.org/all/20260920064350.17999-1-voytikd@gmail.com/
---
scripts/config | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/scripts/config b/scripts/config
index 32428ea909c2..13b87b7f316a 100755
--- a/scripts/config
+++ b/scripts/config
@@ -144,6 +144,22 @@ while [[ $# -gt 0 ]]; do
fi
done
+# If no '--file' was specified, use KBUILD_OUTPUT as the base if it exists
+if [[ "$FN" = ".config" && -n "$KBUILD_OUTPUT" ]]; then
+ if [[ ! -d "$KBUILD_OUTPUT" ]]; then
+ echo "KBUILD_OUTPUT is set ('$KBUILD_OUTPUT') but does not exist or is not a directory." >&2
+ echo "Create it before running $myname or use '--file' to specify configuration file." >&2
+ exit 1
+ fi
+ FN="$KBUILD_OUTPUT/$FN"
+fi
+# Turn FN into an absolute path if it is relative so that '--refresh' works on
+# the correct file. This does not use realpath, as $FN may not exist yet.
+case "$FN" in
+ /*) ;;
+ *) FN="$PWD/$FN" ;;
+esac
+
set -- "${CMDS[@]}"
if [ "$1" = "" ] ; then
usage
@@ -200,10 +216,10 @@ while [ "$1" != "" ] ; do
;;
--state|-s)
- if grep -q "# ${CONFIG_}$ARG is not set" $FN ; then
+ if grep -q "# ${CONFIG_}$ARG is not set" "$FN" ; then
echo n
else
- V="$(grep "^${CONFIG_}$ARG=" $FN)"
+ V="$(grep "^${CONFIG_}$ARG=" "$FN")"
if [ $? != 0 ] ; then
echo undef
else
@@ -229,7 +245,7 @@ while [ "$1" != "" ] ; do
;;
--refresh)
- yes "" | make oldconfig KCONFIG_CONFIG=$FN
+ yes "" | make oldconfig KCONFIG_CONFIG="$FN"
;;
*)
--
2.56.1
reply other threads:[~2026-11-17 13:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117132513.52725-1-voytikd@gmail.com \
--to=voytikd@gmail.com \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=n.schier@fritz.com \
--cc=nathan@kernel.org \
--cc=nsc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox