Re: make-3.82 and built in firmware

Re: make-3.82 and built in firmware

[Sam Ravnborg]

On Fri, Aug 06, 2010 at 01:45:09PM +0100, Andrew Benton wrote:
> Hello World
> I recently upgraded to the latest version of make, 3.82. One of the 
> problems I've had with it is that I can no longer recompile my kernel 
> with built in firmware enabled. If I have 
> CONFIG_FIRMWARE_IN_KERNEL=y
> then the build fails like so:
> 
>   IKCFG   kernel/config_data.h
>   CC      kernel/configs.o
>   LD      kernel/built-in.o
> make[2]: *** No rule to make target `/tmp/linux-build-dir/firmware/radeon/', needed by `firmware/radeon/R100_cp.bin.gen.S'.  Stop.
> make[1]: *** [firmware] Error 2
> make: *** [sub-make] Error 2
> andy:~/save/src/linux-2.6$ 

Thanks for the report.
I saw a similar report whare make 3.82 was accused - maybe this was also from you.

Can you positively confirm that this is a make 3.82 issue - or do you just expect so?

To narrow down this a bit further can I ask you
to send the output of "make -j1 V=1" - especially
the lines before you see the bug.

[-j1 is to force you to avoid parallel makes
 as this may clutter up the output]

Please also post a copy of your configuration
as this allows us to better reproduce what you see.

> Please CC, I'm not subscribed
No problem - we always do so at lkml.

	Sam

Re: make-3.82 and built in firmware

[Andrew Benton]

[-- Attachment #1: Type: text/plain, Size: 1216 bytes --]

On 06/08/10 14:46, Sam Ravnborg wrote:
> Thanks for the report.
> I saw a similar report whare make 3.82 was accused - maybe this was also from you.
> 
> Can you positively confirm that this is a make 3.82 issue - or do you just expect so?
> 
I'm certain that it relates to make-3.82. I've installed make-3.81 just so I can recompile my kernel. If I use:
make-3.81 O=/tmp/linux-build-dir -j4
then the build succeeds.

> To narrow down this a bit further can I ask you
> to send the output of "make -j1 V=1" - especially
> the lines before you see the bug.

make -j1 V=1 O=/tmp/linux-build-dir

... snip ...
  LD      sound/usb/caiaq/built-in.o
  LD      sound/usb/misc/built-in.o
  LD      sound/usb/usx2y/built-in.o
  LD      sound/usb/built-in.o
  CC      sound/last.o
  LD      sound/built-in.o
  MK_FW   firmware/rt2561s.bin.gen.S
  AS      firmware/rt2561s.bin.gen.o
make[2]: *** No rule to make target `/tmp/linux-build-dir/firmware/radeon/', needed by `firmware/radeon/R700_rlc.bin.gen.S'.  Stop.
make[1]: *** [firmware] Error 2
make: *** [sub-make] Error 2
andy:~$ 

> Please also post a copy of your configuration
> as this allows us to better reproduce what you see.
> 
I've attached /proc/config.gz

Andy

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 13199 bytes --]