[PATCH] docs: fix spelling mistakes in HID documentation

Ankit Chauhan
2025-04-30T06:24:22Z

This commit fixes spelling mistakes in the HID documentation:

- 'triggerred' is corrected to 'triggered' in multiple places.

Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com>
---
Documentation/hid/intel-thc-hid.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/hid/intel-thc-hid.rst b/Documentation/hid/intel-thc-hid.rst
index 6c417205ac6a..5e0dc51c8d20 100644
--- a/Documentation/hid/intel-thc-hid.rst
+++ b/Documentation/hid/intel-thc-hid.rst
@@ -182,7 +182,7 @@ value and use PIO write (by setting SubIP write opcode) to do a write operation.

THC also includes two GPIO pins, one for interrupt and the other for device reset control.

-Interrupt line can be configured to either level triggerred or edge triggerred by setting MMIO
+Interrupt line can be configured to either level triggered or edge triggered by setting MMIO
Control register.

Reset line is controlled by BIOS (or EFI) through ACPI _RST method, driver needs to call this
@@ -302,9 +302,9 @@ waiting for interrupt ready then read out the data from system memory.
3.3.2 Software DMA channel
~~~~~~~~~~~~~~~~~~~~~~~~~~

-THC supports a software triggerred RxDMA mode to read the touch data from touch IC. This SW RxDMA
+THC supports a software triggered RxDMA mode to read the touch data from touch IC. This SW RxDMA
is the 3rd THC RxDMA engine with the similar functionalities as the existing two RxDMAs, the only
-difference is this SW RxDMA is triggerred by software, and RxDMA2 is triggerred by external Touch IC
+difference is this SW RxDMA is triggered by software, and RxDMA2 is triggered by external Touch IC
interrupt. It gives a flexiblity to software driver to use RxDMA read Touch IC data in any time.

Before software starts a SW RxDMA, it shall stop the 1st and 2nd RxDMA, clear PRD read/write pointer
--
2.34.1