[PATCH] firewire: init_ohci1394_dma: add missing function parameter documentation

[Nirbhay Sharma <nirbhay.lkd@gmail.com>]

Add missing kernel-doc parameter descriptions for five functions
in init_ohci1394_dma.c to fix documentation warnings when building
with W=1.

This patch addresses the following warnings:
- init_ohci1394_wait_for_busresets: missing @ohci description
- init_ohci1394_enable_physical_dma: missing @ohci description
- init_ohci1394_reset_and_init_dma: missing @ohci description
- init_ohci1394_controller: missing @num, @slot, @func descriptions
- setup_ohci1394_dma: missing @opt description

Tested with GCC 13.2.0 and W=1 flag. All documentation warnings
for these functions have been resolved.

Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
---
 drivers/firewire/init_ohci1394_dma.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/firewire/init_ohci1394_dma.c b/drivers/firewire/init_ohci1394_dma.c
index 48b879e9e831..121f0c2f6401 100644
--- a/drivers/firewire/init_ohci1394_dma.c
+++ b/drivers/firewire/init_ohci1394_dma.c
@@ -167,6 +167,7 @@ static inline void __init init_ohci1394_initialize(struct ohci *ohci)
 
 /**
  * init_ohci1394_wait_for_busresets - wait until bus resets are completed
+ * @ohci: Pointer to the OHCI-1394 controller structure
  *
  * OHCI1394 initialization itself and any device going on- or offline
  * and any cable issue cause a IEEE1394 bus reset. The OHCI1394 spec
@@ -189,6 +190,8 @@ static inline void __init init_ohci1394_wait_for_busresets(struct ohci *ohci)
 
 /**
  * init_ohci1394_enable_physical_dma - Enable physical DMA for remote debugging
+ * @ohci: Pointer to the OHCI-1394 controller structure
+ *
  * This enables remote DMA access over IEEE1394 from every host for the low
  * 4GB of address space. DMA accesses above 4GB are not available currently.
  */
@@ -201,6 +204,8 @@ static inline void __init init_ohci1394_enable_physical_dma(struct ohci *ohci)
 
 /**
  * init_ohci1394_reset_and_init_dma - init controller and enable DMA
+ * @ohci: Pointer to the OHCI-1394 controller structure
+ *
  * This initializes the given controller and enables physical DMA engine in it.
  */
 static inline void __init init_ohci1394_reset_and_init_dma(struct ohci *ohci)
@@ -230,6 +235,10 @@ static inline void __init init_ohci1394_reset_and_init_dma(struct ohci *ohci)
 
 /**
  * init_ohci1394_controller - Map the registers of the controller and init DMA
+ * @num: PCI bus number
+ * @slot: PCI device number
+ * @func: PCI function number
+ *
  * This maps the registers of the specified controller and initializes it
  */
 static inline void __init init_ohci1394_controller(int num, int slot, int func)
@@ -284,6 +293,7 @@ void __init init_ohci1394_dma_on_all_controllers(void)
 
 /**
  * setup_ohci1394_dma - enables early OHCI1394 DMA initialization
+ * @opt: Kernel command line parameter string
  */
 static int __init setup_ohci1394_dma(char *opt)
 {
-- 
2.48.1