On Thu, May 22, 2025 at 02:52:53PM +0300, Hanne-Lotta Mäenpää wrote: > diff --git a/Documentation/userspace-api/media/v4l/biblio.rst b/Documentation/userspace-api/media/v4l/biblio.rst > index 35674eeae20d..856acf6a890c 100644 > --- a/Documentation/userspace-api/media/v4l/biblio.rst > +++ b/Documentation/userspace-api/media/v4l/biblio.rst > @@ -150,7 +150,7 @@ ITU-T.81 > ======== > > > -:title: ITU-T Recommendation T.81 "Information Technology --- Digital Compression and Coding of Continous-Tone Still Images --- Requirements and Guidelines" > +:title: ITU-T Recommendation T.81 "Information Technology --- Digital Compression and Coding of Continuous-Tone Still Images --- Requirements and Guidelines" > > :author: International Telecommunication Union (http://www.itu.int) > > diff --git a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst > index 42cdb0a9f786..96e0e85a822c 100644 > --- a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst > +++ b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst > @@ -48,7 +48,7 @@ capabilities, and they may support :ref:`control` ioctls. > The :ref:`video standard ` ioctls provide information vital > to program a sliced VBI device, therefore must be supported. > > -.. _sliced-vbi-format-negotitation: > +.. _sliced-vbi-format-negotiation: > > Sliced VBI Format Negotiation > ============================= > @@ -377,7 +377,7 @@ Sliced VBI Data in MPEG Streams > > If a device can produce an MPEG output stream, it may be capable of > providing > -:ref:`negotiated sliced VBI services ` > +:ref:`negotiated sliced VBI services ` > as data embedded in the MPEG stream. Users or applications control this > sliced VBI data insertion with the > :ref:`V4L2_CID_MPEG_STREAM_VBI_FMT ` > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst > index b6cfc0e823d2..ccd439e9e0e3 100644 > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst > @@ -64,17 +64,12 @@ FM_RX Control IDs > broadcasts speech. If the transmitter doesn't make this distinction, > then it will be set. > > -``V4L2_CID_TUNE_DEEMPHASIS`` > - (enum) > - > -enum v4l2_deemphasis - > +``V4L2_CID_TUNE_DEEMPHASIS (enum)`` > Configures the de-emphasis value for reception. A de-emphasis filter > is applied to the broadcast to accentuate the high audio > frequencies. Depending on the region, a time constant of either 50 > - or 75 useconds is used. The enum v4l2_deemphasis defines possible > - values for de-emphasis. Here they are: > - > - > + or 75 microseconds is used. The enum v4l2_deemphasis defines possible > + values for de-emphasis. They are: > > .. flat-table:: > :header-rows: 0 > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst > index 04c997c9a4c3..cb40cf4cc3ec 100644 > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst > @@ -104,7 +104,7 @@ FM_TX Control IDs > > ``V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (integer)`` > Sets the audio deviation limiter feature release time. Unit is in > - useconds. Step and range are driver-specific. > + microseconds. Step and range are driver-specific. > > ``V4L2_CID_AUDIO_LIMITER_DEVIATION (integer)`` > Configures audio frequency deviation level in Hz. The range and step > @@ -121,16 +121,16 @@ FM_TX Control IDs > range and step are driver-specific. > > ``V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (integer)`` > - Sets the threshold level for audio compression freature. It is a dB > + Sets the threshold level for audio compression feature. It is a dB > value. The range and step are driver-specific. > > ``V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (integer)`` > - Sets the attack time for audio compression feature. It is a useconds > + Sets the attack time for audio compression feature. It is a microseconds > value. The range and step are driver-specific. > > ``V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (integer)`` > Sets the release time for audio compression feature. It is a > - useconds value. The range and step are driver-specific. > + microseconds value. The range and step are driver-specific. > > ``V4L2_CID_PILOT_TONE_ENABLED (boolean)`` > Enables or disables the pilot tone generation feature. > @@ -143,17 +143,12 @@ FM_TX Control IDs > Configures pilot tone frequency value. Unit is in Hz. The range and > step are driver-specific. > > -``V4L2_CID_TUNE_PREEMPHASIS`` > - (enum) > - > -enum v4l2_preemphasis - > +``V4L2_CID_TUNE_PREEMPHASIS (enum)`` > Configures the pre-emphasis value for broadcasting. A pre-emphasis > filter is applied to the broadcast to accentuate the high audio > frequencies. Depending on the region, a time constant of either 50 > - or 75 useconds is used. The enum v4l2_preemphasis defines possible > - values for pre-emphasis. Here they are: > - > - > + or 75 microseconds is used. The enum v4l2_preemphasis defines possible > + values for pre-emphasis. They are: > > .. flat-table:: > :header-rows: 0 > @@ -166,8 +161,6 @@ enum v4l2_preemphasis - > * - ``V4L2_PREEMPHASIS_75_uS`` > - A pre-emphasis of 75 uS is used. > > - > - > ``V4L2_CID_TUNE_POWER_LEVEL (integer)`` > Sets the output power level for signal transmission. Unit is in > dBuV. Range and step are driver-specific. > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst > index 7c3810ff783c..8c03aedcc00e 100644 > --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst > +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst > @@ -6,7 +6,7 @@ > .. _v4l2-pix-fmt-sgrbg12p: > > ******************************************************************************************************************************* > -V4L2_PIX_FMT_SRGGB12P ('pRCC'), V4L2_PIX_FMT_SGRBG12P ('pgCC'), V4L2_PIX_FMT_SGBRG12P ('pGCC'), V4L2_PIX_FMT_SBGGR12P ('pBCC'), > +V4L2_PIX_FMT_SRGGB12P ('pRCC'), V4L2_PIX_FMT_SGRBG12P ('pgCC'), V4L2_PIX_FMT_SGBRG12P ('pGCC'), V4L2_PIX_FMT_SBGGR12P ('pBCC') > ******************************************************************************************************************************* > > > @@ -20,7 +20,7 @@ Description > These four pixel formats are packed raw sRGB / Bayer formats with 12 > bits per colour. Every two consecutive samples are packed into three > bytes. Each of the first two bytes contain the 8 high order bits of > -the pixels, and the third byte contains the four least significants > +the pixels, and the third byte contains the four least significant > bits of each pixel, in the same order. > > Each n-pixel row contains n/2 green samples and n/2 blue or red > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst > index 3572e42adb22..f4f53d7dbdeb 100644 > --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst > +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst > @@ -24,7 +24,7 @@ These four pixel formats are packed raw sRGB / Bayer formats with 14 > bits per colour. Every four consecutive samples are packed into seven > bytes. Each of the first four bytes contain the eight high order bits > of the pixels, and the three following bytes contains the six least > -significants bits of each pixel, in the same order. > +significant bits of each pixel, in the same order. > > Each n-pixel row contains n/2 green samples and n/2 blue or red samples, > with alternating green-red and green-blue rows. They are conventionally LGTM, thanks! Reviewed-by: Bagas Sanjaya -- An old man doll... just what I always wanted! - Clara