From: Ilya Leoshkevich <iii@linux.ibm.com>
To: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org,
Heiko Carstens <heiko.carstens@de.ibm.com>,
Vasily Gorbik <gor@linux.ibm.com>,
Ilya Leoshkevich <iii@linux.ibm.com>
Subject: [PATCH v2] selftests: fix prepending $(OUTPUT) to $(TEST_PROGS)
Date: Tue, 10 Sep 2019 13:18:13 +0100 [thread overview]
Message-ID: <20190910121813.45742-1-iii@linux.ibm.com> (raw)
The current logic prepends $(OUTPUT) only to the first member of
$(TEST_PROGS). Use $(addprefix) to prepend it to each member.
Also, $(OUTPUT) is assumed to end with a / almost everywhere else in
the kernel, make this the case for kselftest as well.
Fixes: 1a940687e424 ("selftests: lib.mk: copy test scripts and test files for make O=dir run")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
---
v1->v2:
- Append / to $(OUTPUT).
- Use $(addprefix) instead of $(foreach).
tools/testing/selftests/Makefile | 16 ++++++++--------
tools/testing/selftests/lib.mk | 3 ++-
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index c3feccb99ff5..49bcd066907e 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -136,31 +136,31 @@ all: khdr
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
mkdir $$BUILD_TARGET -p; \
- $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET/ -C $$TARGET;\
done;
run_tests: all
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET/ -C $$TARGET run_tests;\
done;
hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET/ -C $$TARGET;\
done;
run_hotplug: hotplug
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET/ -C $$TARGET run_full_test;\
done;
clean_hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET/ -C $$TARGET clean;\
done;
run_pstore_crash:
@@ -184,7 +184,7 @@ ifdef INSTALL_PATH
install -m 744 kselftest/prefix.pl $(INSTALL_PATH)/kselftest/
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
+ $(MAKE) OUTPUT=$$BUILD_TARGET/ -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
done;
@# Ask all targets to emit their test scripts
@@ -203,7 +203,7 @@ ifdef INSTALL_PATH
echo "[ -w /dev/kmsg ] && echo \"kselftest: Running tests in $$TARGET\" >> /dev/kmsg" >> $(ALL_SCRIPT); \
echo "cd $$TARGET" >> $(ALL_SCRIPT); \
echo -n "run_many" >> $(ALL_SCRIPT); \
- $(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
+ $(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET/ -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
echo "" >> $(ALL_SCRIPT); \
echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
done;
@@ -216,7 +216,7 @@ endif
clean:
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET/ -C $$TARGET clean;\
done;
.PHONY: khdr all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index 1c8a1963d03f..27a97a1b4e9e 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -75,7 +75,8 @@ ifdef building_out_of_srctree
@rsync -aq $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) $(OUTPUT)
fi
@if [ "X$(TEST_PROGS)" != "X" ]; then
- $(call RUN_TESTS, $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) $(OUTPUT)/$(TEST_PROGS))
+ $(call RUN_TESTS, $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS) \
+ $(addprefix $(OUTPUT),$(TEST_PROGS)))
else
$(call RUN_TESTS, $(TEST_GEN_PROGS) $(TEST_CUSTOM_PROGS))
fi
--
2.21.0
next reply other threads:[~2019-09-10 12:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-10 12:18 Ilya Leoshkevich [this message]
2019-09-16 16:18 ` [PATCH v2] selftests: fix prepending $(OUTPUT) to $(TEST_PROGS) shuah
2019-09-30 17:50 ` Ilya Leoshkevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190910121813.45742-1-iii@linux.ibm.com \
--to=iii@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-kselftest@vger.kernel.org \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox