Linux Kernel Selftest development
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-kselftest@vger.kernel.org,
	"Reinette Chatre" <reinette.chatre@intel.com>,
	"Shuah Khan" <shuah@kernel.org>,
	"Babu Moger" <babu.moger@amd.com>,
	"Maciej Wieczór-Retman" <maciej.wieczor-retman@intel.com>
Cc: "Fenghua Yu" <fenghua.yu@intel.com>,
	linux-kernel@vger.kernel.org,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 02/13] selftests/resctrl: Calculate resctrl FS derived mem bw over sleep(1) only
Date: Mon, 11 Mar 2024 15:52:19 +0200	[thread overview]
Message-ID: <20240311135230.7007-3-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20240311135230.7007-1-ilpo.jarvinen@linux.intel.com>

For MBM/MBA tests, measure_vals() calls get_mem_bw_imc() that performs
the measurement over a duration of sleep(1) call. The memory bandwidth
numbers from IMC are derived over this duration. The resctrl FS derived
memory bandwidth, however, is calculated inside measure_vals() and only
takes delta between the previous value and the current one which
besides the actual test, also samples inter-test noise.

Rework the logic in measure_vals() and get_mem_bw_imc() such that the
resctrl FS memory bandwidth section covers much shorter duration
closely matching that of the IMC perf counters to improve measurement
accuracy.

Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 tools/testing/selftests/resctrl/resctrl_val.c | 72 +++++++++++++------
 1 file changed, 50 insertions(+), 22 deletions(-)

diff --git a/tools/testing/selftests/resctrl/resctrl_val.c b/tools/testing/selftests/resctrl/resctrl_val.c
index 36139cba7be8..4df2cd738f88 100644
--- a/tools/testing/selftests/resctrl/resctrl_val.c
+++ b/tools/testing/selftests/resctrl/resctrl_val.c
@@ -293,28 +293,35 @@ static int initialize_mem_bw_imc(void)
 }
 
 /*
- * get_mem_bw_imc:	Memory band width as reported by iMC counters
+ * perf_open_imc_mem_bw - Open perf fds for IMCs
  * @cpu_no:		CPU number that the benchmark PID is binded to
- * @bw_report:		Bandwidth report type (reads, writes)
- *
- * Memory B/W utilized by a process on a socket can be calculated using
- * iMC counters. Perf events are used to read these counters.
- *
- * Return: = 0 on success. < 0 on failure.
  */
-static int get_mem_bw_imc(int cpu_no, char *bw_report, float *bw_imc)
+static int perf_open_imc_mem_bw(int cpu_no)
 {
-	float reads, writes, of_mul_read, of_mul_write;
 	int imc, j, ret;
 
-	/* Start all iMC counters to log values (both read and write) */
-	reads = 0, writes = 0, of_mul_read = 1, of_mul_write = 1;
 	for (imc = 0; imc < imcs; imc++) {
 		for (j = 0; j < 2; j++) {
 			ret = open_perf_event(imc, cpu_no, j);
 			if (ret)
 				return -1;
 		}
+	}
+
+	return 0;
+}
+
+/*
+ * do_mem_bw_test - Perform memory bandwidth test
+ *
+ * Runs memory bandwidth test over one second period. Also, handles starting
+ * and stopping of the IMC perf counters around the test.
+ */
+static void do_imc_mem_bw_test(void)
+{
+	int imc, j;
+
+	for (imc = 0; imc < imcs; imc++) {
 		for (j = 0; j < 2; j++)
 			membw_ioctl_perf_event_ioc_reset_enable(imc, j);
 	}
@@ -326,6 +333,24 @@ static int get_mem_bw_imc(int cpu_no, char *bw_report, float *bw_imc)
 		for (j = 0; j < 2; j++)
 			membw_ioctl_perf_event_ioc_disable(imc, j);
 	}
+}
+
+/*
+ * get_mem_bw_imc - Memory band width as reported by iMC counters
+ * @bw_report:		Bandwidth report type (reads, writes)
+ *
+ * Memory B/W utilized by a process on a socket can be calculated using
+ * iMC counters. Perf events are used to read these counters.
+ *
+ * Return: = 0 on success. < 0 on failure.
+ */
+static int get_mem_bw_imc(char *bw_report, float *bw_imc)
+{
+	float reads, writes, of_mul_read, of_mul_write;
+	int imc, j;
+
+	/* Start all iMC counters to log values (both read and write) */
+	reads = 0, writes = 0, of_mul_read = 1, of_mul_write = 1;
 
 	/*
 	 * Get results which are stored in struct type imc_counter_config
@@ -593,10 +618,9 @@ static void initialize_llc_occu_resctrl(const char *ctrlgrp, const char *mongrp,
 }
 
 static int measure_vals(const struct user_params *uparams,
-			struct resctrl_val_param *param,
-			unsigned long *bw_resc_start)
+			struct resctrl_val_param *param)
 {
-	unsigned long bw_resc, bw_resc_end;
+	unsigned long bw_resc, bw_resc_start, bw_resc_end;
 	float bw_imc;
 	int ret;
 
@@ -607,22 +631,27 @@ static int measure_vals(const struct user_params *uparams,
 	 * Compare the two values to validate resctrl value.
 	 * It takes 1sec to measure the data.
 	 */
-	ret = get_mem_bw_imc(uparams->cpu, param->bw_report, &bw_imc);
+	ret = perf_open_imc_mem_bw(uparams->cpu);
 	if (ret < 0)
 		return ret;
 
+	ret = get_mem_bw_resctrl(&bw_resc_start);
+	if (ret < 0)
+		return ret;
+
+	do_imc_mem_bw_test();
+
 	ret = get_mem_bw_resctrl(&bw_resc_end);
 	if (ret < 0)
 		return ret;
 
-	bw_resc = (bw_resc_end - *bw_resc_start) / MB;
-	ret = print_results_bw(param->filename, bm_pid, bw_imc, bw_resc);
-	if (ret)
+	ret = get_mem_bw_imc(param->bw_report, &bw_imc);
+	if (ret < 0)
 		return ret;
 
-	*bw_resc_start = bw_resc_end;
+	bw_resc = (bw_resc_end - bw_resc_start) / MB;
 
-	return 0;
+	return print_results_bw(param->filename, bm_pid, bw_imc, bw_resc);
 }
 
 /*
@@ -696,7 +725,6 @@ int resctrl_val(const struct resctrl_test *test,
 		struct resctrl_val_param *param)
 {
 	char *resctrl_val = param->resctrl_val;
-	unsigned long bw_resc_start = 0;
 	struct sigaction sigact;
 	int ret = 0, pipefd[2];
 	char pipe_message = 0;
@@ -838,7 +866,7 @@ int resctrl_val(const struct resctrl_test *test,
 
 		if (!strncmp(resctrl_val, MBM_STR, sizeof(MBM_STR)) ||
 		    !strncmp(resctrl_val, MBA_STR, sizeof(MBA_STR))) {
-			ret = measure_vals(uparams, param, &bw_resc_start);
+			ret = measure_vals(uparams, param);
 			if (ret)
 				break;
 		} else if (!strncmp(resctrl_val, CMT_STR, sizeof(CMT_STR))) {
-- 
2.39.2


  parent reply	other threads:[~2024-03-11 13:53 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-11 13:52 [PATCH v2 00/13] selftests/resctrl: resctrl_val() related cleanups & improvements Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 01/13] selftests/resctrl: Convert get_mem_bw_imc() fd close to for loop Ilpo Järvinen
2024-03-20  4:50   ` Reinette Chatre
2024-03-22 11:59     ` Ilpo Järvinen
2024-03-22 12:00       ` Ilpo Järvinen
2024-03-11 13:52 ` Ilpo Järvinen [this message]
2024-03-20  4:53   ` [PATCH v2 02/13] selftests/resctrl: Calculate resctrl FS derived mem bw over sleep(1) only Reinette Chatre
2024-03-22 12:11     ` Ilpo Järvinen
2024-03-22 17:44       ` Reinette Chatre
2024-03-25 13:08         ` Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 03/13] selftests/resctrl: Consolidate get_domain_id() into resctrl_val() Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 04/13] selftests/resctrl: Use correct type for pids Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 05/13] selftests/resctrl: Cleanup bm_pid and ppid usage & limit scope Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 06/13] selftests/resctrl: Rename measure_vals() to measure_mem_bw_vals() & document Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 07/13] selftests/resctrl: Add ->measure() callback to resctrl_val_param Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 08/13] selftests/resctrl: Add ->init() callback into resctrl_val_param Ilpo Järvinen
2024-03-13 10:15   ` Maciej Wieczor-Retman
2024-03-13 10:28     ` Maciej Wieczor-Retman
2024-03-13 11:37       ` Ilpo Järvinen
2024-03-13 13:53         ` Maciej Wieczor-Retman
2024-03-13 13:59           ` Ilpo Järvinen
2024-03-14 16:07   ` Maciej Wieczor-Retman
2024-03-14 16:09     ` Ilpo Järvinen
2024-03-20  4:58   ` Reinette Chatre
2024-03-22 12:22     ` Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 09/13] selftests/resctrl: Simplify bandwidth report type handling Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 10/13] selftests/resctrl: Make some strings passed to resctrlfs functions const Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 11/13] selftests/resctrl: Convert ctrlgrp & mongrp to pointers Ilpo Järvinen
2024-03-20 15:20   ` Reinette Chatre
2024-03-22 12:30     ` Ilpo Järvinen
2024-03-22 17:44       ` Reinette Chatre
2024-03-25 13:14         ` Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 12/13] selftests/resctrl: Remove mongrp from MBA test Ilpo Järvinen
2024-03-11 13:52 ` [PATCH v2 13/13] selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl() Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240311135230.7007-3-ilpo.jarvinen@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=babu.moger@amd.com \
    --cc=fenghua.yu@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=maciej.wieczor-retman@intel.com \
    --cc=reinette.chatre@intel.com \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox