From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Antoine Tenart <atenart@kernel.org>,
UNGLinuxDriver@microchip.com, Hongbo Wang <hongbo.wang@nxp.com>,
Xiaoliang Yang <xiaoliang.yang_1@nxp.com>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Colin Foster <colin.foster@in-advantage.com>,
Horatiu Vultur <horatiu.vultur@microchip.com>,
Hangbin Liu <liuhangbin@gmail.com>,
Petr Machata <petrm@nvidia.com>, Ido Schimmel <idosch@nvidia.com>,
linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net 02/14] selftests: net: local_termination: parameterize sending interface
Date: Thu, 15 Aug 2024 03:06:55 +0300 [thread overview]
Message-ID: <20240815000707.2006121-3-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20240815000707.2006121-1-vladimir.oltean@nxp.com>
In future changes we will want to subject the DUT, $h2, to additional
VLAN-tagged traffic. For that, we need to run the tests using $h1.100 as
a sending interface, rather than the currently hardcoded $h1.
Add a parameter to run_test() and modify its 2 callers to explicitly
pass $h1, as was implicit before.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
.../net/forwarding/local_termination.sh | 39 ++++++++++---------
1 file changed, 20 insertions(+), 19 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/local_termination.sh b/tools/testing/selftests/net/forwarding/local_termination.sh
index 36f3d577d0be..92f0e242d119 100755
--- a/tools/testing/selftests/net/forwarding/local_termination.sh
+++ b/tools/testing/selftests/net/forwarding/local_termination.sh
@@ -104,44 +104,45 @@ mc_route_destroy()
run_test()
{
- local rcv_if_name=$1
- local smac=$(mac_get $h1)
+ local send_if_name=$1; shift
+ local rcv_if_name=$1; shift
+ local smac=$(mac_get $send_if_name)
local rcv_dmac=$(mac_get $rcv_if_name)
tcpdump_start $rcv_if_name
- mc_route_prepare $h1
+ mc_route_prepare $send_if_name
mc_route_prepare $rcv_if_name
- send_uc_ipv4 $h1 $rcv_dmac
- send_uc_ipv4 $h1 $MACVLAN_ADDR
- send_uc_ipv4 $h1 $UNKNOWN_UC_ADDR1
+ send_uc_ipv4 $send_if_name $rcv_dmac
+ send_uc_ipv4 $send_if_name $MACVLAN_ADDR
+ send_uc_ipv4 $send_if_name $UNKNOWN_UC_ADDR1
ip link set dev $rcv_if_name promisc on
- send_uc_ipv4 $h1 $UNKNOWN_UC_ADDR2
- mc_send $h1 $UNKNOWN_IPV4_MC_ADDR2
- mc_send $h1 $UNKNOWN_IPV6_MC_ADDR2
+ send_uc_ipv4 $send_if_name $UNKNOWN_UC_ADDR2
+ mc_send $send_if_name $UNKNOWN_IPV4_MC_ADDR2
+ mc_send $send_if_name $UNKNOWN_IPV6_MC_ADDR2
ip link set dev $rcv_if_name promisc off
mc_join $rcv_if_name $JOINED_IPV4_MC_ADDR
- mc_send $h1 $JOINED_IPV4_MC_ADDR
+ mc_send $send_if_name $JOINED_IPV4_MC_ADDR
mc_leave
mc_join $rcv_if_name $JOINED_IPV6_MC_ADDR
- mc_send $h1 $JOINED_IPV6_MC_ADDR
+ mc_send $send_if_name $JOINED_IPV6_MC_ADDR
mc_leave
- mc_send $h1 $UNKNOWN_IPV4_MC_ADDR1
- mc_send $h1 $UNKNOWN_IPV6_MC_ADDR1
+ mc_send $send_if_name $UNKNOWN_IPV4_MC_ADDR1
+ mc_send $send_if_name $UNKNOWN_IPV6_MC_ADDR1
ip link set dev $rcv_if_name allmulticast on
- send_uc_ipv4 $h1 $UNKNOWN_UC_ADDR3
- mc_send $h1 $UNKNOWN_IPV4_MC_ADDR3
- mc_send $h1 $UNKNOWN_IPV6_MC_ADDR3
+ send_uc_ipv4 $send_if_name $UNKNOWN_UC_ADDR3
+ mc_send $send_if_name $UNKNOWN_IPV4_MC_ADDR3
+ mc_send $send_if_name $UNKNOWN_IPV6_MC_ADDR3
ip link set dev $rcv_if_name allmulticast off
mc_route_destroy $rcv_if_name
- mc_route_destroy $h1
+ mc_route_destroy $send_if_name
sleep 1
@@ -267,7 +268,7 @@ standalone()
h2_create
macvlan_create $h2
- run_test $h2
+ run_test $h1 $h2
macvlan_destroy
h2_destroy
@@ -280,7 +281,7 @@ bridge()
bridge_create
macvlan_create br0
- run_test br0
+ run_test $h1 br0
macvlan_destroy
bridge_destroy
--
2.34.1
next prev parent reply other threads:[~2024-08-15 0:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-15 0:06 [PATCH net 00/14] VLAN fixes for Ocelot driver Vladimir Oltean
2024-08-15 0:06 ` [PATCH net 01/14] selftests: net: local_termination: refactor macvlan creation/deletion Vladimir Oltean
2024-08-15 0:06 ` Vladimir Oltean [this message]
2024-08-15 0:06 ` [PATCH net 03/14] selftests: net: local_termination: parameterize test name Vladimir Oltean
2024-08-15 0:06 ` [PATCH net 04/14] selftests: net: local_termination: add one more test for VLAN-aware bridges Vladimir Oltean
2024-08-15 0:06 ` [PATCH net 05/14] selftests: net: local_termination: introduce new tests which capture VLAN behavior Vladimir Oltean
2024-08-15 0:06 ` [PATCH net 06/14] selftests: net: local_termination: don't use xfail_on_veth() Vladimir Oltean
2024-08-15 0:07 ` [PATCH net 07/14] selftests: net: local_termination: add PTP frames to the mix Vladimir Oltean
2024-08-15 0:07 ` [PATCH net 08/14] selftests: net: bridge_vlan_aware: test that other TPIDs are seen as untagged Vladimir Oltean
2024-08-15 9:11 ` Ido Schimmel
2024-08-15 9:38 ` Vladimir Oltean
2024-08-15 0:07 ` [PATCH net 09/14] net: mscc: ocelot: use ocelot_xmit_get_vlan_info() also for FDMA and register injection Vladimir Oltean
2024-08-15 0:07 ` [PATCH net 10/14] net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q" Vladimir Oltean
2024-08-15 0:07 ` [PATCH net 11/14] net: mscc: ocelot: serialize access to the injection/extraction groups Vladimir Oltean
2024-08-15 0:07 ` [PATCH net 12/14] net: dsa: provide a software untagging function on RX for VLAN-aware bridges Vladimir Oltean
2024-08-15 0:07 ` [PATCH net 13/14] net: dsa: felix: fix VLAN tag loss on CPU reception with ocelot-8021q Vladimir Oltean
2024-08-15 0:07 ` [PATCH net 14/14] net: mscc: ocelot: treat 802.1ad tagged traffic as 802.1Q-untagged Vladimir Oltean
2024-08-16 9:10 ` [PATCH net 00/14] VLAN fixes for Ocelot driver patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240815000707.2006121-3-vladimir.oltean@nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=claudiu.manoil@nxp.com \
--cc=colin.foster@in-advantage.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=hongbo.wang@nxp.com \
--cc=horatiu.vultur@microchip.com \
--cc=idosch@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=liuhangbin@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=petrm@nvidia.com \
--cc=xiaoliang.yang_1@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox