From: Daniel Zahka <daniel.zahka@gmail.com>
To: Jakub Kicinski <kuba@kernel.org>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>, Simon Horman <horms@kernel.org>,
Shuah Khan <shuah@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>,
Breno Leitao <leitao@debian.org>, Petr Machata <petrm@nvidia.com>,
Yuyang Huang <yuyanghuang@google.com>,
Xiao Liang <shaw.leon@gmail.com>,
Carolina Jubran <cjubran@nvidia.com>,
Donald Hunter <donald.hunter@gmail.com>,
netdev@vger.kernel.org, linux-kselftest@vger.kernel.org
Subject: [PATCH net-next v2 0/8] psp: add a kselftest suite and netdevsim implementation
Date: Thu, 25 Sep 2025 14:16:36 -0700 [thread overview]
Message-ID: <20250925211647.3450332-1-daniel.zahka@gmail.com> (raw)
Add a basic test suite for drivers that support PSP. Also, add a PSP
implementation in the netdevsim driver.
The netdevsim implementation does encapsulation and decapsulation of
PSP packets, but no crypto.
The tests cover the basic usage of the uapi, and demonstrate key
exchange and connection setup. The tests and netdevsim support IPv4
and IPv6. Here is an example run on a system with a CX7 NIC.
TAP version 13
1..28
ok 1 psp.data_basic_send_v0_ip4
ok 2 psp.data_basic_send_v0_ip6
ok 3 psp.data_basic_send_v1_ip4
ok 4 psp.data_basic_send_v1_ip6
ok 5 psp.data_basic_send_v2_ip4 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-128')
ok 6 psp.data_basic_send_v2_ip6 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-128')
ok 7 psp.data_basic_send_v3_ip4 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-256')
ok 8 psp.data_basic_send_v3_ip6 # SKIP ('PSP version not supported', 'hdr0-aes-gmac-256')
ok 9 psp.data_mss_adjust_ip4
ok 10 psp.data_mss_adjust_ip6
ok 11 psp.dev_list_devices
ok 12 psp.dev_get_device
ok 13 psp.dev_get_device_bad
ok 14 psp.dev_rotate
ok 15 psp.dev_rotate_spi
ok 16 psp.assoc_basic
ok 17 psp.assoc_bad_dev
ok 18 psp.assoc_sk_only_conn
ok 19 psp.assoc_sk_only_mismatch
ok 20 psp.assoc_sk_only_mismatch_tx
ok 21 psp.assoc_sk_only_unconn
ok 22 psp.assoc_version_mismatch
ok 23 psp.assoc_twice
ok 24 psp.data_send_bad_key
ok 25 psp.data_send_disconnect
ok 26 psp.data_stale_key
ok 27 psp.removal_device_rx # XFAIL Test only works on netdevsim
ok 28 psp.removal_device_bi # XFAIL Test only works on netdevsim
# Totals: pass:22 fail:0 xfail:2 xpass:0 skip:4 error:0
#
# Responder logs (0):
# STDERR:
# Set PSP enable on device 1 to 0x3
# Set PSP enable on device 1 to 0x0
CHANGES:
v2:
- fix pylint warnings
- insert CONFIG_INET_PSP in alphebetical order
- use branch to skip all tests
- fix compilation error when CONFIG_INET_PSP is not set
v1: https://lore.kernel.org/netdev/20250924194959.2845473-1-daniel.zahka@gmail.com/
Jakub Kicinski (8):
netdevsim: a basic test PSP implementation
selftests: drv-net: base device access API test
selftests: drv-net: add PSP responder
selftests: drv-net: psp: add basic data transfer and key rotation
tests
selftests: drv-net: psp: add association tests
selftests: drv-net: psp: add connection breaking tests
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
selftests: drv-net: psp: add tests for destroying devices
drivers/net/netdevsim/Makefile | 4 +
drivers/net/netdevsim/netdev.c | 55 +-
drivers/net/netdevsim/netdevsim.h | 33 +
drivers/net/netdevsim/psp.c | 234 +++++++
net/core/skbuff.c | 1 +
.../testing/selftests/drivers/net/.gitignore | 1 +
tools/testing/selftests/drivers/net/Makefile | 10 +
tools/testing/selftests/drivers/net/config | 1 +
.../drivers/net/hw/lib/py/__init__.py | 4 +-
.../selftests/drivers/net/lib/py/__init__.py | 4 +-
.../selftests/drivers/net/lib/py/env.py | 5 +
tools/testing/selftests/drivers/net/psp.py | 593 ++++++++++++++++++
.../selftests/drivers/net/psp_responder.c | 483 ++++++++++++++
.../testing/selftests/net/lib/py/__init__.py | 2 +-
tools/testing/selftests/net/lib/py/ksft.py | 10 +
tools/testing/selftests/net/lib/py/ynl.py | 5 +
16 files changed, 1432 insertions(+), 13 deletions(-)
create mode 100644 drivers/net/netdevsim/psp.c
create mode 100755 tools/testing/selftests/drivers/net/psp.py
create mode 100644 tools/testing/selftests/drivers/net/psp_responder.c
--
2.47.3
next reply other threads:[~2025-09-25 21:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-25 21:16 Daniel Zahka [this message]
2025-09-25 21:16 ` [PATCH net-next v2 1/8] netdevsim: a basic test PSP implementation Daniel Zahka
2025-09-25 21:16 ` [PATCH net-next v2 2/8] selftests: drv-net: base device access API test Daniel Zahka
2025-09-25 21:16 ` [PATCH net-next v2 3/8] selftests: drv-net: add PSP responder Daniel Zahka
2025-09-25 21:16 ` [PATCH net-next v2 4/8] selftests: drv-net: psp: add basic data transfer and key rotation tests Daniel Zahka
2025-09-25 21:16 ` [PATCH net-next v2 5/8] selftests: drv-net: psp: add association tests Daniel Zahka
2025-09-25 21:16 ` [PATCH net-next v2 6/8] selftests: drv-net: psp: add connection breaking tests Daniel Zahka
2025-09-25 21:16 ` [PATCH net-next v2 7/8] selftests: drv-net: psp: add test for auto-adjusting TCP MSS Daniel Zahka
2025-09-25 21:16 ` [PATCH net-next v2 8/8] selftests: drv-net: psp: add tests for destroying devices Daniel Zahka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250925211647.3450332-1-daniel.zahka@gmail.com \
--to=daniel.zahka@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=cjubran@nvidia.com \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=leitao@debian.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=petrm@nvidia.com \
--cc=shaw.leon@gmail.com \
--cc=shuah@kernel.org \
--cc=willemb@google.com \
--cc=yuyanghuang@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox