From: Jiayuan Chen <jiayuan.chen@linux.dev>
To: bpf@vger.kernel.org
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>,
Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Andrii Nakryiko <andrii@kernel.org>,
Eduard Zingerman <eddyz87@gmail.com>,
Kumar Kartikeya Dwivedi <memxor@gmail.com>,
Martin KaFai Lau <martin.lau@linux.dev>,
Song Liu <song@kernel.org>,
Yonghong Song <yonghong.song@linux.dev>,
Jiri Olsa <jolsa@kernel.org>,
Emil Tsalapatis <emil@etsalapatis.com>,
John Fastabend <john.fastabend@gmail.com>,
Shuah Khan <shuah@kernel.org>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Clark Williams <clrkwllms@kernel.org>,
Steven Rostedt <rostedt@goodmis.org>,
linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org,
linux-rt-devel@lists.linux.dev
Subject: [PATCH bpf-next 3/3] selftests/bpf: Add a test for arena fault-in under memory.max
Date: Mon, 27 Jul 2026 14:24:14 +0800 [thread overview]
Message-ID: <20260727062521.376231-4-jiayuan.chen@linux.dev> (raw)
In-Reply-To: <20260727062521.376231-1-jiayuan.chen@linux.dev>
A child joins a memcg capped at 64M and faults an arena in until it runs
out of the budget. Without the kernel fix the child dies with SIGSEGV on
a valid arena address; with it, the child is killed by the memcg OOM
killer.
With the fix:
serial_test_arena_memcg:PASS:child killed by signal
serial_test_arena_memcg:PASS:not killed by SIGSEGV
#5 arena_memcg:OK
# dmesg
arena_vm_fault+0x655/0xa90
Memory cgroup out of memory: Killed process 512, file-rss:67920kB
Without the fix:
serial_test_arena_memcg:PASS:child killed by signal
serial_test_arena_memcg:FAIL:not killed by SIGSEGV: actual 11
#5 arena_memcg:FAIL
# dmesg
test_progs[508]: segfault at 100004025000 ...
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
---
.../selftests/bpf/prog_tests/arena_memcg.c | 158 ++++++++++++++++++
.../testing/selftests/bpf/progs/arena_memcg.c | 24 +++
2 files changed, 182 insertions(+)
create mode 100644 tools/testing/selftests/bpf/prog_tests/arena_memcg.c
create mode 100644 tools/testing/selftests/bpf/progs/arena_memcg.c
diff --git a/tools/testing/selftests/bpf/prog_tests/arena_memcg.c b/tools/testing/selftests/bpf/prog_tests/arena_memcg.c
new file mode 100644
index 000000000000..9665946fa29e
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/arena_memcg.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <test_progs.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <sys/mman.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <sys/user.h>
+#ifndef PAGE_SIZE /* on some archs it comes in sys/user.h */
+#include <unistd.h>
+#define PAGE_SIZE getpagesize()
+#endif
+
+#include "cgroup_helpers.h"
+#include "arena_memcg.skel.h"
+
+#define CG_PATH "/arena_memcg"
+
+/* Budget the arena gets on top of whatever is already charged after load. */
+#define ARENA_BUDGET (64 * 1024 * 1024)
+
+/*
+ * cgroup_helpers builds paths from getpid(), but the work dir belongs to the
+ * process that set the environment up. The child references it through that
+ * pid, so build the path explicitly.
+ */
+static void cg_file_path(char *buf, size_t sz, pid_t owner, const char *file)
+{
+ snprintf(buf, sz, "/mnt/cgroup-test-work-dir%d%s/%s", owner, CG_PATH, file);
+}
+
+static long cg_read_ulong(pid_t owner, const char *file)
+{
+ char path[PATH_MAX], buf[64];
+ long val = -1;
+ FILE *f;
+
+ cg_file_path(path, sizeof(path), owner, file);
+ f = fopen(path, "r");
+ if (!f)
+ return -1;
+ if (fgets(buf, sizeof(buf), f))
+ val = strtol(buf, NULL, 10);
+ fclose(f);
+ return val;
+}
+
+static int cg_write(pid_t owner, const char *file, const char *val)
+{
+ char path[PATH_MAX];
+ int fd, len, ret = -1;
+
+ cg_file_path(path, sizeof(path), owner, file);
+ fd = open(path, O_WRONLY);
+ if (fd < 0)
+ return -1;
+ len = strlen(val);
+ if (write(fd, val, len) == len)
+ ret = 0;
+ close(fd);
+ return ret;
+}
+
+void serial_test_arena_memcg(void)
+{
+ int cgroup_fd = -1, status;
+ const long ps = PAGE_SIZE;
+ pid_t owner, pid;
+
+ if (setup_cgroup_environment())
+ return;
+ owner = getpid();
+
+ cgroup_fd = create_and_get_cgroup(CG_PATH);
+ if (!ASSERT_OK_FD(cgroup_fd, "create_and_get_cgroup"))
+ goto out;
+
+ /* No memory controller -> nothing to test. */
+ if (cg_read_ulong(owner, "memory.current") < 0) {
+ test__skip();
+ goto out;
+ }
+
+ pid = fork();
+ if (!ASSERT_GE(pid, 0, "fork"))
+ goto out;
+ if (pid == 0) {
+ struct arena_memcg *cskel;
+ __u32 i, npages;
+ char buf[32];
+ char *base;
+ size_t sz;
+ long cur;
+
+ /*
+ * Do everything from the child: the arena vma is VM_DONTCOPY so
+ * it would not survive fork(), only the child should be under the
+ * limit so that a memcg OOM cannot pick test_progs, and a map is
+ * charged to the memcg of the task that creates it - so join
+ * before load. Errors are reported to the parent through the exit
+ * code, since ASSERT_* in a forked child does not reach it.
+ */
+ snprintf(buf, sizeof(buf), "%d", getpid());
+ if (cg_write(owner, "cgroup.procs", buf))
+ _exit(2);
+
+ cskel = arena_memcg__open_and_load();
+ if (!cskel)
+ _exit(3);
+
+ base = bpf_map__initial_value(cskel->maps.arena, &sz);
+ if (!base)
+ _exit(4);
+ npages = bpf_map__max_entries(cskel->maps.arena);
+
+ /*
+ * Cap only now, after load: everything but the fault-in is
+ * charged, so the arena gets a fixed budget regardless of what
+ * the load itself cost, and the load can never hit the limit.
+ */
+ cur = cg_read_ulong(owner, "memory.current");
+ if (cur < 0)
+ _exit(5);
+ snprintf(buf, sizeof(buf), "%ld", cur + ARENA_BUDGET);
+ if (cg_write(owner, "memory.max", buf))
+ _exit(6);
+
+ for (i = 0; i < npages; i++)
+ base[(size_t)i * ps] = 1;
+ _exit(0);
+ }
+
+ if (!ASSERT_EQ(waitpid(pid, &status, 0), pid, "waitpid"))
+ goto out;
+
+ /* A non-zero exit means the child failed to set up; the code says where. */
+ if (WIFEXITED(status) && WEXITSTATUS(status)) {
+ ASSERT_OK(WEXITSTATUS(status), "child setup");
+ goto out;
+ }
+
+ /*
+ * Faulting a valid arena address until memory.max is hit must not look
+ * like an invalid access. Without the fix the fault path allocated with
+ * the non-blocking allocator, turned its -ENOMEM into VM_FAULT_SIGSEGV,
+ * and the child died with SIGSEGV on a valid address; now it is handled
+ * by the memcg OOM path and the child is killed by SIGKILL instead. A
+ * clean exit means the child failed to set up (see the exit codes).
+ */
+ if (!ASSERT_TRUE(WIFSIGNALED(status), "child killed by signal"))
+ goto out;
+ ASSERT_NEQ(WTERMSIG(status), SIGSEGV, "not killed by SIGSEGV");
+out:
+ if (cgroup_fd >= 0)
+ close(cgroup_fd);
+ cleanup_cgroup_environment();
+}
diff --git a/tools/testing/selftests/bpf/progs/arena_memcg.c b/tools/testing/selftests/bpf/progs/arena_memcg.c
new file mode 100644
index 000000000000..adecd9e8463e
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/arena_memcg.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <vmlinux.h>
+#include <bpf/bpf_helpers.h>
+#include "bpf_arena_common.h"
+
+struct {
+ __uint(type, BPF_MAP_TYPE_ARENA);
+ __uint(map_flags, BPF_F_MMAPABLE);
+ __uint(max_entries, 100000); /* number of pages */
+#ifdef __TARGET_ARCH_arm64
+ __ulong(map_extra, 0x1ull << 32); /* start of mmap() region */
+#else
+ __ulong(map_extra, 0x1ull << 44); /* start of mmap() region */
+#endif
+} arena SEC(".maps");
+
+SEC("syscall")
+int noop(void *ctx)
+{
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
--
2.43.0
prev parent reply other threads:[~2026-07-27 6:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 6:24 [PATCH bpf-next 0/3] bpf: arena: handle memory.max on fault-in with reclaim/OOM Jiayuan Chen
2026-07-27 6:24 ` [PATCH bpf-next 1/3] bpf: Add a sleepable page allocator for map memory Jiayuan Chen
2026-07-27 6:24 ` [PATCH bpf-next 2/3] bpf: arena: allocate the fault-in page outside the lock Jiayuan Chen
2026-07-27 7:10 ` bot+bpf-ci
2026-07-27 6:24 ` Jiayuan Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727062521.376231-4-jiayuan.chen@linux.dev \
--to=jiayuan.chen@linux.dev \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bigeasy@linutronix.de \
--cc=bpf@vger.kernel.org \
--cc=clrkwllms@kernel.org \
--cc=daniel@iogearbox.net \
--cc=eddyz87@gmail.com \
--cc=emil@etsalapatis.com \
--cc=john.fastabend@gmail.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-rt-devel@lists.linux.dev \
--cc=martin.lau@linux.dev \
--cc=memxor@gmail.com \
--cc=rostedt@goodmis.org \
--cc=shuah@kernel.org \
--cc=song@kernel.org \
--cc=yonghong.song@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox