[PATCH v3 1/2] selftests/net/openvswitch: add SCTP flow key test over IPv6

[Minxi Hou <houminxi@gmail.com>]

The merged SCTP test covers only IPv4. The SCTP branch of the IPv6
extractor (the proto=132 walk after parse_ipv6hdr) and the v6 side of
the SCTP netlink validation (match_validate() requires the sctp() key
whenever ipv6(proto=132) is matched) have no selftest coverage.

Add test_sctp_connect_v6 mirroring the v4 test: bare icmpv6() flows
forward NS/NA, and ipv6(proto=132),sctp(dst=4443)/sctp(src=4443)
flows gate the association in the same three phases (flows installed,
removed, reinstalled). After the association succeeds the test also
pushes a known payload across and waits for the listener to log it,
proving the datapath carries the association's traffic end to end,
not only its handshake. Skips when the sctp module is missing, socat
lacks SCTP support, or IPv6 is unavailable; an association or payload
failure with the flows installed fails the test.

Signed-off-by: Minxi Hou <houminxi@gmail.com>
---
 .../selftests/net/openvswitch/openvswitch.sh  | 95 +++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh
index a31f7fb6882d..0926e304ed88 100755
--- a/tools/testing/selftests/net/openvswitch/openvswitch.sh
+++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh
@@ -34,6 +34,7 @@ tests="
 	trunc					trunc: output truncation
 	icmpv6					icmpv6: ICMPv6 echo type match
 	sctp_connect_v4				sctp: SCTP flow key matching
+	sctp_connect_v6			sctp6: SCTP flow key matching over IPv6
 	psample					psample: Sampling packets with psample"
 
 info() {
@@ -700,6 +701,100 @@ test_sctp_connect_v4() {
 	return 0
 }
 
+# sctp_connect_v6 test
+# - sctp(dst=4443) matches client-to-server INIT
+# - sctp(src=4443) matches server-to-client INIT-ACK
+# - icmpv6 NS/NA flows forward neighbour discovery
+# - remove flows and verify connection fails, reinstall and recover
+test_sctp_connect_v6() {
+	local t="test_sctp_connect_v6"
+	local v6="eth_type(0x86dd),ipv6(proto=132)"
+	local payload="SCTP6_DATA_OK"
+	local rxfile="${ovs_base}/${t}/sctp-rx.txt"
+
+	modprobe -q sctp 2>/dev/null || return "$ksft_skip"
+	socat -V 2>&1 | grep -q "define WITH_SCTP" || return "$ksft_skip"
+	[ -e /proc/sys/net/ipv6 ] || return "$ksft_skip"
+
+	sbx_add "$t" || return $?
+	ovs_add_dp "$t" sctp6 || return 1
+
+	info "create namespaces"
+	for ns in client server; do
+		ovs_add_netns_and_veths "$t" "sctp6" "$ns" \
+		    "${ns:0:1}0" "${ns:0:1}1" || return 1
+	done
+
+	ip netns exec client ip addr add fd00::1/64 dev c1 nodad
+	ip netns exec client ip link set c1 up
+	ip netns exec server ip addr add fd00::2/64 dev s1 nodad
+	ip netns exec server ip link set s1 up
+
+	# NS/NA forwarding
+	ovs_add_flow "$t" sctp6 \
+	    'in_port(1),eth(),eth_type(0x86dd),ipv6(proto=58),icmpv6()' \
+	    '2' || return 1
+	ovs_add_flow "$t" sctp6 \
+	    'in_port(2),eth(),eth_type(0x86dd),ipv6(proto=58),icmpv6()' \
+	    '1' || return 1
+
+	# SCTP port matching: dst for request, src for reply
+	ovs_add_flow "$t" sctp6 \
+	    "in_port(1),eth(),$v6,sctp(dst=4443)" \
+	    '2' || return 1
+	ovs_add_flow "$t" sctp6 \
+	    "in_port(2),eth(),$v6,sctp(src=4443)" \
+	    '1' || return 1
+
+	ovs_netns_spawn_daemon "$t" "server" \
+	    socat -u -t 1 SCTP6-LISTEN:4443,fork \
+	    OPEN:"$rxfile",creat,append
+	ovs_wait sctp_eps_has server 4443 || return 1
+
+	info "verify SCTP association with port-keyed flows"
+	ovs_sbx "$t" ip netns exec client \
+	    timeout 3 socat -u STDIN "SCTP6-CONNECT:[fd00::2]:4443" </dev/null \
+	    || return 1
+
+	info "verify SCTP DATA chunk crosses the datapath"
+	ovs_sbx "$t" ip netns exec client \
+	    timeout 3 socat -u STDIN "SCTP6-CONNECT:[fd00::2]:4443" \
+	    <<< "$payload" || return 1
+	ovs_wait grep -q "$payload" "$rxfile" \
+	    || { info "server did not receive SCTP DATA payload"
+	         return 1; }
+
+	ovs_del_flows "$t" sctp6
+
+	info "verify connection fails without flows"
+	ovs_add_flow "$t" sctp6 \
+	    'in_port(1),eth(),eth_type(0x86dd),ipv6(proto=58),icmpv6()' \
+	    '2' || return 1
+	ovs_add_flow "$t" sctp6 \
+	    'in_port(2),eth(),eth_type(0x86dd),ipv6(proto=58),icmpv6()' \
+	    '1' || return 1
+
+	ovs_sbx "$t" ip netns exec client \
+	    timeout 3 socat -u STDIN "SCTP6-CONNECT:[fd00::2]:4443" </dev/null \
+	    >/dev/null 2>&1 \
+	    && { info "connection should fail without flows"
+	         return 1; }
+
+	info "reinstall flows and verify recovery"
+	ovs_add_flow "$t" sctp6 \
+	    "in_port(1),eth(),$v6,sctp(dst=4443)" \
+	    '2' || return 1
+	ovs_add_flow "$t" sctp6 \
+	    "in_port(2),eth(),$v6,sctp(src=4443)" \
+	    '1' || return 1
+
+	ovs_sbx "$t" ip netns exec client \
+	    timeout 3 socat -u STDIN "SCTP6-CONNECT:[fd00::2]:4443" </dev/null \
+	    || return 1
+
+	return 0
+}
+
 # psample test
 # - use psample to observe packets
 test_psample() {
-- 
2.55.0