[PATCH net-next v5 2/2] selftests/net/openvswitch: add SCTP flow key test across conntrack NAT

[Minxi Hou <houminxi@gmail.com>]

After conntrack NAT rewrites a packet, OVS refreshes the cached flow
key in ovs_nat_update_key(), which has a per-protocol branch for the
L4 ports (UDP/TCP/SCTP, conntrack.c). Address-only NAT cannot tell a
working SCTP branch from a missing one: the ports survive unchanged
either way, so a post-recirc match on the original port stays green
even with the branch deleted. The suite's NAT coverage drives TCP
over nc, and the merged SCTP test has no conntrack in the path, so
the SCTP branch goes unexercised.

Add test_sctp_nat_connect_v4: untracked client traffic to
192.168.0.20:4443 hits ct(commit,nat(dst=172.31.110.20:5555)),recirc,
and the post-recirc flows match the translated tuple,
ipv4(dst=172.31.110.20),sctp(dst=5555). Reply traffic is matched on
the restored original tuple, sctp(src=4443). With the SCTP branch
broken the translated port never reaches the key, no post-recirc
flow matches, and the association fails. The probe flow uses the
same ct+nat action as the real flows, so a kernel without
CONFIG_NF_NAT rejects it at flow-add time and the test skips instead
of failing. The config fragment sets CONFIG_NETFILTER_ADVANCED=y so
CONFIG_NF_CT_PROTO_SCTP is visible, CONFIG_NF_CT_PROTO_SCTP=y, and
CONFIG_NF_NAT=m so the reference build actually has those pieces.
After the association succeeds the test pushes a known payload
across and waits for the listener to log it.

Signed-off-by: Minxi Hou <houminxi@gmail.com>
---
 .../testing/selftests/net/openvswitch/config  |  3 +
 .../selftests/net/openvswitch/openvswitch.sh  | 93 +++++++++++++++++++
 2 files changed, 96 insertions(+)

diff --git a/tools/testing/selftests/net/openvswitch/config b/tools/testing/selftests/net/openvswitch/config
index a825e0b5c88e..15685d242813 100644
--- a/tools/testing/selftests/net/openvswitch/config
+++ b/tools/testing/selftests/net/openvswitch/config
@@ -3,10 +3,13 @@ CONFIG_INET_DIAG=y
 CONFIG_IP_SCTP=y
 CONFIG_IPV6=y
 CONFIG_NETFILTER=y
+CONFIG_NETFILTER_ADVANCED=y
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPGRE_DEMUX=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_OVS=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_NAT=m
 CONFIG_OPENVSWITCH=m
 CONFIG_PSAMPLE=m
 CONFIG_VETH=y
diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh
index aa84fafc3201..21444657a040 100755
--- a/tools/testing/selftests/net/openvswitch/openvswitch.sh
+++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh
@@ -35,6 +35,7 @@ tests="
 	icmpv6					icmpv6: ICMPv6 echo type match
 	sctp_connect_v4				sctp: SCTP flow key matching
 	sctp_connect_v6				sctp6: SCTP flow keys over IPv6
+	sctp_nat_connect_v4			sctpnat4: SCTP NAT translation
 	psample					psample: Sampling packets with psample"
 
 info() {
@@ -1200,6 +1201,98 @@ test_nat_connect_v4 () {
 	return 0
 }
 
+# sctp_nat_connect_v4 test
+#  - SCTP association crosses a ct(commit,nat(dst=ip:port)) DNAT
+#  - post-recirc flows match the translated address and port, so the
+#    SCTP branch of the post-NAT flow key update is load-bearing
+test_sctp_nat_connect_v4 () {
+	local t="test_sctp_nat_connect_v4"
+	local payload="SCTP_NAT_DATA_OK"
+	local rxfile="${ovs_base}/${t}/sctp-rx.txt"
+
+	modprobe -q sctp 2>/dev/null || return "$ksft_skip"
+	socat -V 2>&1 | grep -q "define WITH_SCTP" || return "$ksft_skip"
+	# SCTP conntrack is compiled into nf_conntrack.ko, so check that
+	# loading it actually exposed the SCTP conntrack sysctls.
+	modprobe -q nf_conntrack 2>/dev/null || return "$ksft_skip"
+	[ -e /proc/sys/net/netfilter/nf_conntrack_sctp_timeout_established ] \
+	    || { info "no SCTP conntrack support - skipping"
+	         return "$ksft_skip"; }
+
+	sbx_add "test_sctp_nat_connect_v4" || return $?
+
+	ovs_add_dp "test_sctp_nat_connect_v4" sctpnat4 || return 1
+	info "create namespaces"
+	for ns in client server; do
+		ovs_add_netns_and_veths "test_sctp_nat_connect_v4" "sctpnat4" \
+		    "$ns" "${ns:0:1}0" "${ns:0:1}1" || return 1
+	done
+
+	ip netns exec client ip addr add 172.31.110.10/24 dev c1
+	ip netns exec client ip link set c1 up
+	ip netns exec server ip addr add 172.31.110.20/24 dev s1
+	ip netns exec server ip link set s1 up
+
+	ip netns exec client ip route add default via 172.31.110.20
+
+	# Check if the ct and nat actions can be configured.
+	ovs_add_flow "test_sctp_nat_connect_v4" sctpnat4 \
+		'in_port(1),eth(),eth_type(0x0800),ipv4()' \
+		'ct(commit,nat(dst=172.31.110.20:5555)),recirc(0x1)' \
+		&> /dev/null
+	if [ $? == 1 ]; then
+		info "no support for ct/nat actions - skipping"
+		ovs_exit_sig
+		return $ksft_skip
+	fi
+
+	ovs_del_flows "test_sctp_nat_connect_v4" sctpnat4
+
+	ovs_add_flow "test_sctp_nat_connect_v4" sctpnat4 \
+		'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1
+	ovs_add_flow "test_sctp_nat_connect_v4" sctpnat4 \
+		'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1
+	ovs_add_flow "test_sctp_nat_connect_v4" sctpnat4 \
+		"ct_state(-trk),in_port(1),eth(),eth_type(0x0800),"\
+"ipv4(dst=192.168.0.20)" \
+		"ct(commit,nat(dst=172.31.110.20:5555)),recirc(0x1)" || return 1
+	ovs_add_flow "test_sctp_nat_connect_v4" sctpnat4 \
+		"ct_state(-trk),in_port(2),eth(),eth_type(0x0800),ipv4()" \
+		"ct(commit,nat),recirc(0x2)" || return 1
+
+	ovs_add_flow "test_sctp_nat_connect_v4" sctpnat4 \
+		"recirc_id(0x1),ct_state(+trk-inv),in_port(1),eth(),"\
+"eth_type(0x0800),ipv4(dst=172.31.110.20,proto=132),"\
+"sctp(dst=5555)" \
+		"2" || return 1
+	ovs_add_flow "test_sctp_nat_connect_v4" sctpnat4 \
+		"recirc_id(0x2),ct_state(+trk-inv),in_port(2),eth(),"\
+"eth_type(0x0800),ipv4(src=192.168.0.20,proto=132),"\
+"sctp(src=4443)" \
+		"1" || return 1
+
+	ovs_netns_spawn_daemon "test_sctp_nat_connect_v4" "server" \
+		socat -u -t 1 SCTP4-LISTEN:5555,fork \
+		OPEN:"$rxfile",creat,append
+	ovs_wait sctp_eps_has server 5555 || return 1
+
+	info "verify SCTP association across NAT"
+	ovs_sbx "test_sctp_nat_connect_v4" ip netns exec client \
+	    timeout 3 socat -u STDIN "SCTP4-CONNECT:192.168.0.20:4443" \
+	    </dev/null || return 1
+
+	info "verify SCTP DATA chunk crosses NAT"
+	ovs_sbx "test_sctp_nat_connect_v4" ip netns exec client \
+	    timeout 3 socat -u STDIN "SCTP4-CONNECT:192.168.0.20:4443" \
+	    <<< "$payload" || return 1
+	ovs_wait grep -q "$payload" "$rxfile" \
+	    || { info "server did not receive SCTP DATA payload"
+	         return 1; }
+
+	info "done..."
+	return 0
+}
+
 # nat_related_v4 test
 #  - client->server ip packets go via SNAT
 #  - client solicits ICMP destination unreachable packet from server
-- 
2.55.0