From: Rustam Mustafin <rmustafin@cloudlinux.com>
To: Peter Huewe <peterhuewe@gmx.de>, Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>, Shuah Khan <shuah@kernel.org>,
Jaewon Yang <yong010301@gmail.com>,
linux-integrity@vger.kernel.org, linux-kselftest@vger.kernel.org,
linux-kernel@vger.kernel.org,
Rustam Mustafin <rmustafin@cloudlinux.com>
Subject: [RFC PATCH 1/1] tpm: Do not allow io_uring for /dev/tpm0 and /dev/tpmrm0
Date: Fri, 20 Nov 2026 21:21:16 +0700 [thread overview]
Message-ID: <20261120142116.1630010-2-rmustafin@cloudlinux.com> (raw)
In-Reply-To: <20261120142116.1630010-1-rmustafin@cloudlinux.com>
Add tpm_common_read_iter() and tpm_common_write_iter(), which fail
io_uring and AIO requests with -EIO. read() and write() are not
affected, as the VFS still calls ->read() and ->write() for them.
readv() and writev() now reach the new callbacks instead of the VFS
loop over ->read() and ->write(), so the callbacks keep that loop and
call tpm_common_read() and tpm_common_write() once per iovec.
Update the tpm_uring kselftest to expect -EIO, and check that the
rejected request leaves the whole response for the following read().
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/av23L5HBpy2gbm3m@kernel.org
Signed-off-by: Rustam Mustafin <rmustafin@cloudlinux.com>
---
drivers/char/tpm/tpm-dev-common.c | 72 ++++++++++++++++++++++++
drivers/char/tpm/tpm-dev.c | 4 ++
drivers/char/tpm/tpm-dev.h | 4 ++
drivers/char/tpm/tpmrm-dev.c | 4 ++
tools/testing/selftests/tpm2/tpm_uring.c | 14 ++---
5 files changed, 91 insertions(+), 7 deletions(-)
diff --git a/drivers/char/tpm/tpm-dev-common.c b/drivers/char/tpm/tpm-dev-common.c
index 553fc6aca94d..e40a251315f3 100644
--- a/drivers/char/tpm/tpm-dev-common.c
+++ b/drivers/char/tpm/tpm-dev-common.c
@@ -13,8 +13,10 @@
* Device file system interface to the TPM
*/
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/uio.h>
#include <linux/workqueue.h>
#include "tpm.h"
#include "tpm-dev.h"
@@ -253,6 +255,76 @@ ssize_t tpm_common_write(struct file *file, const char __user *buf,
return ret;
}
+#ifdef CONFIG_IO_URING
+/*
+ * Reject io_uring and AIO. IORING_OP_READ_MULTISHOT requests use a
+ * synchronous kiocb, so also check for NOWAIT attempts and io-wq workers.
+ */
+static bool tpm_iter_is_async(struct kiocb *iocb)
+{
+ return !is_sync_kiocb(iocb) ||
+ (iocb->ki_flags & IOCB_NOWAIT) ||
+ (current->flags & PF_IO_WORKER);
+}
+
+/* Preserve the VFS fallback's per-iovec read/write semantics. */
+ssize_t tpm_common_read_iter(struct kiocb *iocb, struct iov_iter *to)
+{
+ struct file *file = iocb->ki_filp;
+ ssize_t ret = 0;
+
+ if (tpm_iter_is_async(iocb) || !user_backed_iter(to))
+ return -EIO;
+
+ while (iov_iter_count(to)) {
+ size_t len = iter_iov_len(to);
+ ssize_t nr;
+
+ nr = tpm_common_read(file, iter_iov_addr(to),
+ len, &iocb->ki_pos);
+ if (nr < 0) {
+ if (!ret)
+ ret = nr;
+ break;
+ }
+ ret += nr;
+ iov_iter_advance(to, nr);
+ if (nr != len)
+ break;
+ }
+
+ return ret;
+}
+
+ssize_t tpm_common_write_iter(struct kiocb *iocb, struct iov_iter *from)
+{
+ struct file *file = iocb->ki_filp;
+ ssize_t ret = 0;
+
+ if (tpm_iter_is_async(iocb) || !user_backed_iter(from))
+ return -EIO;
+
+ while (iov_iter_count(from)) {
+ size_t len = iter_iov_len(from);
+ ssize_t nr;
+
+ nr = tpm_common_write(file, iter_iov_addr(from),
+ len, &iocb->ki_pos);
+ if (nr < 0) {
+ if (!ret)
+ ret = nr;
+ break;
+ }
+ ret += nr;
+ iov_iter_advance(from, nr);
+ if (nr != len)
+ break;
+ }
+
+ return ret;
+}
+#endif /* CONFIG_IO_URING */
+
__poll_t tpm_common_poll(struct file *file, poll_table *wait)
{
struct file_priv *priv = file->private_data;
diff --git a/drivers/char/tpm/tpm-dev.c b/drivers/char/tpm/tpm-dev.c
index 74488f0a7b78..56751be46d90 100644
--- a/drivers/char/tpm/tpm-dev.c
+++ b/drivers/char/tpm/tpm-dev.c
@@ -62,6 +62,10 @@ const struct file_operations tpm_fops = {
.open = tpm_open,
.read = tpm_common_read,
.write = tpm_common_write,
+#ifdef CONFIG_IO_URING
+ .read_iter = tpm_common_read_iter,
+ .write_iter = tpm_common_write_iter,
+#endif
.poll = tpm_common_poll,
.release = tpm_release,
};
diff --git a/drivers/char/tpm/tpm-dev.h b/drivers/char/tpm/tpm-dev.h
index 34efb1ffa491..22ea88156833 100644
--- a/drivers/char/tpm/tpm-dev.h
+++ b/drivers/char/tpm/tpm-dev.h
@@ -28,6 +28,10 @@ ssize_t tpm_common_read(struct file *file, char __user *buf,
size_t size, loff_t *off);
ssize_t tpm_common_write(struct file *file, const char __user *buf,
size_t size, loff_t *off);
+#ifdef CONFIG_IO_URING
+ssize_t tpm_common_read_iter(struct kiocb *iocb, struct iov_iter *to);
+ssize_t tpm_common_write_iter(struct kiocb *iocb, struct iov_iter *from);
+#endif
__poll_t tpm_common_poll(struct file *file, poll_table *wait);
void tpm_common_release(struct file *file, struct file_priv *priv);
diff --git a/drivers/char/tpm/tpmrm-dev.c b/drivers/char/tpm/tpmrm-dev.c
index 19e8f2779265..95788c6bdd4c 100644
--- a/drivers/char/tpm/tpmrm-dev.c
+++ b/drivers/char/tpm/tpmrm-dev.c
@@ -49,6 +49,10 @@ const struct file_operations tpmrm_fops = {
.open = tpmrm_open,
.read = tpm_common_read,
.write = tpm_common_write,
+#ifdef CONFIG_IO_URING
+ .read_iter = tpm_common_read_iter,
+ .write_iter = tpm_common_write_iter,
+#endif
.poll = tpm_common_poll,
.release = tpmrm_release,
};
diff --git a/tools/testing/selftests/tpm2/tpm_uring.c b/tools/testing/selftests/tpm2/tpm_uring.c
index 9caa3cba5bf0..37b41c7d295b 100644
--- a/tools/testing/selftests/tpm2/tpm_uring.c
+++ b/tools/testing/selftests/tpm2/tpm_uring.c
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
/*
- * An io_uring read chooses its own file offset. The TPM character devices
- * must ignore it and return the response from its start.
+ * The TPM character devices must reject io_uring reads.
*/
#include <endian.h>
@@ -39,7 +38,7 @@ static void test_read(struct io_uring *ring, const char *path)
struct pollfd pfd = { .events = POLLIN };
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
- int fd, ret, res;
+ int fd, ret, res, n;
fd = open(path, O_RDWR);
if (fd < 0) {
@@ -86,10 +85,11 @@ static void test_read(struct io_uring *ring, const char *path)
res = cqe->res;
io_uring_cqe_seen(ring);
- /* the offset is ignored: the whole response, from its start */
- ksft_test_result(res >= (int)sizeof(*hdr) &&
- be32toh(hdr->size) == res && !hdr->return_code,
- "%s: io_uring read %d\n", path, res);
+ /* the rejected read must leave the whole response in place */
+ n = read(fd, buf, BUF_LEN);
+ ksft_test_result(res == -EIO && n >= (int)sizeof(*hdr) &&
+ be32toh(hdr->size) == n && !hdr->return_code,
+ "%s: io_uring read %d, read() %d\n", path, res, n);
out:
close(fd);
}
--
2.52.0
next prev parent reply other threads:[~2026-11-20 14:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 14:21 [RFC PATCH 0/1] tpm: Do not allow io_uring for /dev/tpm0 and /dev/tpmrm0 Rustam Mustafin
2026-11-20 14:21 ` Rustam Mustafin [this message]
2026-11-20 14:55 ` [RFC PATCH 1/1] " Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120142116.1630010-2-rmustafin@cloudlinux.com \
--to=rmustafin@cloudlinux.com \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=shuah@kernel.org \
--cc=yong010301@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox