Re: [PATCH 0/9] Initial DMABUF support for iommufd

[Shuai Xue <xueshuai@linux.alibaba.com>]

Hi, Nicolin,

在 2025/11/13 15:34, Nicolin Chen 写道:
> On Thu, Nov 13, 2025 at 02:33:01PM +0800, Shuai Xue wrote:
>> Could you share more details for testing?, e.g. QEMU cmdline,
>> Guest kernel version.
> 
> My v6.8 and v6.14 kernels can boot cleanly in the VM.
> 
> vm_image=PATH-to-FILE
> e1000_rom=PATH-to-FILE
> qemu-system-aarch64 \
> 	-object iommufd,id=iommufd0 \
> 	-machine hmat=on -machine virt,accel=kvm,gic-version=3,ras=on,highmem-mmio-size=4T \
> 	-cpu host -smp cpus=62 -m size=16G,slots=2,maxmem=256G -nographic \
> 	-object memory-backend-ram,size=8G,id=m0 -object memory-backend-ram,size=8G,id=m1 \
> 	-numa node,memdev=m0,cpus=0-61,nodeid=0 -numa node,memdev=m1,nodeid=1 \
> 	-numa node,nodeid=2 -numa node,nodeid=3 -numa node,nodeid=4 -numa node,nodeid=5 \
> 	-numa node,nodeid=6 -numa node,nodeid=7 -numa node,nodeid=8 -numa node,nodeid=9 \
> 	-device pxb-pcie,id=pcie.1,bus_nr=1,bus=pcie.0 -device arm-smmuv3,primary-bus=pcie.1,id=smmuv3.1,accel=on,ats=on,ril=off,pasid=on,oas=48 \
> 	-device pcie-root-port,id=pcie.port1,bus=pcie.1,chassis=1,io-reserve=0 \
> 	-device vfio-pci-nohotplug,host=0009:01:00.0,bus=pcie.port1,rombar=0,id=dev0,iommufd=iommufd0 \
> 	-object acpi-generic-initiator,id=gi0,pci-dev=dev0,node=2 \
> 	-object acpi-generic-initiator,id=gi1,pci-dev=dev0,node=3 \
> 	-object acpi-generic-initiator,id=gi2,pci-dev=dev0,node=4 \
> 	-object acpi-generic-initiator,id=gi3,pci-dev=dev0,node=5 \
> 	-object acpi-generic-initiator,id=gi4,pci-dev=dev0,node=6 \
> 	-object acpi-generic-initiator,id=gi5,pci-dev=dev0,node=7 \
> 	-object acpi-generic-initiator,id=gi6,pci-dev=dev0,node=8 \
> 	-object acpi-generic-initiator,id=gi7,pci-dev=dev0,node=9 \
> 	-bios /usr/share/AAVMF/AAVMF_CODE.fd \
> 	-device nvme,drive=nvme0,serial=deadbeaf1,bus=pcie.0 \
> 	-drive file=${vm_image},index=0,media=disk,format=qcow2,if=none,id=nvme0 \
> 	-device e1000,romfile=${e1000_rom},netdev=net0,bus=pcie.0 \
> 	-netdev user,id=net0,hostfwd=tcp::5558-:22,hostfwd=tcp::5586-:5586
> 

Thanks for sharing the command line. The issue was with my QEMU command
line configuration.

Using your command line, I can now boot my v6.6 kernel cleanly in the
VM, and the PCIe passthrough device works correctly.

Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>

Thanks.
Shuai