[PATCH v2 0/2] selftests/resctrl: SNC kernel support discovery

[PATCH v2 0/2] selftests/resctrl: SNC kernel support discovery

[Maciej Wieczor-Retman]

Changes v2:
- Removed patches 2 and 3 since now this part will be supported by the
  kernel.

Sub-Numa Clustering (SNC) allows splitting CPU cores, caches and memory
into multiple NUMA nodes. When enabled, NUMA-aware applications can
achieve better performance on bigger server platforms.

SNC support in the kernel is currently in review [1]. With SNC enabled
and kernel support in place all the tests will function normally. There
might be a problem when SNC is enabled but the system is still using an
older kernel version without SNC support. Currently the only message
displayed in that situation is a guess that SNC might be enabled and is
causing issues. That message also is displayed whenever the test fails
on an Intel platform.

Add a mechanism to discover kernel support for SNC which will add more
meaning and certainty to the error message.

Series was tested on Ice Lake server platforms with SNC disabled, SNC-2
and SNC-4. The tests were also ran with and without kernel support for
SNC.

Series applies cleanly on kselftest/next.

[1] https://lore.kernel.org/all/20240503203325.21512-1-tony.luck@intel.com/

Previous versions of this series:
[v1] https://lore.kernel.org/all/cover.1709721159.git.maciej.wieczor-retman@intel.com/

Maciej Wieczor-Retman (2):
  selftests/resctrl: Adjust effective L3 cache size with SNC enabled
  selftests/resctrl: Adjust SNC support messages

 tools/testing/selftests/resctrl/cat_test.c  |   2 +-
 tools/testing/selftests/resctrl/cmt_test.c  |   6 +-
 tools/testing/selftests/resctrl/mba_test.c  |   2 +
 tools/testing/selftests/resctrl/mbm_test.c  |   4 +-
 tools/testing/selftests/resctrl/resctrl.h   |   8 +-
 tools/testing/selftests/resctrl/resctrlfs.c | 131 +++++++++++++++++++-
 6 files changed, 144 insertions(+), 9 deletions(-)

-- 
2.45.0

[PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Maciej Wieczor-Retman]

Sub-NUMA Cluster divides CPUs sharing an L3 cache into separate NUMA
nodes. Systems may support splitting into either two or four nodes.

When SNC mode is enabled the effective amount of L3 cache available
for allocation is divided by the number of nodes per L3.

Detect which SNC mode is active by comparing the number of CPUs
that share a cache with CPU0, with the number of CPUs on node0.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Co-developed-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
---
 tools/testing/selftests/resctrl/resctrl.h   |  3 ++
 tools/testing/selftests/resctrl/resctrlfs.c | 59 +++++++++++++++++++++
 2 files changed, 62 insertions(+)

diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
index 00d51fa7531c..3dd5d6779786 100644
--- a/tools/testing/selftests/resctrl/resctrl.h
+++ b/tools/testing/selftests/resctrl/resctrl.h
@@ -11,6 +11,7 @@
 #include <signal.h>
 #include <dirent.h>
 #include <stdbool.h>
+#include <ctype.h>
 #include <sys/stat.h>
 #include <sys/ioctl.h>
 #include <sys/mount.h>
@@ -49,6 +50,7 @@
 		umount_resctrlfs();		\
 		exit(EXIT_FAILURE);		\
 	} while (0)
+#define MAX_SNC		4
 
 /*
  * user_params:		User supplied parameters
@@ -131,6 +133,7 @@ extern pid_t bm_pid, ppid;
 
 extern char llc_occup_path[1024];
 
+int snc_ways(void);
 int get_vendor(void);
 bool check_resctrlfs_support(void);
 int filter_dmesg(void);
diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c
index 1cade75176eb..e4d3624a8817 100644
--- a/tools/testing/selftests/resctrl/resctrlfs.c
+++ b/tools/testing/selftests/resctrl/resctrlfs.c
@@ -156,6 +156,63 @@ int get_domain_id(const char *resource, int cpu_no, int *domain_id)
 	return 0;
 }
 
+/*
+ * Count number of CPUs in a /sys bit map
+ */
+static unsigned int count_sys_bitmap_bits(char *name)
+{
+	FILE *fp = fopen(name, "r");
+	int count = 0, c;
+
+	if (!fp)
+		return 0;
+
+	while ((c = fgetc(fp)) != EOF) {
+		if (!isxdigit(c))
+			continue;
+		switch (c) {
+		case 'f':
+			count++;
+		case '7': case 'b': case 'd': case 'e':
+			count++;
+		case '3': case '5': case '6': case '9': case 'a': case 'c':
+			count++;
+		case '1': case '2': case '4': case '8':
+			count++;
+		}
+	}
+	fclose(fp);
+
+	return count;
+}
+
+/*
+ * Detect SNC by comparing #CPUs in node0 with #CPUs sharing LLC with CPU0.
+ * If some CPUs are offline the numbers may not be exact multiples of each
+ * other. Any offline CPUs on node0 will be also gone from shared_cpu_map of
+ * CPU0 but offline CPUs from other nodes will only make the cache_cpus value
+ * lower. Still try to get the ratio right by preventing the second possibility.
+ */
+int snc_ways(void)
+{
+	int node_cpus, cache_cpus, i;
+
+	node_cpus = count_sys_bitmap_bits("/sys/devices/system/node/node0/cpumap");
+	cache_cpus = count_sys_bitmap_bits("/sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_map");
+
+	if (!node_cpus || !cache_cpus) {
+		fprintf(stderr, "Warning could not determine Sub-NUMA Cluster mode\n");
+		return 1;
+	}
+
+	for (i = 1; i <= MAX_SNC ; i++) {
+		if (i * node_cpus >= cache_cpus)
+			return i;
+	}
+
+	return 1;
+}
+
 /*
  * get_cache_size - Get cache size for a specified CPU
  * @cpu_no:	CPU number
@@ -211,6 +268,8 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size
 			break;
 	}
 
+	if (cache_num == 3)
+		*cache_size /= snc_ways();
 	return 0;
 }
 
-- 
2.45.0

RE: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Luck, Tony]

If/when my SNC patches go upstream the SNC check could become:

snc_ways=$(ls -d /sys/fs/resctrl/mon_data/mon_L3_00/mon_sub_L3_* 2>/dev/null | wc -l)

assuming you have /sys/fs/resctrl mounted.

-Tony

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Maciej Wieczor-Retman]

On 2024-05-15 at 16:48:44 +0000, Luck, Tony wrote:
>If/when my SNC patches go upstream the SNC check could become:
>
>snc_ways=$(ls -d /sys/fs/resctrl/mon_data/mon_L3_00/mon_sub_L3_* 2>/dev/null | wc -l)

But this won't work without your kernel patches right? 

If they are already in the kernel used by the person launching the selftests
then there shouldn't be any problems to report. The idea was that if the
CMT/MBM/MBA selftests fail, the message with "SNC is the problem" is only
displayed if SNC is enabled and there is no kernel support for SNC.

>
>assuming you have /sys/fs/resctrl mounted.
>
>-Tony

-- 
Kind regards
Maciej Wieczór-Retman

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Reinette Chatre]

Hi Maciej,

Regarding shortlog: L3 cache size should no longer be adjusted when
SNC is enabled. You mention that the tests are passing when running
with this adjustment ... I think that this may be because the test
now just runs on a smaller portion of the cache?

On 5/15/24 4:18 AM, Maciej Wieczor-Retman wrote:
> Sub-NUMA Cluster divides CPUs sharing an L3 cache into separate NUMA
> nodes. Systems may support splitting into either two or four nodes.

fyi ... from the most recent kernel submission 2, 3, or 4 nodes
are possible:
https://lore.kernel.org/lkml/20240528222006.58283-20-tony.luck@intel.com/

> 
> When SNC mode is enabled the effective amount of L3 cache available
> for allocation is divided by the number of nodes per L3.

This was a mistake in original implementation and no longer done.

> 
> Detect which SNC mode is active by comparing the number of CPUs
> that share a cache with CPU0, with the number of CPUs on node0.
> 
> Signed-off-by: Tony Luck <tony.luck@intel.com>
> Co-developed-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
> Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
> ---
>   tools/testing/selftests/resctrl/resctrl.h   |  3 ++
>   tools/testing/selftests/resctrl/resctrlfs.c | 59 +++++++++++++++++++++
>   2 files changed, 62 insertions(+)
> 
> diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
> index 00d51fa7531c..3dd5d6779786 100644
> --- a/tools/testing/selftests/resctrl/resctrl.h
> +++ b/tools/testing/selftests/resctrl/resctrl.h
> @@ -11,6 +11,7 @@
>   #include <signal.h>
>   #include <dirent.h>
>   #include <stdbool.h>
> +#include <ctype.h>
>   #include <sys/stat.h>
>   #include <sys/ioctl.h>
>   #include <sys/mount.h>
> @@ -49,6 +50,7 @@
>   		umount_resctrlfs();		\
>   		exit(EXIT_FAILURE);		\
>   	} while (0)
> +#define MAX_SNC		4
>   
>   /*
>    * user_params:		User supplied parameters
> @@ -131,6 +133,7 @@ extern pid_t bm_pid, ppid;
>   
>   extern char llc_occup_path[1024];
>   
> +int snc_ways(void);
>   int get_vendor(void);
>   bool check_resctrlfs_support(void);
>   int filter_dmesg(void);
> diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c
> index 1cade75176eb..e4d3624a8817 100644
> --- a/tools/testing/selftests/resctrl/resctrlfs.c
> +++ b/tools/testing/selftests/resctrl/resctrlfs.c
> @@ -156,6 +156,63 @@ int get_domain_id(const char *resource, int cpu_no, int *domain_id)
>   	return 0;
>   }
>   
> +/*
> + * Count number of CPUs in a /sys bit map
> + */
> +static unsigned int count_sys_bitmap_bits(char *name)
> +{
> +	FILE *fp = fopen(name, "r");
> +	int count = 0, c;
> +
> +	if (!fp)
> +		return 0;
> +
> +	while ((c = fgetc(fp)) != EOF) {
> +		if (!isxdigit(c))
> +			continue;
> +		switch (c) {
> +		case 'f':
> +			count++;
> +		case '7': case 'b': case 'd': case 'e':
> +			count++;
> +		case '3': case '5': case '6': case '9': case 'a': case 'c':
> +			count++;
> +		case '1': case '2': case '4': case '8':
> +			count++;
> +		}
> +	}
> +	fclose(fp);
> +
> +	return count;
> +}
> +
> +/*
> + * Detect SNC by comparing #CPUs in node0 with #CPUs sharing LLC with CPU0.
> + * If some CPUs are offline the numbers may not be exact multiples of each
> + * other. Any offline CPUs on node0 will be also gone from shared_cpu_map of
> + * CPU0 but offline CPUs from other nodes will only make the cache_cpus value
> + * lower. Still try to get the ratio right by preventing the second possibility.
> + */
> +int snc_ways(void)

"ways" have a specific meaning in cache terminology. Perhaps rather something
like "snc_nodes_per_cache()" or even copy the kernel's (which is still WIP though)
snc_nodes_per_l3_cache()

> +{
> +	int node_cpus, cache_cpus, i;
> +
> +	node_cpus = count_sys_bitmap_bits("/sys/devices/system/node/node0/cpumap");
> +	cache_cpus = count_sys_bitmap_bits("/sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_map");
> +
> +	if (!node_cpus || !cache_cpus) {
> +		fprintf(stderr, "Warning could not determine Sub-NUMA Cluster mode\n");

The tests just use "ksft_print_msg()" for error messages. The "Warning could ..."
is somewhat unexpected, perhaps just "Could not determine ..." or "Warning: Could not ..."?

> +		return 1;
> +	}
> +
> +	for (i = 1; i <= MAX_SNC ; i++) {
> +		if (i * node_cpus >= cache_cpus)
> +			return i;
> +	}

This is not obvious to me. From the function comments this seems to address the
scenarios when CPUs from other nodes are offline. It is not clear to me how
this loop addresses this. For example, let's say there are four SNC nodes
associated with a cache and only the node0 CPUs are online. The above would
detect this as "1", not "4", if I read this right?

I wonder if it may not be easier to just follow what the kernel does
(in the new version).
User space can learn the number of online and present CPUs from
/sys/devices/system/cpu/online and /sys/devices/system/cpu/present
respectively. A simple string compare of the contents can be used to
determine if they are identical and a warning can be printed if they are not.
With a warning when accurate detection cannot be done the simple
check will do.

Could you please add an informational message indicating how many SNC nodes
were indeed detected?

> +
> +	return 1;
> +}
> +
>   /*
>    * get_cache_size - Get cache size for a specified CPU
>    * @cpu_no:	CPU number
> @@ -211,6 +268,8 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size
>   			break;
>   	}
>   
> +	if (cache_num == 3)
> +		*cache_size /= snc_ways();
>   	return 0;
>   }
>   

I think this can be dropped.

Reinette

RE: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Luck, Tony]

>> When SNC mode is enabled the effective amount of L3 cache available
>> for allocation is divided by the number of nodes per L3.
>
> This was a mistake in original implementation and no longer done.

My original kernel code adjusted value reported in the "size" file in resctrl.
That's no longer done because the effective size depends on how applications
are allocating and using memory. Since the kernel can't know that, it
seemed best to just report the total size of the cache.

But I think the resctrl tests still need to take this into account when running
llc_occupancy tests.

E.g. on a 2-way SNC system with a 100MB L3 cache a test that allocates
memory from its local SNC node (default behavior without using libnuma)
will only see 50 MB llc_occupancy with a fully populated L3 mask in the
schemata file.

-Tony

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Reinette Chatre]

Hi Tony,

On 5/30/24 4:46 PM, Luck, Tony wrote:
>>> When SNC mode is enabled the effective amount of L3 cache available
>>> for allocation is divided by the number of nodes per L3.
>>
>> This was a mistake in original implementation and no longer done.
> 
> My original kernel code adjusted value reported in the "size" file in resctrl.
> That's no longer done because the effective size depends on how applications
> are allocating and using memory. Since the kernel can't know that, it
> seemed best to just report the total size of the cache.
> 
> But I think the resctrl tests still need to take this into account when running
> llc_occupancy tests.
> 
> E.g. on a 2-way SNC system with a 100MB L3 cache a test that allocates
> memory from its local SNC node (default behavior without using libnuma)
> will only see 50 MB llc_occupancy with a fully populated L3 mask in the
> schemata file.

This seems to contradict the "Cache and memory bandwidth allocation features
continue to operate at the scope of the L3 cache." statement from [1]?

Reinette

[1] https://lore.kernel.org/lkml/20240528222006.58283-1-tony.luck@intel.com/

RE: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Luck, Tony]

> >>> When SNC mode is enabled the effective amount of L3 cache available
> >>> for allocation is divided by the number of nodes per L3.
> >>
> >> This was a mistake in original implementation and no longer done.
> >
> > My original kernel code adjusted value reported in the "size" file in resctrl.
> > That's no longer done because the effective size depends on how applications
> > are allocating and using memory. Since the kernel can't know that, it
> > seemed best to just report the total size of the cache.
> >
> > But I think the resctrl tests still need to take this into account when running
> > llc_occupancy tests.
> >
> > E.g. on a 2-way SNC system with a 100MB L3 cache a test that allocates
> > memory from its local SNC node (default behavior without using libnuma)
> > will only see 50 MB llc_occupancy with a fully populated L3 mask in the
> > schemata file.
>
> This seems to contradict the "Cache and memory bandwidth allocation features
> continue to operate at the scope of the L3 cache." statement from [1]?

I'll clean that up. MBA isn't affected. But cache allocation is affected in that
the amount of cache represented by each bit in the masks in the schemata
file is reduced by a factor equal to SNC nodes per L3 cache.

-Tony
>
> Reinette
>
> [1] https://lore.kernel.org/lkml/20240528222006.58283-1-tony.luck@intel.com/

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Reinette Chatre]

Hi Tony and Maciej,

On 5/30/24 5:34 PM, Luck, Tony wrote:
>>>>> When SNC mode is enabled the effective amount of L3 cache available
>>>>> for allocation is divided by the number of nodes per L3.
>>>>
>>>> This was a mistake in original implementation and no longer done.
>>>
>>> My original kernel code adjusted value reported in the "size" file in resctrl.
>>> That's no longer done because the effective size depends on how applications
>>> are allocating and using memory. Since the kernel can't know that, it
>>> seemed best to just report the total size of the cache.
>>>
>>> But I think the resctrl tests still need to take this into account when running
>>> llc_occupancy tests.
>>>
>>> E.g. on a 2-way SNC system with a 100MB L3 cache a test that allocates
>>> memory from its local SNC node (default behavior without using libnuma)
>>> will only see 50 MB llc_occupancy with a fully populated L3 mask in the
>>> schemata file.
>>
>> This seems to contradict the "Cache and memory bandwidth allocation features
>> continue to operate at the scope of the L3 cache." statement from [1]?
> 
> I'll clean that up. MBA isn't affected. But cache allocation is affected in that
> the amount of cache represented by each bit in the masks in the schemata
> file is reduced by a factor equal to SNC nodes per L3 cache.

Thanks Tony. I trust that this is what Maciej intended since the change
is specifically named "Adjuct _effective_ L3 cache size". I'd like to
recommend that your comments be added before the change to
get_cache_size() ...

	/*
	 * The amount of cache represented by each bit in the masks
	 * in the schemata file is reduced by a factor equal to SNC
	 * nodes per L3 cache.
	 * E.g. on a SNC-2 system with a 100MB L3 cache a test that
	 * allocates memory from its local SNC node (default behavior
	 * without using libnuma) will only see 50 MB llc_occupancy
	 * with a fully populated L3 mask in the schemata file.
	 */

Reinette

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Maciej Wieczor-Retman]

Hello,
sorry it took me so long to get back to this. I prepared the next version with
your comments applied and Tony's replies taken into account.

I wanted to briefly discuss this before posting:

On 2024-05-30 at 16:07:29 -0700, Reinette Chatre wrote:
>On 5/15/24 4:18 AM, Maciej Wieczor-Retman wrote:
>> +		return 1;
>> +	}
>> +
>> +	for (i = 1; i <= MAX_SNC ; i++) {
>> +		if (i * node_cpus >= cache_cpus)
>> +			return i;
>> +	}
>
>This is not obvious to me. From the function comments this seems to address the
>scenarios when CPUs from other nodes are offline. It is not clear to me how
>this loop addresses this. For example, let's say there are four SNC nodes
>associated with a cache and only the node0 CPUs are online. The above would
>detect this as "1", not "4", if I read this right?
>
>I wonder if it may not be easier to just follow what the kernel does
>(in the new version).
>User space can learn the number of online and present CPUs from
>/sys/devices/system/cpu/online and /sys/devices/system/cpu/present
>respectively. A simple string compare of the contents can be used to
>determine if they are identical and a warning can be printed if they are not.
>With a warning when accurate detection cannot be done the simple
>check will do.
>
>Could you please add an informational message indicating how many SNC nodes
>were indeed detected?

Should the information "how many SNC nodes are detected?" get printed every time
(by which I mean at the end of CMT and MBM tests) or only when we get the error
"SNC enabled but kernel doesn't support it" happens? Of course in the first case
if there is only 1 node detected nothing would be printed to avoid noise.

-- 
Kind regards
Maciej Wieczór-Retman

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Reinette Chatre]

Hi Maciej,

On 6/25/24 4:04 AM, Maciej Wieczor-Retman wrote:
> Hello,
> sorry it took me so long to get back to this. I prepared the next version with
> your comments applied and Tony's replies taken into account.

Thank you very much for sticking with this.

> 
> I wanted to briefly discuss this before posting:
> 
> On 2024-05-30 at 16:07:29 -0700, Reinette Chatre wrote:
>> On 5/15/24 4:18 AM, Maciej Wieczor-Retman wrote:
>>> +		return 1;
>>> +	}
>>> +
>>> +	for (i = 1; i <= MAX_SNC ; i++) {
>>> +		if (i * node_cpus >= cache_cpus)
>>> +			return i;
>>> +	}
>>
>> This is not obvious to me. From the function comments this seems to address the
>> scenarios when CPUs from other nodes are offline. It is not clear to me how
>> this loop addresses this. For example, let's say there are four SNC nodes
>> associated with a cache and only the node0 CPUs are online. The above would
>> detect this as "1", not "4", if I read this right?
>>
>> I wonder if it may not be easier to just follow what the kernel does
>> (in the new version).
>> User space can learn the number of online and present CPUs from
>> /sys/devices/system/cpu/online and /sys/devices/system/cpu/present
>> respectively. A simple string compare of the contents can be used to
>> determine if they are identical and a warning can be printed if they are not.
>> With a warning when accurate detection cannot be done the simple
>> check will do.
>>
>> Could you please add an informational message indicating how many SNC nodes
>> were indeed detected?
> 
> Should the information "how many SNC nodes are detected?" get printed every time
> (by which I mean at the end of CMT and MBM tests) or only when we get the error
> "SNC enabled but kernel doesn't support it" happens? Of course in the first case
> if there is only 1 node detected nothing would be printed to avoid noise.

I agree that it is not needed to print something about SNC if it is disabled.
hmmm ... so SNC impacts every test but it is only detected by default during CAT
and CMT test, with MBA and MBM "detection" only triggered if the test fails?

What if the "SNC detection" is moved to be within run_single_test() but instead of
repeating the detection from scratch every time it rather works like get_vendor()
where the full detection is only done on first attempt? run_single_test() can detect if
SNC is enabled and (if number of SNC nodes > 1) print an informational message
that is inherited by all tests.
Any test that needs to know the number of SNC nodes can continue to use the
same function used for detection (that only does actual detection once).

What do you think?

Reinette

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Maciej Wieczor-Retman]

Hello!,

On 2024-06-25 at 09:28:55 -0700, Reinette Chatre wrote:
>Hi Maciej,
>
>On 6/25/24 4:04 AM, Maciej Wieczor-Retman wrote:
>> Hello,
>> sorry it took me so long to get back to this. I prepared the next version with
>> your comments applied and Tony's replies taken into account.
>
>Thank you very much for sticking with this.
>
>> 
>> I wanted to briefly discuss this before posting:
>> 
>> On 2024-05-30 at 16:07:29 -0700, Reinette Chatre wrote:
>> > On 5/15/24 4:18 AM, Maciej Wieczor-Retman wrote:
>> > > +		return 1;
>> > > +	}
>> > > +
>> > > +	for (i = 1; i <= MAX_SNC ; i++) {
>> > > +		if (i * node_cpus >= cache_cpus)
>> > > +			return i;
>> > > +	}
>> > 
>> > This is not obvious to me. From the function comments this seems to address the
>> > scenarios when CPUs from other nodes are offline. It is not clear to me how
>> > this loop addresses this. For example, let's say there are four SNC nodes
>> > associated with a cache and only the node0 CPUs are online. The above would
>> > detect this as "1", not "4", if I read this right?
>> > 
>> > I wonder if it may not be easier to just follow what the kernel does
>> > (in the new version).
>> > User space can learn the number of online and present CPUs from
>> > /sys/devices/system/cpu/online and /sys/devices/system/cpu/present
>> > respectively. A simple string compare of the contents can be used to
>> > determine if they are identical and a warning can be printed if they are not.
>> > With a warning when accurate detection cannot be done the simple
>> > check will do.
>> > 
>> > Could you please add an informational message indicating how many SNC nodes
>> > were indeed detected?
>> 
>> Should the information "how many SNC nodes are detected?" get printed every time
>> (by which I mean at the end of CMT and MBM tests) or only when we get the error
>> "SNC enabled but kernel doesn't support it" happens? Of course in the first case
>> if there is only 1 node detected nothing would be printed to avoid noise.
>
>I agree that it is not needed to print something about SNC if it is disabled.
>hmmm ... so SNC impacts every test but it is only detected by default during CAT
>and CMT test, with MBA and MBM "detection" only triggered if the test fails?

Yes, snc_ways() ran before starting CAT and CMT to adjust cache size variable.
And then after CAT,CMT,MBM and MBA if the return value indicated failure.

>
>What if the "SNC detection" is moved to be within run_single_test() but instead of
>repeating the detection from scratch every time it rather works like get_vendor()
>where the full detection is only done on first attempt? run_single_test() can detect if
>SNC is enabled and (if number of SNC nodes > 1) print an informational message
>that is inherited by all tests.
>Any test that needs to know the number of SNC nodes can continue to use the
>same function used for detection (that only does actual detection once).
>
>What do you think?

I think running the detection once at the start and then reusing the results is
a good idea. You're proposing adding a value (global or passed through all the
tests) that would get initialized on the first run_single_test()?

And then the SNC status (if enabled) + a warning if the detection could be wrong
(because of the online/present cpus ratio) would happen before the test runs?

On the warning placement I think it should be moved out of being printed only on
failure. I did some experiments using "chcpu" to enable/disable cores and then
run selftests. They didn't have any problems succeeding even though SNC
detection detected different mode every time (I added a printf() around the line
that cache size is modified to show what SNC mode is detected). While I
understand these tests shouldn't fail since they just use a different portion of
the cache I think the user should be informed it's not really NUMA aware if the
detection was wrong:

(this was a 2 socket machine with SNC-2 and 55296K L3 cache size)

This is without any changes:
	[root]# ./resctrl_tests -t CMT
	# dmesg: [   11.464842] resctrl: Sub-NUMA Cluster mode detected with 2 nodes per L3 cache
	...
	SNC NODES DETECTED : 2
	# Cache size :28311552
	...
	# Average LLC val: 12413952
	# Cache span (bytes): 11796480
	ok 1 CMT: test

This is with all cores on node 1 disabled:
	[root]# ./resctrl_tests -t CMT
	# dmesg: [   11.464842] resctrl: Sub-NUMA Cluster mode detected with 2 nodes per L3 cache
	...
	SNC NODES DETECTED : 1
	# Cache size :56623104
	...
	# Average LLC val: 22606848
	# Cache span (bytes): 23592960
	ok 1 CMT: test

And this with one core on node 0 disabled:
	[root]# ./resctrl_tests -t CMT
	# dmesg: [   11.464842] resctrl: Sub-NUMA Cluster mode detected with 2 nodes per L3 cache
	...
	SNC NODES DETECTED : 3
	# Cache size :18874368
	...
	# Average LLC val: 7382016
	# Cache span (bytes): 7864320
	ok 1 CMT: test

CAT also succeeds although it reports bigger or smaller cache miss rates than
normally:

SNC NODES DETECTED : 1 <-- all cpus on node 1 offline
# Percent diff=12.7
# Percent diff=10.2
# Percent diff=7.8
# Percent diff=6.7
ok 1 L3_CAT: test

SNC NODES DETECTED : 2 <-- real
# Percent diff=49.6
# Percent diff=37.8
# Percent diff=22.4
# Percent diff=16.0
ok 1 L3_CAT: test

SNC NODES DETECTED : 3 <-- one cpu on node 0 offline
# Percent diff=76.6
# Percent diff=53.3
# Percent diff=35.1
# Percent diff=28.9
ok 1 L3_CAT: test

>
>Reinette
>

-- 
Kind regards
Maciej Wieczór-Retman

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Reinette Chatre]

Hi Maciej,

On 6/26/24 12:09 AM, Maciej Wieczor-Retman wrote:
> Hello!,
> 
> On 2024-06-25 at 09:28:55 -0700, Reinette Chatre wrote:
>> Hi Maciej,
>>
>> On 6/25/24 4:04 AM, Maciej Wieczor-Retman wrote:
>>> Hello,
>>> sorry it took me so long to get back to this. I prepared the next version with
>>> your comments applied and Tony's replies taken into account.
>>
>> Thank you very much for sticking with this.
>>
>>>
>>> I wanted to briefly discuss this before posting:
>>>
>>> On 2024-05-30 at 16:07:29 -0700, Reinette Chatre wrote:
>>>> On 5/15/24 4:18 AM, Maciej Wieczor-Retman wrote:
>>>>> +		return 1;
>>>>> +	}
>>>>> +
>>>>> +	for (i = 1; i <= MAX_SNC ; i++) {
>>>>> +		if (i * node_cpus >= cache_cpus)
>>>>> +			return i;
>>>>> +	}
>>>>
>>>> This is not obvious to me. From the function comments this seems to address the
>>>> scenarios when CPUs from other nodes are offline. It is not clear to me how
>>>> this loop addresses this. For example, let's say there are four SNC nodes
>>>> associated with a cache and only the node0 CPUs are online. The above would
>>>> detect this as "1", not "4", if I read this right?
>>>>
>>>> I wonder if it may not be easier to just follow what the kernel does
>>>> (in the new version).
>>>> User space can learn the number of online and present CPUs from
>>>> /sys/devices/system/cpu/online and /sys/devices/system/cpu/present
>>>> respectively. A simple string compare of the contents can be used to
>>>> determine if they are identical and a warning can be printed if they are not.
>>>> With a warning when accurate detection cannot be done the simple
>>>> check will do.
>>>>
>>>> Could you please add an informational message indicating how many SNC nodes
>>>> were indeed detected?
>>>
>>> Should the information "how many SNC nodes are detected?" get printed every time
>>> (by which I mean at the end of CMT and MBM tests) or only when we get the error
>>> "SNC enabled but kernel doesn't support it" happens? Of course in the first case
>>> if there is only 1 node detected nothing would be printed to avoid noise.
>>
>> I agree that it is not needed to print something about SNC if it is disabled.
>> hmmm ... so SNC impacts every test but it is only detected by default during CAT
>> and CMT test, with MBA and MBM "detection" only triggered if the test fails?
> 
> Yes, snc_ways() ran before starting CAT and CMT to adjust cache size variable.
> And then after CAT,CMT,MBM and MBA if the return value indicated failure.
> 
>>
>> What if the "SNC detection" is moved to be within run_single_test() but instead of
>> repeating the detection from scratch every time it rather works like get_vendor()
>> where the full detection is only done on first attempt? run_single_test() can detect if
>> SNC is enabled and (if number of SNC nodes > 1) print an informational message
>> that is inherited by all tests.
>> Any test that needs to know the number of SNC nodes can continue to use the
>> same function used for detection (that only does actual detection once).
>>
>> What do you think?
> 
> I think running the detection once at the start and then reusing the results is
> a good idea. You're proposing adding a value (global or passed through all the
> tests) that would get initialized on the first run_single_test()?

I was thinking about a solution similar to get_vendor() that uses a static local
variable. A global variable could work also.

> And then the SNC status (if enabled) + a warning if the detection could be wrong
> (because of the online/present cpus ratio) would happen before the test runs?

I do not think this was part of previous tests, but yes, this is a concern where
a warning would be helpful.

> On the warning placement I think it should be moved out of being printed only on
> failure. I did some experiments using "chcpu" to enable/disable cores and then
> run selftests. They didn't have any problems succeeding even though SNC
> detection detected different mode every time (I added a printf() around the line

I am not surprised here since there has not been much tuning of the CAT test.

> that cache size is modified to show what SNC mode is detected). While I
> understand these tests shouldn't fail since they just use a different portion of
> the cache I think the user should be informed it's not really NUMA aware if the
> detection was wrong:

Seems like there are two warnings to consider:
(a) SNC detection may be wrong.
(b) If SNC is enabled and kernel does not support SNC then the tests may fail.

For (a) I think that it is possible to know when SNC detection may be wrong. A test
similar to the kernel test that compares the "online" and "present" CPUs [1] can
be used. The /sys/devices/system/cpu/online and /sys/devices/system/cpu/present
files are available for this. A simpler way may be to just print a warning if
/sys/devices/system/cpu/offline is not empty and set the number of SNC nodes
to 1. Instead, a new "snc_unreliable" global can be set that can be used
to print additional information during test failure.

I do think that it is fair to print all the SNC details during detection but
I am concerned that those messages will be out of sight during test failures
and I thus do think it is useful to have extra information during test
failure.

Reinette

[1] https://lore.kernel.org/lkml/20240621223859.43471-18-tony.luck@intel.com/

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Maciej Wieczor-Retman]

On 2024-06-26 at 09:46:01 -0700, Reinette Chatre wrote:
>Hi Maciej,
>
>On 6/26/24 12:09 AM, Maciej Wieczor-Retman wrote:
>> Hello!,
>> 
>> On 2024-06-25 at 09:28:55 -0700, Reinette Chatre wrote:
>> > Hi Maciej,
>> > 
>> > On 6/25/24 4:04 AM, Maciej Wieczor-Retman wrote:
>> > > Hello,
>> > > sorry it took me so long to get back to this. I prepared the next version with
>> > > your comments applied and Tony's replies taken into account.
>> > 
>> > Thank you very much for sticking with this.
>> > 
>> > > 
>> > > I wanted to briefly discuss this before posting:
>> > > 
>> > > On 2024-05-30 at 16:07:29 -0700, Reinette Chatre wrote:
>> > > > On 5/15/24 4:18 AM, Maciej Wieczor-Retman wrote:
>> > > > > +		return 1;
>> > > > > +	}
>> > > > > +
>> > > > > +	for (i = 1; i <= MAX_SNC ; i++) {
>> > > > > +		if (i * node_cpus >= cache_cpus)
>> > > > > +			return i;
>> > > > > +	}
>> > > > 
>> > > > This is not obvious to me. From the function comments this seems to address the
>> > > > scenarios when CPUs from other nodes are offline. It is not clear to me how
>> > > > this loop addresses this. For example, let's say there are four SNC nodes
>> > > > associated with a cache and only the node0 CPUs are online. The above would
>> > > > detect this as "1", not "4", if I read this right?
>> > > > 
>> > > > I wonder if it may not be easier to just follow what the kernel does
>> > > > (in the new version).
>> > > > User space can learn the number of online and present CPUs from
>> > > > /sys/devices/system/cpu/online and /sys/devices/system/cpu/present
>> > > > respectively. A simple string compare of the contents can be used to
>> > > > determine if they are identical and a warning can be printed if they are not.
>> > > > With a warning when accurate detection cannot be done the simple
>> > > > check will do.
>> > > > 
>> > > > Could you please add an informational message indicating how many SNC nodes
>> > > > were indeed detected?
>> > > 
>> > > Should the information "how many SNC nodes are detected?" get printed every time
>> > > (by which I mean at the end of CMT and MBM tests) or only when we get the error
>> > > "SNC enabled but kernel doesn't support it" happens? Of course in the first case
>> > > if there is only 1 node detected nothing would be printed to avoid noise.
>> > 
>> > I agree that it is not needed to print something about SNC if it is disabled.
>> > hmmm ... so SNC impacts every test but it is only detected by default during CAT
>> > and CMT test, with MBA and MBM "detection" only triggered if the test fails?
>> 
>> Yes, snc_ways() ran before starting CAT and CMT to adjust cache size variable.
>> And then after CAT,CMT,MBM and MBA if the return value indicated failure.
>> 
>> > 
>> > What if the "SNC detection" is moved to be within run_single_test() but instead of
>> > repeating the detection from scratch every time it rather works like get_vendor()
>> > where the full detection is only done on first attempt? run_single_test() can detect if
>> > SNC is enabled and (if number of SNC nodes > 1) print an informational message
>> > that is inherited by all tests.
>> > Any test that needs to know the number of SNC nodes can continue to use the
>> > same function used for detection (that only does actual detection once).
>> > 
>> > What do you think?
>> 
>> I think running the detection once at the start and then reusing the results is
>> a good idea. You're proposing adding a value (global or passed through all the
>> tests) that would get initialized on the first run_single_test()?
>
>I was thinking about a solution similar to get_vendor() that uses a static local
>variable. A global variable could work also.

Oh yes, static local is good too, I'll try that.

>
>> And then the SNC status (if enabled) + a warning if the detection could be wrong
>> (because of the online/present cpus ratio) would happen before the test runs?
>
>I do not think this was part of previous tests, but yes, this is a concern where
>a warning would be helpful.
>
>> On the warning placement I think it should be moved out of being printed only on
>> failure. I did some experiments using "chcpu" to enable/disable cores and then
>> run selftests. They didn't have any problems succeeding even though SNC
>> detection detected different mode every time (I added a printf() around the line
>
>I am not surprised here since there has not been much tuning of the CAT test.
>
>> that cache size is modified to show what SNC mode is detected). While I
>> understand these tests shouldn't fail since they just use a different portion of
>> the cache I think the user should be informed it's not really NUMA aware if the
>> detection was wrong:
>
>Seems like there are two warnings to consider:
>(a) SNC detection may be wrong.
>(b) If SNC is enabled and kernel does not support SNC then the tests may fail.
>
>For (a) I think that it is possible to know when SNC detection may be wrong. A test
>similar to the kernel test that compares the "online" and "present" CPUs [1] can
>be used. The /sys/devices/system/cpu/online and /sys/devices/system/cpu/present
>files are available for this. A simpler way may be to just print a warning if
>/sys/devices/system/cpu/offline is not empty and set the number of SNC nodes
>to 1. Instead, a new "snc_unreliable" global can be set that can be used
>to print additional information during test failure.

The empty offline file is a cool idea, less files to open :)

>
>I do think that it is fair to print all the SNC details during detection but
>I am concerned that those messages will be out of sight during test failures
>and I thus do think it is useful to have extra information during test
>failure.

Yeah, I've been thinking about what is the best way to display these for a
while. Maybe you're right that messages at the top will be lost. What about this
set of messages:

1. First run of run_single_test()
	1.1. For all tests:
		- detected snc mode (if > 1)
			- check if cpu/offline file is empty, set the global
			  variable and print a message saying snc mode might be
			  wrong

2. At the end of tests
	2.1. For CMT, CAT, MBM, MBA:
		- test failed
		- snc detection reports it's enabled
		- kernel version doesn't support snc

	2.2. Additional message for CMT, CAT (since the cache size is divided):
		- test failed or succeeded
		- snc detection reports the offline file is not empty
		- kernel version supports snc

The 1. message will be printed at the top since it's more informational (what is
the SNC mode?) and then 2. messages will deal with possible issues / failures
and will be nicely visible at the end. What do you think about this?

>
>Reinette
>
>[1] https://lore.kernel.org/lkml/20240621223859.43471-18-tony.luck@intel.com/

-- 
Kind regards
Maciej Wieczór-Retman

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Reinette Chatre]

Hi Maciej

On 6/27/24 2:50 AM, Maciej Wieczor-Retman wrote:
> 
> Yeah, I've been thinking about what is the best way to display these for a
> while. Maybe you're right that messages at the top will be lost. What about this
> set of messages:
> 
> 1. First run of run_single_test()
> 	1.1. For all tests:
> 		- detected snc mode (if > 1)
> 			- check if cpu/offline file is empty, set the global
> 			  variable and print a message saying snc mode might be
> 			  wrong

When SNC detection is considered unreliable, everything else becomes unreliable also
since kernel support for SNC is only visible (in future kernels) when SNC is enabled.
I thus think that if it is found that SNC detection may be unreliable then the number
of SNC nodes should be hardcoded to 1 and a default message about possible interference
by SNC should be printed at all test failures.

> 2. At the end of tests
> 	2.1. For CMT, CAT, MBM, MBA:
> 		- test failed
> 		- snc detection reports it's enabled
> 		- kernel version doesn't support snc

Sounds like the "all goes well" scenario when SNC support is reliably detected.

> 
> 	2.2. Additional message for CMT, CAT (since the cache size is divided):
> 		- test failed or succeeded
> 		- snc detection reports the offline file is not empty
> 		- kernel version supports snc

I am not able to follow what happens in these scenarios.

> 
> The 1. message will be printed at the top since it's more informational (what is
> the SNC mode?) and then 2. messages will deal with possible issues / failures
> and will be nicely visible at the end. What do you think about this?

It is not obvious to me what the messages may be but the times/locations when
messages are printed sounds good to me.

Thank you

Reinette

Re: [PATCH v2 1/2] selftests/resctrl: Adjust effective L3 cache size with SNC enabled

[Maciej Wieczor-Retman]

On 2024-06-27 at 09:30:24 -0700, Reinette Chatre wrote:
>Hi Maciej
>
>On 6/27/24 2:50 AM, Maciej Wieczor-Retman wrote:
>> 
>> Yeah, I've been thinking about what is the best way to display these for a
>> while. Maybe you're right that messages at the top will be lost. What about this
>> set of messages:
>> 
>> 1. First run of run_single_test()
>> 	1.1. For all tests:
>> 		- detected snc mode (if > 1)
>> 			- check if cpu/offline file is empty, set the global
>> 			  variable and print a message saying snc mode might be
>> 			  wrong
>
>When SNC detection is considered unreliable, everything else becomes unreliable also
>since kernel support for SNC is only visible (in future kernels) when SNC is enabled.
>I thus think that if it is found that SNC detection may be unreliable then the number
>of SNC nodes should be hardcoded to 1 and a default message about possible interference
>by SNC should be printed at all test failures.

Okay, that sounds good.

>
>> 2. At the end of tests
>> 	2.1. For CMT, CAT, MBM, MBA:
>> 		- test failed
>> 		- snc detection reports it's enabled
>> 		- kernel version doesn't support snc
>
>Sounds like the "all goes well" scenario when SNC support is reliably detected.

This was supposed to be the error message that was already there before - now
I'd just add the information about whether SNC was actually enabled.

>
>> 
>> 	2.2. Additional message for CMT, CAT (since the cache size is divided):
>> 		- test failed or succeeded
>> 		- snc detection reports the offline file is not empty
>> 		- kernel version supports snc
>
>I am not able to follow what happens in these scenarios.

And this I intended as an explanation to the example I mentioned earlier - the
test succeeds but the cache size was miscalculated due to offline cpus. But
after applying your suggestion above to just set the snc mode to 1 when SNC
detection is unreliable I guess this doesn't matter anymore.

>
>> 
>> The 1. message will be printed at the top since it's more informational (what is
>> the SNC mode?) and then 2. messages will deal with possible issues / failures
>> and will be nicely visible at the end. What do you think about this?
>
>It is not obvious to me what the messages may be but the times/locations when
>messages are printed sounds good to me.
>
>Thank you

Thanks for all the tips and great ideas, I hope to send the next version between
monday and wednesday after trying to trigger all possible corner cases.

>
>Reinette
>
>

-- 
Kind regards
Maciej Wieczór-Retman

[PATCH v2 2/2] selftests/resctrl: Adjust SNC support messages

[Maciej Wieczor-Retman]

Resctrl selftest prints a message on test failure that Sub-Numa
Clustering (SNC) could be enabled and points the user to check theirs BIOS
settings. No actual check is performed before printing that message so
it is not very accurate in pinpointing a problem.

Figuring out if SNC is enabled is only one part of the problem, the
other being whether the kernel supports it. As there is no easy
interface that simply states SNC support in the kernel one can find that
information by comparing L3 cache sizes from different sources. Cache
size reported by /sys/devices/system/node/node0/cpu0/cache/index3/size
will always show the full cache size even if it's split by enabled SNC.
On the other hand /sys/fs/resctrl/size has information about L3 size,
that with kernel support is adjusted for enabled SNC.

Add a function to find a cache size from /sys/fs/resctrl/size since
finding that information from the other source is already implemented.

Add a function that compares the two cache sizes and use it to make the
SNC support message more meaningful.

Add the SNC support message just after MBA's check_results() since MBA
shares code with MBM and also can suffer from enabled SNC if there is no
support in the kernel.

Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
---
Changelog v2:
- Move snc_ways() checks from individual tests into
  snc_kernel_support().
- Write better comment for snc_kernel_support().

 tools/testing/selftests/resctrl/cat_test.c  |  2 +-
 tools/testing/selftests/resctrl/cmt_test.c  |  6 +-
 tools/testing/selftests/resctrl/mba_test.c  |  2 +
 tools/testing/selftests/resctrl/mbm_test.c  |  4 +-
 tools/testing/selftests/resctrl/resctrl.h   |  5 +-
 tools/testing/selftests/resctrl/resctrlfs.c | 72 ++++++++++++++++++++-
 6 files changed, 82 insertions(+), 9 deletions(-)

diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c
index c7686fb6641a..722b4fcaf788 100644
--- a/tools/testing/selftests/resctrl/cat_test.c
+++ b/tools/testing/selftests/resctrl/cat_test.c
@@ -253,7 +253,7 @@ static int cat_run_test(const struct resctrl_test *test, const struct user_param
 		return ret;
 
 	/* Get L3/L2 cache size */
-	ret = get_cache_size(uparams->cpu, test->resource, &cache_total_size);
+	ret = get_sys_cache_size(uparams->cpu, test->resource, &cache_total_size);
 	if (ret)
 		return ret;
 	ksft_print_msg("Cache size :%lu\n", cache_total_size);
diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c
index a44e6fcd37b7..0ff232d38c26 100644
--- a/tools/testing/selftests/resctrl/cmt_test.c
+++ b/tools/testing/selftests/resctrl/cmt_test.c
@@ -112,7 +112,7 @@ static int cmt_run_test(const struct resctrl_test *test, const struct user_param
 	if (ret)
 		return ret;
 
-	ret = get_cache_size(uparams->cpu, "L3", &cache_total_size);
+	ret = get_sys_cache_size(uparams->cpu, "L3", &cache_total_size);
 	if (ret)
 		return ret;
 	ksft_print_msg("Cache size :%lu\n", cache_total_size);
@@ -157,8 +157,8 @@ static int cmt_run_test(const struct resctrl_test *test, const struct user_param
 		goto out;
 
 	ret = check_results(&param, span, n);
-	if (ret && (get_vendor() == ARCH_INTEL))
-		ksft_print_msg("Intel CMT may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
+	if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support())
+		ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");
 
 out:
 	free(span_str);
diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c
index 5d6af9e8afed..74e1ebb14904 100644
--- a/tools/testing/selftests/resctrl/mba_test.c
+++ b/tools/testing/selftests/resctrl/mba_test.c
@@ -161,6 +161,8 @@ static int mba_run_test(const struct resctrl_test *test, const struct user_param
 		return ret;
 
 	ret = check_results();
+	if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support())
+		ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");
 
 	return ret;
 }
diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
index 3059ccc51a5a..e542938272f9 100644
--- a/tools/testing/selftests/resctrl/mbm_test.c
+++ b/tools/testing/selftests/resctrl/mbm_test.c
@@ -129,8 +129,8 @@ static int mbm_run_test(const struct resctrl_test *test, const struct user_param
 		return ret;
 
 	ret = check_results(DEFAULT_SPAN);
-	if (ret && (get_vendor() == ARCH_INTEL))
-		ksft_print_msg("Intel MBM may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
+	if (ret && (get_vendor() == ARCH_INTEL) && !snc_kernel_support())
+		ksft_print_msg("Kernel doesn't support Sub-NUMA Clustering but it is enabled. Check BIOS configuration.\n");
 
 	return ret;
 }
diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
index 3dd5d6779786..2bd7c3f71733 100644
--- a/tools/testing/selftests/resctrl/resctrl.h
+++ b/tools/testing/selftests/resctrl/resctrl.h
@@ -28,6 +28,7 @@
 #define RESCTRL_PATH		"/sys/fs/resctrl"
 #define PHYS_ID_PATH		"/sys/devices/system/cpu/cpu"
 #define INFO_PATH		"/sys/fs/resctrl/info"
+#define SIZE_PATH		"/sys/fs/resctrl/size"
 
 /*
  * CPU vendor IDs
@@ -165,12 +166,14 @@ unsigned long create_bit_mask(unsigned int start, unsigned int len);
 unsigned int count_contiguous_bits(unsigned long val, unsigned int *start);
 int get_full_cbm(const char *cache_type, unsigned long *mask);
 int get_mask_no_shareable(const char *cache_type, unsigned long *mask);
-int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size);
 int resource_info_unsigned_get(const char *resource, const char *filename, unsigned int *val);
+int get_sys_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size);
+int get_resctrl_cache_size(const char *cache_type, unsigned long *cache_size);
 void ctrlc_handler(int signum, siginfo_t *info, void *ptr);
 int signal_handler_register(const struct resctrl_test *test);
 void signal_handler_unregister(void);
 unsigned int count_bits(unsigned long n);
+int snc_kernel_support(void);
 
 void perf_event_attr_initialize(struct perf_event_attr *pea, __u64 config);
 void perf_event_initialize_read_format(struct perf_event_read *pe_read);
diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c
index e4d3624a8817..88f97db72246 100644
--- a/tools/testing/selftests/resctrl/resctrlfs.c
+++ b/tools/testing/selftests/resctrl/resctrlfs.c
@@ -214,14 +214,14 @@ int snc_ways(void)
 }
 
 /*
- * get_cache_size - Get cache size for a specified CPU
+ * get_sys_cache_size - Get cache size for a specified CPU
  * @cpu_no:	CPU number
  * @cache_type:	Cache level L2/L3
  * @cache_size:	pointer to cache_size
  *
  * Return: = 0 on success, < 0 on failure.
  */
-int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size)
+int get_sys_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size)
 {
 	char cache_path[1024], cache_str[64];
 	int length, i, cache_num;
@@ -273,6 +273,44 @@ int get_cache_size(int cpu_no, const char *cache_type, unsigned long *cache_size
 	return 0;
 }
 
+/*
+ * get_resctrl_cache_size - Get cache size as reported by resctrl
+ * @cache_type:	Cache level L2/L3
+ * @cache_size:	pointer to cache_size
+ *
+ * Return: = 0 on success, < 0 on failure.
+ */
+int get_resctrl_cache_size(const char *cache_type, unsigned long *cache_size)
+{
+	char line[256], cache_prefix[16], *stripped_line, *token;
+	size_t len;
+	FILE *fp;
+
+	strcpy(cache_prefix, cache_type);
+	strncat(cache_prefix, ":", 1);
+
+	fp = fopen(SIZE_PATH, "r");
+	if (!fp) {
+		ksft_print_msg("Failed to open %s : '%s'\n",
+			       SIZE_PATH, strerror(errno));
+		return -1;
+	}
+
+	while (fgets(line, sizeof(line), fp)) {
+		stripped_line = strstr(line, cache_prefix);
+
+		if (stripped_line) {
+			len = strlen(cache_prefix);
+			stripped_line += len;
+			token = strtok(stripped_line, ";");
+			if (sscanf(token, "0=%lu", cache_size) <= 0)
+				return -1;
+		}
+	}
+	fclose(fp);
+	return 0;
+}
+
 #define CORE_SIBLINGS_PATH	"/sys/bus/cpu/devices/cpu"
 
 /*
@@ -935,3 +973,33 @@ unsigned int count_bits(unsigned long n)
 
 	return count;
 }
+
+/**
+ * snc_kernel_support - Compare system reported cache size and resctrl
+ * reported cache size to get an idea if SNC is supported on the kernel side.
+ *
+ * Return: 0 if not supported, 1 if SNC is disabled or SNC is both enabled and
+ * supported, < 0 on failure.
+ */
+int snc_kernel_support(void)
+{
+	unsigned long resctrl_cache_size, node_cache_size;
+	int ret;
+
+	/* If SNC is disabled then its kernel support isn't important. */
+	if (snc_ways() == 1)
+		return 1;
+
+	ret = get_sys_cache_size(0, "L3", &node_cache_size);
+	if (ret < 0)
+		return ret;
+
+	ret = get_resctrl_cache_size("L3", &resctrl_cache_size);
+	if (ret < 0)
+		return ret;
+
+	if (resctrl_cache_size == node_cache_size)
+		return 1;
+
+	return 0;
+}
-- 
2.45.0

Re: [PATCH v2 2/2] selftests/resctrl: Adjust SNC support messages

[Reinette Chatre]

Hi Maciej,

On 5/15/24 4:18 AM, Maciej Wieczor-Retman wrote:
> Resctrl selftest prints a message on test failure that Sub-Numa
> Clustering (SNC) could be enabled and points the user to check theirs BIOS
> settings. No actual check is performed before printing that message so
> it is not very accurate in pinpointing a problem.
> 
> Figuring out if SNC is enabled is only one part of the problem, the
> other being whether the kernel supports it. As there is no easy
> interface that simply states SNC support in the kernel one can find that
> information by comparing L3 cache sizes from different sources. Cache
> size reported by /sys/devices/system/node/node0/cpu0/cache/index3/size
> will always show the full cache size even if it's split by enabled SNC.
> On the other hand /sys/fs/resctrl/size has information about L3 size,
> that with kernel support is adjusted for enabled SNC.
> 
> Add a function to find a cache size from /sys/fs/resctrl/size since
> finding that information from the other source is already implemented.
> 
> Add a function that compares the two cache sizes and use it to make the
> SNC support message more meaningful.

Please note that the new version of SNC kernel support ([1]) that this
series is based on no longer adjusts the cache size. Detecting kernel support
for SNC (if the new solution is accepted) can be done with the test for the
existence of the files Tony mentioned in [2].

> 
> Add the SNC support message just after MBA's check_results() since MBA
> shares code with MBM and also can suffer from enabled SNC if there is no
> support in the kernel.
> 
> Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
> ---

Reinette

[1] https://lore.kernel.org/all/20240503203325.21512-1-tony.luck@intel.com/
[2] https://lore.kernel.org/lkml/SJ1PR11MB6083320F30DBCBB59574F0BDFCEC2@SJ1PR11MB6083.namprd11.prod.outlook.com/

Re: [PATCH v2 2/2] selftests/resctrl: Adjust SNC support messages

[Maciej Wieczor-Retman]

Hello!

On 2024-05-30 at 16:07:34 -0700, Reinette Chatre wrote:
>Hi Maciej,
>
>On 5/15/24 4:18 AM, Maciej Wieczor-Retman wrote:
>> Resctrl selftest prints a message on test failure that Sub-Numa
>> Clustering (SNC) could be enabled and points the user to check theirs BIOS
>> settings. No actual check is performed before printing that message so
>> it is not very accurate in pinpointing a problem.
>> 
>> Figuring out if SNC is enabled is only one part of the problem, the
>> other being whether the kernel supports it. As there is no easy
>> interface that simply states SNC support in the kernel one can find that
>> information by comparing L3 cache sizes from different sources. Cache
>> size reported by /sys/devices/system/node/node0/cpu0/cache/index3/size
>> will always show the full cache size even if it's split by enabled SNC.
>> On the other hand /sys/fs/resctrl/size has information about L3 size,
>> that with kernel support is adjusted for enabled SNC.
>> 
>> Add a function to find a cache size from /sys/fs/resctrl/size since
>> finding that information from the other source is already implemented.
>> 
>> Add a function that compares the two cache sizes and use it to make the
>> SNC support message more meaningful.
>
>Please note that the new version of SNC kernel support ([1]) that this
>series is based on no longer adjusts the cache size. Detecting kernel support
>for SNC (if the new solution is accepted) can be done with the test for the
>existence of the files Tony mentioned in [2].

Thank you for your comments on both patches, I don't know how I missed this
fact. I'll revise my patches accordingly.

>
>> 
>> Add the SNC support message just after MBA's check_results() since MBA
>> shares code with MBM and also can suffer from enabled SNC if there is no
>> support in the kernel.
>> 
>> Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
>> ---
>
>Reinette
>
>[1] https://lore.kernel.org/all/20240503203325.21512-1-tony.luck@intel.com/
>[2] https://lore.kernel.org/lkml/SJ1PR11MB6083320F30DBCBB59574F0BDFCEC2@SJ1PR11MB6083.namprd11.prod.outlook.com/
>

-- 
Kind regards
Maciej Wieczór-Retman