From: Yeoreum Yun <yeoreum.yun@arm.com>
To: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Yeoreum Yun <yeoreum.yun@arm.com>, Zi Yan <ziy@nvidia.com>,
Andrew Morton <akpm@linux-foundation.org>,
David Hildenbrand <david@kernel.org>,
Lorenzo Stoakes <ljs@kernel.org>,
"Liam R. Howlett" <liam@infradead.org>,
Nico Pache <nico.pache@linux.dev>,
Ryan Roberts <ryan.roberts@arm.com>, Dev Jain <dev.jain@arm.com>,
Barry Song <baohua@kernel.org>, Lance Yang <lance.yang@linux.dev>,
Usama Arif <usama.arif@linux.dev>,
Vlastimil Babka <vbabka@kernel.org>,
Mike Rapoport <rppt@kernel.org>,
Suren Baghdasaryan <surenb@google.com>,
Michal Hocko <mhocko@suse.com>, Shuah Khan <shuah@kernel.org>,
Kevin Brodsky <kevin.brodsky@arm.com>,
linux-mm@kvack.org, linux-kselftest@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] kselftest: mm: replace usage of /proc/self/smaps for check_huge_xxx() helper
Date: Fri, 28 Aug 2026 08:44:38 +0100 [thread overview]
Message-ID: <apE8ZvWg219b9aW_@e129823.arm.com> (raw)
In-Reply-To: <31e649d3-7653-49c0-b73e-933ba2a86f4a@linux.alibaba.com>
>
>
> On 8/28/26 12:54 AM, Yeoreum Yun wrote:
> > On Thu, Aug 27, 2026 at 11:03:17AM -0400, Zi Yan wrote:
> > > On Thu Aug 27, 2026 at 6:44 AM EDT, Yeoreum Yun wrote:
> > > > Hi Baolin,
> > > >
> > > > >
> > > > >
> > > > > On 8/26/26 8:24 PM, Yeoreum Yun wrote:
> > > > > > Since glibc commit 321e1fc73f (“malloc: Enable 2MB THP by default on AArch64”),
> > > > > > glibc may call madvise(MADV_HUGEPAGE) for sufficiently large allocations
> > > > > > made by memalign().
> > > > > >
> > > > > > The underlying VMA may start at a different address from the aligned
> > > > > > address returned by memalign(). Furthermore, a subsequent
> > > > > > madvise(MADV_HUGEPAGE) call does not split the VMA because the flag is
> > > > > > already set.
> > > > > >
> > > > > > This causes split_huge_page_test to fail because the check_huge_xxx()
> > > > > > helpers incorrectly require the address returned by memalign() to
> > > > > > match the VMA start address reported in /proc/self/smaps.
> > > > > >
> > > > > > Fix this by using /proc/self/pagemap and /proc/kpageflags instead of
> > > > > > /proc/self/smaps to detect huge pages.
> > > > > >
> > > > > > Reported-by: David Hildenbrand (Arm) <david@kernel.org>
> > > > > > Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
> > > > > > ---
> > > > > > tools/testing/selftests/mm/vm_util.c | 130 ++++++++++++++++++++---------------
> > > > > > tools/testing/selftests/mm/vm_util.h | 1 +
> > > > > > 2 files changed, 77 insertions(+), 54 deletions(-)
> > > > > >
> > > > > > diff --git a/tools/testing/selftests/mm/vm_util.c b/tools/testing/selftests/mm/vm_util.c
> > > > > > index 4821a3563036..1d0959b3b9e8 100644
> > > > > > --- a/tools/testing/selftests/mm/vm_util.c
> > > > > > +++ b/tools/testing/selftests/mm/vm_util.c
> > > > > > @@ -351,31 +351,13 @@ char *__get_smap_entry(void *addr, const char *pattern, char *buf, size_t len)
> > > > > > return entry;
> > > > > > }
> > > > > > -static bool __check_pmd_huge(void *addr, char *pattern, int nr_hpages,
> > > > > > - uint64_t hpage_size)
> > > > > > -{
> > > > > > - char buffer[MAX_LINE_LENGTH];
> > > > > > - uint64_t thp = -1;
> > > > > > - char *entry;
> > > > > > -
> > > > > > - entry = __get_smap_entry(addr, pattern, buffer, sizeof(buffer));
> > > > > > - if (!entry)
> > > > > > - goto err_out;
> > > > > > -
> > > > > > - if (sscanf(entry, "%9" SCNu64 " kB", &thp) != 1)
> > > > > > - ksft_exit_fail_msg("Reading smap error\n");
> > > > > > -
> > > > > > -err_out:
> > > > > > - return thp == (nr_hpages * (hpage_size >> 10));
> > > > > > -}
> > > > > > -
> > > > > > -static bool check_large_folios(void *addr, size_t len, int nr_hpages,
> > > > > > - uint64_t hpage_size)
> > > > > > +static bool check_large_folios(int pagemap_fd, int kpageflags_fd,
> > > > > > + void *addr, size_t len, int nr_hpages,
> > > > > > + uint64_t hpage_size)
> > > > > > {
> > > > > > int order = 0, pagesize = getpagesize();
> > > > > > unsigned int nr_pages = hpage_size / pagesize;
> > > > > > int orders[MAX_NR_ORDERS], status;
> > > > > > - int pagemap_fd, kpageflags_fd;
> > > > > > bool ret = false;
> > > > > > if (!nr_pages)
> > > > > > @@ -386,15 +368,6 @@ static bool check_large_folios(void *addr, size_t len, int nr_hpages,
> > > > > > ksft_exit_fail_msg("invalid order\n");
> > > > > > memset(orders, 0, sizeof(int) * MAX_NR_ORDERS);
> > > > > > - pagemap_fd = open(PAGEMAP_PATH, O_RDONLY);
> > > > > > - if (pagemap_fd == -1)
> > > > > > - ksft_exit_fail_msg("read pagemap fail\n");
> > > > > > -
> > > > > > - kpageflags_fd = open(KPAGEFLAGS_PATH, O_RDONLY);
> > > > > > - if (kpageflags_fd == -1) {
> > > > > > - close(pagemap_fd);
> > > > > > - ksft_exit_fail_msg("read kpageflags fail\n");
> > > > > > - }
> > > > > > status = gather_folio_orders(addr, len, pagemap_fd,
> > > > > > kpageflags_fd, orders, MAX_NR_ORDERS);
> > > > > > @@ -405,48 +378,97 @@ static bool check_large_folios(void *addr, size_t len, int nr_hpages,
> > > > > > ret = true;
> > > > > > out:
> > > > > > - close(pagemap_fd);
> > > > > > - close(kpageflags_fd);
> > > > > > return ret;
> > > > > > }
> > > > > > -bool check_huge_anon(void *addr, size_t len, int nr_hpages, uint64_t hpage_size)
> > > > > > +enum check_huge_type {
> > > > > > + CHECK_HUGE_ANON,
> > > > > > + CHECK_HUGE_FILE,
> > > > > > + CHECK_HUGE_SHMEM,
> > > > > > +};
> > > > > > +
> > > > > > +static bool __check_pmd_huge(void *addr, size_t len, int nr_hpages,
> > > > > > + uint64_t hpage_size, enum check_huge_type type)
> > > > >
> > > > > The original __check_pmd_huge() is only for PMD-sized large folios, but now
> > > > > it not only checks PMD-sized large folios but also mTHP large folios, which
> > > > > I find confusing. Please keep its original semantics, and only check
> > > > > PMD-sized large folios.
> > > >
> > > > But, It seems to valuable to check other page-flags than checking
> > > > the large-folio only.
> > > >
> > > > >
> > > > > > {
> > > > > > - uint64_t pmd_pagesize = read_pmd_pagesize();
> > > > > > + int pagemap_fd, kpageflags_fd;
> > > > > > + uint64_t pmd_pagesize, granule;
> > > > > > + uint64_t categories, kpf;
> > > > > > + unsigned long pfn;
> > > > > > + bool check_large, huge_mapped;
> > > > > > + char *start = addr;
> > > > > > + char *end = start + len;
> > > > > > + pmd_pagesize = read_pmd_pagesize();
> > > > > > if (!pmd_pagesize)
> > > > > > ksft_exit_fail_msg("reading PMD pagesize failed\n");
> > > > > > - if (hpage_size == pmd_pagesize)
> > > > > > - return __check_pmd_huge(addr, "AnonHugePages: ", nr_hpages, hpage_size);
> > > > > > + if (nr_hpages > 0) {
> > > > > > + check_large = true;
> > > > > > + granule = hpage_size;
> > > > > > + } else {
> > > > > > + check_large = false;
> > > > > > + granule = psize();
> > > > > > + }
> > > > >
> > > > > This is incorrect for the mTHP large folio check. I already hit a selftest
> > > > > failure. Please test your patches before sending them out.
> > > >
> > > > Since for a split case, large folio can be as-is but only remove
> > > > the PMD mapping only, skipping the large_folio checking seems valid
> > > > when nr_hpage is 0.
> > >
> > > What split care are you referring to? split_huge_page_test() always
> > > splits the folio.
> >
> > Not for split_huge_page_test case but for khugepage testcase like
> > collapse_full_of_compound() test.
> >
> > >
> > > >
> > > > And the failure of test seems because of unmapped area after
> > > > changinng the collapse-order. Therefore, it seems to fine with below
> > > > patch:
> > > >
> > > > ---------------&<----------------------
> > > >
> > > > diff --git a/tools/testing/selftests/mm/vm_util.c b/tools/testing/selftests/mm/vm_util.c
> > > > index 1d0959b3b9e8..f174a76d2310 100644
> > > > --- a/tools/testing/selftests/mm/vm_util.c
> > > > +++ b/tools/testing/selftests/mm/vm_util.c
> > > > @@ -387,14 +387,14 @@ enum check_huge_type {
> > > > CHECK_HUGE_SHMEM,
> > > > };
> > > >
> > > > -static bool __check_pmd_huge(void *addr, size_t len, int nr_hpages,
> > > > - uint64_t hpage_size, enum check_huge_type type)
> > > > +static bool __check_huge(void *addr, size_t len, int nr_hpages,
> > > > + uint64_t hpage_size, enum check_huge_type type)
> > > > {
> > > > int pagemap_fd, kpageflags_fd;
> > > > uint64_t pmd_pagesize, granule;
> > > > uint64_t categories, kpf;
> > > > unsigned long pfn;
> > > > - bool check_large, huge_mapped;
> > > > + bool check_large, check_huge_mapped, allow_nomap;
> > > > char *start = addr;
> > > > char *end = start + len;
> > > >
> > > > @@ -405,11 +405,20 @@ static bool __check_pmd_huge(void *addr, size_t len, int nr_hpages,
> > > > if (nr_hpages > 0) {
> > > > check_large = true;
> > > > granule = hpage_size;
> > > > + if (granule == pmd_pagesize)
> > > > + check_huge_mapped = true;
> > > > + else
> > > > + check_huge_mapped = false;
> > > > } else {
> > > > check_large = false;
> > > > granule = psize();
> > > > }
> > >
> > > The else is for nr_hpages == 0? But it looks like we allow negative
> > > nr_hpages. Maybe add a bool expect_huge = nr_hpages > 0 to make it
> > > explicit.
> >
> > Fair enough. I'll change.
> >
> > >
> > > granule is an optimization for PAGE_IS_HUGE scanning? When we expect a
> > > PMD mapping, we just scan at pmd_pagesize granularity, otherwise we
> > > check every single page?
> > >
> > > At the high level, the function looks good to me, the rules are:
> > >
> > > 1. if hpage_size == pmd_pagesize, we need to check PAGE_IS_HUGE and
> > > check_large_folio() can be skipped, since we only care about mappings.
> > > This checks for PMD mappings.
> > >
> > > 2. in other cases, check_large_folios() is always needed. This is for
> > > mTHP checks.
>
> Yes, this is also what I thought. And the following code looks good to me.
> Thanks.
>
> > Exactly, but for some testcase where use this function, doesn't
> > trigger split of large _folio but only check the HUGE MAP is removed
> > (nr_hpage == 0), it skips the chekc_large_folio().
> >
> > >
> > > I think the ifs at the beginning is confusing. Can we do something like
> > > below to get rid of the ifs? I also moved KPF_* checks in a separate
> > > function. Feel free to make changes if you find any issue there.
> > >
> > > static bool check_huge_type(uint64_t categories, uint64_t kpageflags,
> > > enum check_huge_type type)
> > > {
> > > bool file = categories & PAGE_IS_FILE;
> > > bool swapbacked = kpageflags & KPF_SWAPBACKED;
> > >
> > > switch (type) {
> > > case CHECK_HUGE_ANON:
> > > return !file;
> > > case CHECK_HUGE_FILE:
> > > return file && !swapbacked;
> > > case CHECK_HUGE_SHMEM:
> > > return file && swapbacked;
> > > }
> > >
> > > return false;
> > > }
> > >
> > > static bool __check_huge(void *addr, size_t len, int nr_hpages,
> > > uint64_t hpage_size, enum check_huge_type type)
> > > {
> > > int pagemap_fd, kpageflags_fd;
> > > int nr_pmd_mappings = 0;
> > > uint64_t pmd_pagesize, scan_mapping_size;
> > > uint64_t categories, kpf;
> > > unsigned long pfn;
> > > bool check_pmd_mapping;
> > > bool allow_nonpresent;
> > > bool ret = false;
> > > char *start = addr;
> > > char *end = start + len;
> > >
> > > pmd_pagesize = read_pmd_pagesize();
> > > if (!pmd_pagesize)
> > > ksft_exit_fail_msg("reading PMD pagesize failed\n");
> > >
> > > check_pmd_mapping = hpage_size == pmd_pagesize;
> > > scan_mapping_size = nr_hpages > 0 ? hpage_size : psize();
> > > /* Some mTHP tests check a partially populated PMD-sized range. */
> > > allow_nonpresent = (uint64_t)nr_hpages * hpage_size < len;
> > >
> > > pagemap_fd = open(PAGEMAP_PATH, O_RDONLY);
> > > if (pagemap_fd < 0)
> > > ksft_exit_fail_msg("open pagemap fail\n");
> > >
> > > kpageflags_fd = open(KPAGEFLAGS_PATH, O_RDONLY);
> > > if (kpageflags_fd < 0) {
> > > close(pagemap_fd);
> > > ksft_exit_fail_msg("open kpageflags fail\n");
> > > }
> > >
> > > /* PTE-mapped large folios cannot be identified by PAGE_IS_HUGE. */
> > > if (!check_pmd_mapping &&
> > > !check_large_folios(pagemap_fd, kpageflags_fd, addr, len,
> > > nr_hpages, hpage_size))
> > > goto out;
> > >
> > > for (; start < end; start += scan_mapping_size) {
> > > categories = pagemap_scan_get_categories(pagemap_fd, start);
> > > pfn = pagemap_get_pfn(pagemap_fd, start);
> > > if (pfn == -1UL) {
> > > if (!allow_nonpresent)
> > > goto out;
> > > continue;
> > > }
> > > if (pageflags_get(pfn, kpageflags_fd, &kpf))
> > > ksft_exit_fail_msg("read kpageflags: %s\n", strerror(errno));
> > > if (check_pmd_mapping && (categories & PAGE_IS_HUGE))
> > > nr_pmd_mappings++;
> > > if (kpf & KPF_COMPOUND_TAIL)
> > > continue;
> > > if (!check_huge_type(categories, kpf, type))
> > > goto out;
> > > }
> > > if (check_pmd_mapping && nr_pmd_mappings != nr_hpages)
> > > goto out;
> >
> > Again, because of collapse_full_of_compound() testcase,
> > it would be failed for this. so, it would better to skip
> > check_large_folioes() when nr_hpages is 0.
>
> IIUC, when nr_hpages is 0, we should also call check_large_folios() to
> verify that there are no large folios within this address range, which is
> also what the previous code did.
>
> Also, I tried Zi's code, and it passed all my khugepaged selftests. I'm not
> sure why you saw the collapse_full_of_compound() test case fail.
Ah, Sorry to my misunderstding I've misread the code on condition :(.
(!check_pmd_mapping as check_pmd_mapping)...
Yeap. it seems fine to check PAGE_IS_HUGE instead of large folio for
pmd_hugepage case.
Sorry to make noise.
--
Sincerely,
Yeoreum Yun
next prev parent reply other threads:[~2026-08-28 7:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-26 12:24 [PATCH v2 0/2] kselftest: mm: fix some failure of split_huge_page_test Yeoreum Yun
2026-08-26 12:24 ` [PATCH v2 1/2] kselftest: mm: prevent random failure of huge page split for khugepaged Yeoreum Yun
2026-08-27 10:59 ` David Hildenbrand (Arm)
2026-08-27 11:11 ` Yeoreum Yun
2026-08-26 12:24 ` [PATCH v2 2/2] kselftest: mm: replace usage of /proc/self/smaps for check_huge_xxx() helper Yeoreum Yun
2026-08-27 8:28 ` Baolin Wang
2026-08-27 9:11 ` Yeoreum Yun
2026-08-27 10:44 ` Yeoreum Yun
2026-08-27 15:03 ` Zi Yan
2026-08-27 16:54 ` Yeoreum Yun
2026-08-28 1:00 ` Baolin Wang
2026-08-28 7:44 ` Yeoreum Yun [this message]
2026-08-27 10:56 ` David Hildenbrand (Arm)
2026-08-27 11:07 ` Yeoreum Yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=apE8ZvWg219b9aW_@e129823.arm.com \
--to=yeoreum.yun@arm.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=kevin.brodsky@arm.com \
--cc=lance.yang@linux.dev \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=nico.pache@linux.dev \
--cc=rppt@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=shuah@kernel.org \
--cc=surenb@google.com \
--cc=usama.arif@linux.dev \
--cc=vbabka@kernel.org \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox