Linux Kernel Selftest development
 help / color / mirror / Atom feed
From: Hajime Tazaki <thehajime@gmail.com>
To: ljs@kernel.org
Cc: linux-mm@kvack.org, geert@linux-m68k.org, daniel@thingy.jp,
	shuah@kernel.org, akpm@linux-foundation.org, david@kernel.org,
	liam@infradead.org, vbabka@kernel.org, rppt@kernel.org,
	surenb@google.com, mhocko@suse.com,
	linux-kselftest@vger.kernel.org, linux-um@lists.infradead.org
Subject: Re: [RFC PATCH 4/6] selftests: fix build errors on alpine linux
Date: Sat, 15 Aug 2026 07:29:22 +0900	[thread overview]
Message-ID: <m2y0e8pc8t.wl-thehajime@gmail.com> (raw)
In-Reply-To: <an8MHlxZzu6a_1ui@lucifer>


On Fri, 14 Aug 2026 21:39:33 +0900,
Lorenzo Stoakes (ARM) wrote:
> 
> On Thu, Aug 13, 2026 at 03:33:59PM +0900, Hajime Tazaki wrote:
> > Some nommu architectures only work on Alpine Linux, which doesn't use
> > glibc for the standard library.  It uses musl-libc and is implemented in
> > a different way as glibc, resulting build failures.
> >
> > This commit fixes this issue by adding missing definitions. The fixes
> > are now only covered to TARGETS=mm which was tested for the moment;
> > future contributions are needed to fully build/execute tests on nommu
> > platforms.
> >
> > Cc: Shuah Khan <shuah@kernel.org>
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > Cc: David Hildenbrand <david@kernel.org>
> > Cc: Lorenzo Stoakes <ljs@kernel.org>
> > Cc: "Liam R. Howlett" <liam@infradead.org>
> > Cc: Vlastimil Babka <vbabka@kernel.org>
> > Cc: Mike Rapoport <rppt@kernel.org>
> > Cc: Suren Baghdasaryan <surenb@google.com>
> > Cc: Michal Hocko <mhocko@suse.com>
> > Cc: linux-kselftest@vger.kernel.org
> > Cc: linux-mm@kvack.org
> > Cc: linux-um@lists.infradead.org
> > Signed-off-by: Hajime Tazaki <thehajime@gmail.com>
> 
> I mean vaguely looks un-invasive which is the test here.
> 
> Couple comments below.
(snip)
> > diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
> > index f02cc8a2e4ae..2cc819006424 100644
> > --- a/tools/testing/selftests/lib.mk
> > +++ b/tools/testing/selftests/lib.mk
> > @@ -197,7 +197,7 @@ clean: $(if $(TEST_GEN_MODS_DIR),clean_mods_dir)
> >  	$(CLEAN)
> >
> >  # Build with _GNU_SOURCE by default
> 
> You probably want to update this comment.

indeed, will update this part (may even not needed to modify this).

> > -CFLAGS += -D_GNU_SOURCE=
> > +CFLAGS += -D_GNU_SOURCE= -D_LARGEFILE64_SOURCE

(snip)
> > diff --git a/tools/testing/selftests/mm/hugetlb_dio.c b/tools/testing/selftests/mm/hugetlb_dio.c
> > index fb4600570e13..aee6be530ccb 100644
> > --- a/tools/testing/selftests/mm/hugetlb_dio.c
> > +++ b/tools/testing/selftests/mm/hugetlb_dio.c
> > @@ -22,12 +22,9 @@
> >  #include "kselftest.h"
> >  #include "hugepage_settings.h"
> >
> > -#ifndef STATX_DIOALIGN
> > -#define STATX_DIOALIGN		0x00002000U
> > -#endif
> > -
> >  static int get_dio_alignment(int fd)
> >  {
> > +#ifdef STATX_DIOALIGN
> >  	struct statx stx;
> >  	int ret;
> >
> > @@ -43,6 +40,9 @@ static int get_dio_alignment(int fd)
> >  		return 1;
> >
> >  	return stx.stx_dio_offset_align;
> > +#else
> > +	return -1;
> > +#endif
> 
> Probably better to declare different functions to make this less hideous.

I see your point.  will look for the other way.

-- Hajime

  reply	other threads:[~2026-08-14 22:29 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20260813063401.1786548-1-thehajime@gmail.com>
2026-08-13  6:33 ` [RFC PATCH 4/6] selftests: fix build errors on alpine linux Hajime Tazaki
2026-08-14  9:34   ` Pedro Falcato
2026-08-14 12:44     ` Hajime Tazaki
2026-08-14 12:39   ` Lorenzo Stoakes (ARM)
2026-08-14 22:29     ` Hajime Tazaki [this message]
2026-08-13  6:34 ` [RFC PATCH 5/6] selftests: run tests on nommu architecture Hajime Tazaki
2026-08-14 12:50   ` Lorenzo Stoakes (ARM)
2026-08-14 14:34     ` Mark Brown
2026-08-13  6:34 ` [RFC PATCH 6/6] selftests/mm: add nommu mmap and mremap behavior tests Hajime Tazaki
2026-08-14 13:28   ` Lorenzo Stoakes (ARM)
2026-08-14 22:35     ` Hajime Tazaki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m2y0e8pc8t.wl-thehajime@gmail.com \
    --to=thehajime@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=daniel@thingy.jp \
    --cc=david@kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=liam@infradead.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-um@lists.infradead.org \
    --cc=ljs@kernel.org \
    --cc=mhocko@suse.com \
    --cc=rppt@kernel.org \
    --cc=shuah@kernel.org \
    --cc=surenb@google.com \
    --cc=vbabka@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox