linux-leds.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Yauhen Kharuzhy <jekhor@gmail.com>,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org
Subject: Re: [PATCH v2 1/2] leds: Add Intel Cherry Trail Whiskey Cove PMIC LEDs
Date: Thu, 14 Feb 2019 11:04:44 +0100	[thread overview]
Message-ID: <079efdd4-2259-1e6f-48dd-5876f2bd7a93@redhat.com> (raw)
In-Reply-To: <1df39a63-533f-bb68-a056-a0241f148be9@redhat.com>

Hi,

On 13-02-19 23:43, Hans de Goede wrote:
> Hi,
> 
> On 12-02-19 21:59, Yauhen Kharuzhy wrote:
>> Add support for LEDs connected to the Intel Cherry Trail Whiskey Cove
>> PMIC. Charger and general-purpose leds are supported. Hardware blinking
>> is implemented, breathing is not.
>>
>> This driver was tested with Lenovo Yoga Book notebook.

<snip>

> Note that in my experience the "charging" mode only works
> when bits 0-1 have the value 10.

Ok, scrap that I don't know where this info in my notes
came from (probably user error), the power-on-reset
value for bits 0-1 is 00 and then the hw controls the
charging LED just fine. So your code is right, bit 0
switches between hw-control (0) and user-control (1) and
bit 1 is on/off when user-control is enabled.

Regards,

Hans

  parent reply	other threads:[~2019-02-14 10:04 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-12 20:58 [PATCH v2 0/2] Intel Cherry Trail Whiskey Cove LEDs support Yauhen Kharuzhy
2019-02-12 20:59 ` [PATCH v2 1/2] leds: Add Intel Cherry Trail Whiskey Cove PMIC LEDs Yauhen Kharuzhy
2019-02-13 22:43   ` Hans de Goede
2019-02-13 23:07     ` Pavel Machek
2019-02-13 23:25       ` Hans de Goede
2019-02-13 23:38         ` Pavel Machek
2019-02-14  9:57           ` Hans de Goede
2019-02-14 11:14             ` Pavel Machek
2019-02-14 11:31               ` Hans de Goede
2019-02-14 12:28                 ` Pavel Machek
2019-02-15 21:41                   ` Jacek Anaszewski
2019-02-15 23:26                     ` Pavel Machek
2019-02-14 21:46                 ` Jacek Anaszewski
2019-02-14 23:03                   ` Pavel Machek
2019-02-15  7:27                     ` Yauhen Kharuzhy
2019-02-15 21:43                       ` Jacek Anaszewski
2019-02-16 11:26                         ` Yauhen Kharuzhy
2019-02-15 11:27                     ` Hans de Goede
2019-02-15 13:02                       ` Pavel Machek
2019-02-15 21:42                       ` Jacek Anaszewski
2019-02-15 22:26                         ` Hans de Goede
2019-02-15 22:31                           ` Jacek Anaszewski
2019-02-15 23:14                             ` Hans de Goede
2019-02-16 17:02                               ` Jacek Anaszewski
2019-02-16 19:01                                 ` Hans de Goede
2019-02-16 19:37                                   ` Pavel Machek
2019-02-16 20:55                                     ` Hans de Goede
2019-02-17  0:08                                       ` Pavel Machek
2019-02-17 14:10                                         ` Hans de Goede
2019-02-17 17:45                                           ` Pavel Machek
2019-02-18 11:12                                             ` Hans de Goede
2019-02-18 21:59                                               ` Jacek Anaszewski
2019-02-16 21:54                                     ` Jacek Anaszewski
2019-02-16 22:03                                       ` Hans de Goede
2019-02-17 12:40                                         ` Jacek Anaszewski
2019-02-14 11:28             ` Pavel Machek
2019-02-14 21:34             ` Yauhen Kharuzhy
2019-02-14  6:55     ` Yauhen Kharuzhy
2019-02-14 10:04     ` Hans de Goede [this message]
2019-02-12 20:59 ` [PATCH v2 2/2] mfd: Add leds MFD cell for intel_soc_pmic_chtwc Yauhen Kharuzhy
2019-02-13 21:24   ` Jacek Anaszewski
2019-03-20  9:56   ` Lee Jones
2019-03-20  9:57     ` Lee Jones
2019-04-21 19:28 ` [PATCH v2 0/2] Intel Cherry Trail Whiskey Cove LEDs support Hans de Goede
2019-04-24 18:32   ` Yauhen Kharuzhy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=079efdd4-2259-1e6f-48dd-5876f2bd7a93@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=jekhor@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).