From: Simon Guinot <simon.guinot@sequanux.org>
To: Bryan Wu <cooloney@gmail.com>, Richard Purdie <rpurdie@rpsys.net>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org,
Vincent Donnefort <vdonnefort@gmail.com>
Subject: [PATCH 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards
Date: Mon, 23 Feb 2015 16:04:20 +0100 [thread overview]
Message-ID: <1424703861-20903-3-git-send-email-simon.guinot@sequanux.org> (raw)
In-Reply-To: <1424703861-20903-1-git-send-email-simon.guinot@sequanux.org>
This patch adds DT entries for the LEDs found on the Kirkwood-based
LaCie boards 2Big and 5Big Network v2.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++++++++++++++++++++++
arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++++++++++++++++++++++++++++
2 files changed, 140 insertions(+)
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
index 36155b749d9f..3cc5e469df06 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -86,6 +86,66 @@
clock-frequency = <32768>;
};
};
+
+ netxbig-leds {
+ blue-sata2 {
+ label = "netxbig:blue:sata2";
+ mode-addr = <5>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata2 {
+ label = "netxbig:red:sata2";
+ mode-addr = <5>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata3 {
+ label = "netxbig:blue:sata3";
+ mode-addr = <6>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata3 {
+ label = "netxbig:red:sata3";
+ mode-addr = <6>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata4 {
+ label = "netxbig:blue:sata4";
+ mode-addr = <7>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata4 {
+ label = "netxbig:red:sata4";
+ mode-addr = <7>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ };
};
&mdio {
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
index b0cfb7cd30b9..5e7ed1c7e1b2 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -13,6 +13,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <dt-bindings/leds/leds-netxbig.h>
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
@@ -105,6 +106,85 @@
gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
};
+
+ netxbig_gpio_ext: netxbig-gpio-ext {
+ compatible = "lacie,netxbig-gpio-ext";
+
+ addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+ &gpio1 16 GPIO_ACTIVE_HIGH
+ &gpio1 17 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH
+ &gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = <&netxbig_gpio_ext>;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ };
};
&mdio {
--
2.1.1
next prev parent reply other threads:[~2015-02-23 15:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-23 15:04 [PATCH 0/3] Add DT support for netxbig LEDs Simon Guinot
2015-02-23 15:04 ` [PATCH 1/3] leds: netxbig: add device tree binding Simon Guinot
2015-02-23 15:04 ` Simon Guinot [this message]
2015-02-23 15:04 ` [PATCH 3/3] ARM: mvebu: remove static LED setup for netxbig boards Simon Guinot
2015-03-09 9:41 ` [PATCH 0/3] Add DT support for netxbig LEDs Simon Guinot
2015-03-16 16:01 ` Gregory CLEMENT
2015-03-30 8:30 ` Simon Guinot
2015-03-30 12:30 ` Andrew Lunn
2015-03-30 13:22 ` Jason Cooper
2015-03-30 13:29 ` Gregory CLEMENT
2015-03-30 13:46 ` Jason Cooper
2015-03-30 14:20 ` Gregory CLEMENT
2015-03-23 10:31 ` Simon Guinot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424703861-20903-3-git-send-email-simon.guinot@sequanux.org \
--to=simon.guinot@sequanux.org \
--cc=andrew@lunn.ch \
--cc=cooloney@gmail.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-leds@vger.kernel.org \
--cc=rpurdie@rpsys.net \
--cc=sebastian.hesselbarth@gmail.com \
--cc=vdonnefort@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).