From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ingi Kim Subject: [PATCH v6 0/3] Add ktd2692 Flash LED driver using LED Flash class Date: Fri, 10 Apr 2015 15:45:56 +0900 Message-ID: <1428648359-23289-1-git-send-email-ingi2.kim@samsung.com> Return-path: Received: from mailout2.samsung.com ([203.254.224.25]:42015 "EHLO mailout2.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751954AbbDJGqE (ORCPT ); Fri, 10 Apr 2015 02:46:04 -0400 Sender: linux-leds-owner@vger.kernel.org List-Id: linux-leds@vger.kernel.org To: cooloney@gmail.com, rpurdie@rpsys.net, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org Cc: sakari.ailus@iki.fi, j.anaszewski@samsung.com, varkabhadram@gmail.com, joe@perches.com, sw0312.kim@samsung.com, cw00.choi@samsung.com, jh80.chung@samsung.com, ideal.song@samsung.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org This patch adds ktd2692 Flash LED driver with LED Flash class Change in v6: - Change goto label to if-else - Change DT binding style for LED device binding Change in v5: - Clean up the code - Fix help message of Kconfig - Fix issue related with regulator and mutex usage - Remove tab spaces in bindings Change in v4: - Clean up the code - Modify binding documentation of ktd2692 Change in v3: - Clean up the code - Add aux gpio pin to control Flash LED Change in v2: - Introduction of LED Flash class as Jacek's comment - Supplement of binding documentation - Rename gpio control pin and remove unused pin - Add regulator for the Flash LED Ingi Kim (3): of: Add vendor prefix for Kinetic technologies leds: ktd2692: add device tree bindings for ktd2692 leds: Add ktd2692 flash LED driver .../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/leds/Kconfig | 9 + drivers/leds/Makefile | 1 + drivers/leds/leds-ktd2692.c | 408 +++++++++++++++++++++ 5 files changed, 459 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt create mode 100644 drivers/leds/leds-ktd2692.c -- 2.0.5