Linux LED subsystem development
 help / color / mirror / Atom feed
From: Matt Ranostay <mranostay@gmail.com>
To: linux-leds@vger.kernel.org, devicetree@vger.kernel.org
Cc: Matt Ranostay <matt@ranostay.consulting>,
	Richard Purdie <rpurdie@rpsys.net>,
	Jacek Anaszewski <j.anaszewski@samsung.com>
Subject: [PATCH] leds: leds-pca963x: add nxp,leds-suspend property
Date: Tue,  4 Oct 2016 19:29:32 -0700	[thread overview]
Message-ID: <1475634572-18274-1-git-send-email-matt@ranostay.consulting> (raw)

Allow the LED subsystem to blank the LEDS on suspend.

Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
---
 Documentation/devicetree/bindings/leds/pca963x.txt | 1 +
 drivers/leds/leds-pca963x.c                        | 9 +++++++++
 include/linux/platform_data/leds-pca963x.h         | 6 ++++++
 3 files changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
index dafbe9931c2b..61b1f037ebd0 100644
--- a/Documentation/devicetree/bindings/leds/pca963x.txt
+++ b/Documentation/devicetree/bindings/leds/pca963x.txt
@@ -7,6 +7,7 @@ Optional properties:
 - nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
   to open-drain, newer chips to totem pole)
 - nxp,hw-blink : use hardware blinking instead of software blinking
+- nxp,leds-suspend : turn off LEDS on system suspend
 
 Each led is represented as a sub-node of the nxp,pca963x device.
 
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index 407eba11e187..9a347b94f1db 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -294,6 +294,12 @@ pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
 	else
 		pdata->blink_type = PCA963X_SW_BLINK;
 
+	/* default to turning off LEDs on suspend */
+	if (of_property_read_bool(np, "nxp,leds-suspend"))
+		pdata->suspend = PCA963X_LED_SUSPEND;
+	else
+		pdata->suspend = PCA963X_LED_RETAIN;
+
 	return pdata;
 }
 
@@ -386,6 +392,9 @@ static int pca963x_probe(struct i2c_client *client,
 		if (pdata && pdata->blink_type == PCA963X_HW_BLINK)
 			pca963x[i].led_cdev.blink_set = pca963x_blink_set;
 
+		if (pdata && pdata->suspend == PCA963X_LED_SUSPEND)
+			pca963x[i].led_cdev.flags = LED_CORE_SUSPENDRESUME;
+
 		err = led_classdev_register(&client->dev, &pca963x[i].led_cdev);
 		if (err < 0)
 			goto exit;
diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h
index e731f0036329..e5bad91e2fab 100644
--- a/include/linux/platform_data/leds-pca963x.h
+++ b/include/linux/platform_data/leds-pca963x.h
@@ -33,10 +33,16 @@ enum pca963x_blink_type {
 	PCA963X_HW_BLINK,
 };
 
+enum pca963x_suspend {
+	PCA963X_LED_RETAIN,
+	PCA963X_LED_SUSPEND,
+};
+
 struct pca963x_platform_data {
 	struct led_platform_data leds;
 	enum pca963x_outdrv outdrv;
 	enum pca963x_blink_type blink_type;
+	enum pca963x_suspend suspend;
 };
 
 #endif /* __LINUX_PCA963X_H*/
-- 
2.7.4

             reply	other threads:[~2016-10-05  2:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20161005022942eucas1p2b092723a0c38c116cc971971e43b169e@eucas1p2.samsung.com>
2016-10-05  2:29 ` Matt Ranostay [this message]
2016-10-05  8:09   ` [PATCH] leds: leds-pca963x: add nxp,leds-suspend property Jacek Anaszewski
2016-10-05 12:22     ` Rob Herring
2016-10-05 13:11       ` Jacek Anaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1475634572-18274-1-git-send-email-matt@ranostay.consulting \
    --to=mranostay@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=j.anaszewski@samsung.com \
    --cc=linux-leds@vger.kernel.org \
    --cc=matt@ranostay.consulting \
    --cc=rpurdie@rpsys.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox