[PATCH 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3

[PATCH 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3

[Luca Weiss]

Add support for the PMI632 PMIC in the spmi-gpio & qcom-lpg driver, add
the dtsi for the PMIC and enable the notification LED on fairphone-fp3.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Luca Weiss (8):
      dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
      pinctrl: qcom: spmi-gpio: Add PMI632 support
      dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block
      leds: qcom-lpg: Add support for PMI632 LPG
      dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling
      dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
      arm64: dts: qcom: Add PMI632 PMIC
      arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

 .../bindings/iio/adc/qcom,spmi-vadc.yaml           |   2 +-
 .../devicetree/bindings/leds/leds-qcom-lpg.yaml    |   1 +
 .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |   1 +
 .../bindings/pinctrl/qcom,pmic-gpio.yaml           |   2 +
 arch/arm64/boot/dts/qcom/pmi632.dtsi               | 165 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts  |  29 ++++
 drivers/leds/rgb/leds-qcom-lpg.c                   |  15 ++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c           |   1 +
 8 files changed, 215 insertions(+), 1 deletion(-)
---
base-commit: c83fb1e4acf528c29b0729525cf23544f8121b3d
change-id: 20230414-pmi632-4ae03225ae75

Best regards,
-- 
Luca Weiss <luca@z3ntu.xyz>

[PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632

[Luca Weiss]

Document the 8 GPIOs found on PMI632.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 1096655961f7..2179444b7a83 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -52,6 +52,7 @@ properties:
           - qcom,pm8994-gpio
           - qcom,pm8998-gpio
           - qcom,pma8084-gpio
+          - qcom,pmi632-gpio
           - qcom,pmi8950-gpio
           - qcom,pmi8994-gpio
           - qcom,pmi8998-gpio
@@ -434,6 +435,7 @@ $defs:
                  - gpio1-gpio22 for pm8994
                  - gpio1-gpio26 for pm8998
                  - gpio1-gpio22 for pma8084
+                 - gpio1-gpio8 for pmi632
                  - gpio1-gpio2 for pmi8950
                  - gpio1-gpio10 for pmi8994
                  - gpio1-gpio4 for pmk8350

-- 
2.40.0

Re: [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632

[Krzysztof Kozlowski]

On 14/04/2023 01:17, Luca Weiss wrote:
> Document the 8 GPIOs found on PMI632.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> index 1096655961f7..2179444b7a83 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> @@ -52,6 +52,7 @@ properties:
>            - qcom,pm8994-gpio
>            - qcom,pm8998-gpio
>            - qcom,pma8084-gpio
> +          - qcom,pmi632-gpio

You missed update to other places.

Best regards,
Krzysztof

[PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support

[Luca Weiss]

Add support for the 8 GPIOs found on PMI632.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index ea3485344f06..40cab13e5a83 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1232,6 +1232,7 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
 	{ .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
 	{ .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
+	{ .compatible = "qcom,pmi632-gpio", .data = (void *) 8 },
 	{ .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 },
 	{ .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
 	{ .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },

-- 
2.40.0

Re: [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support

[Konrad Dybcio]

On 14.04.2023 01:17, Luca Weiss wrote:
> Add support for the 8 GPIOs found on PMI632.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
As I've started doing more and more lately, I'll hijack this
patch to discuss the general approach..

I have a feeling that you'll get some comments about
this match list growing, especially since the driver data
is already filled in dt (gpio-ranges).. perhaps we can improve
this..

Especially considering the "qcom,spmi-gpio" fallback is there
(unless we care about 2015 DTs like 0804308fdd3c) that are
unlikely to still work nowadays. Old DTs also used interrupts=<>
to list out all the GPIOs (among the other SPMI fluff) individually
(see e.g. 5f540fb4821a).

Krzysztof, WDYT? Would it be worth taking all of that old junk into
account, or should we keep it as-is?

Konrad
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index ea3485344f06..40cab13e5a83 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -1232,6 +1232,7 @@ static const struct of_device_id pmic_gpio_of_match[] = {
>  	{ .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
>  	{ .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
>  	{ .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
> +	{ .compatible = "qcom,pmi632-gpio", .data = (void *) 8 },
>  	{ .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 },
>  	{ .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
>  	{ .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
> 

Re: [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support

[Linus Walleij]

On Fri, Apr 14, 2023 at 1:18 AM Luca Weiss <luca@z3ntu.xyz> wrote:

> Add support for the 8 GPIOs found on PMI632.
>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

This patch (2/8) applied as uncontroversial.

Yours,
Linus Walleij

[PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block

[Luca Weiss]

Document the availability of an LPG configuration for the PMI632 PMIC in
the Qualcomm Light Pulse Generator driver.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
index 1df837798249..2e4426894bed 100644
--- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -25,6 +25,7 @@ properties:
       - qcom,pm8941-lpg
       - qcom,pm8994-lpg
       - qcom,pmc8180c-lpg
+      - qcom,pmi632-lpg
       - qcom,pmi8994-lpg
       - qcom,pmi8998-lpg
 

-- 
2.40.0

Re: [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block

[Krzysztof Kozlowski]

On 14/04/2023 01:17, Luca Weiss wrote:
> Document the availability of an LPG configuration for the PMI632 PMIC in
> the Qualcomm Light Pulse Generator driver.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG

[Luca Weiss]

The PMI632 PMIC contains 5 PWM channels, 3 of which can be used for
LEDs.

For the LED pattern it doesn't have LUT like other PMICs but uses SDAM
instead. This is not currently implemented in the driver but since LPG
works fine without it, add support for the PMIC now.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/leds/rgb/leds-qcom-lpg.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 67f48f222109..51763ecb8c1e 100644
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -1353,6 +1353,20 @@ static const struct lpg_data pm8994_lpg_data = {
 	},
 };
 
+/* PMI632 uses SDAM instead of LUT for pattern */
+static const struct lpg_data pmi632_lpg_data = {
+	.triled_base = 0xd000,
+
+	.num_channels = 5,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb300, .triled_mask = BIT(7) },
+		{ .base = 0xb400, .triled_mask = BIT(6) },
+		{ .base = 0xb500, .triled_mask = BIT(5) },
+		{ .base = 0xb600 },
+		{ .base = 0xb700 },
+	},
+};
+
 static const struct lpg_data pmi8994_lpg_data = {
 	.lut_base = 0xb000,
 	.lut_size = 24,
@@ -1436,6 +1450,7 @@ static const struct of_device_id lpg_of_table[] = {
 	{ .compatible = "qcom,pm8916-pwm", .data = &pm8916_pwm_data },
 	{ .compatible = "qcom,pm8941-lpg", .data = &pm8941_lpg_data },
 	{ .compatible = "qcom,pm8994-lpg", .data = &pm8994_lpg_data },
+	{ .compatible = "qcom,pmi632-lpg", .data = &pmi632_lpg_data },
 	{ .compatible = "qcom,pmi8994-lpg", .data = &pmi8994_lpg_data },
 	{ .compatible = "qcom,pmi8998-lpg", .data = &pmi8998_lpg_data },
 	{ .compatible = "qcom,pmc8180c-lpg", .data = &pm8150l_lpg_data },

-- 
2.40.0

Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG

[Konrad Dybcio]

On 14.04.2023 01:17, Luca Weiss wrote:
> The PMI632 PMIC contains 5 PWM channels, 3 of which can be used for
> LEDs.
> 
> For the LED pattern it doesn't have LUT like other PMICs but uses SDAM
> instead. This is not currently implemented in the driver but since LPG
> works fine without it, add support for the PMIC now.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Matches everything i see in 4.19!

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  drivers/leds/rgb/leds-qcom-lpg.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
> index 67f48f222109..51763ecb8c1e 100644
> --- a/drivers/leds/rgb/leds-qcom-lpg.c
> +++ b/drivers/leds/rgb/leds-qcom-lpg.c
> @@ -1353,6 +1353,20 @@ static const struct lpg_data pm8994_lpg_data = {
>  	},
>  };
>  
> +/* PMI632 uses SDAM instead of LUT for pattern */
> +static const struct lpg_data pmi632_lpg_data = {
> +	.triled_base = 0xd000,
> +
> +	.num_channels = 5,
> +	.channels = (const struct lpg_channel_data[]) {
> +		{ .base = 0xb300, .triled_mask = BIT(7) },
> +		{ .base = 0xb400, .triled_mask = BIT(6) },
> +		{ .base = 0xb500, .triled_mask = BIT(5) },
> +		{ .base = 0xb600 },
> +		{ .base = 0xb700 },
> +	},
> +};
> +
>  static const struct lpg_data pmi8994_lpg_data = {
>  	.lut_base = 0xb000,
>  	.lut_size = 24,
> @@ -1436,6 +1450,7 @@ static const struct of_device_id lpg_of_table[] = {
>  	{ .compatible = "qcom,pm8916-pwm", .data = &pm8916_pwm_data },
>  	{ .compatible = "qcom,pm8941-lpg", .data = &pm8941_lpg_data },
>  	{ .compatible = "qcom,pm8994-lpg", .data = &pm8994_lpg_data },
> +	{ .compatible = "qcom,pmi632-lpg", .data = &pmi632_lpg_data },
>  	{ .compatible = "qcom,pmi8994-lpg", .data = &pmi8994_lpg_data },
>  	{ .compatible = "qcom,pmi8998-lpg", .data = &pmi8998_lpg_data },
>  	{ .compatible = "qcom,pmc8180c-lpg", .data = &pm8150l_lpg_data },
> 

Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 502 bytes --]

On Fri 2023-04-14 01:17:48, Luca Weiss wrote:
> The PMI632 PMIC contains 5 PWM channels, 3 of which can be used for
> LEDs.
> 
> For the LED pattern it doesn't have LUT like other PMICs but uses SDAM
> instead. This is not currently implemented in the driver but since LPG
> works fine without it, add support for the PMIC now.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

Acked-by: Pavel Machek <pavel@ucw.cz>


-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling

[Luca Weiss]

The channel ADC5_USB_IN_V_16 is using 1/16 pre-scaling on at least
pm7250b and pmi632. Allow that in the schema.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index bd6e0d6f6e0c..365aa3528a87 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -101,7 +101,7 @@ patternProperties:
         oneOf:
           - items:
               - const: 1
-              - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+              - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ]
           - items:
               - const: 10
               - const: 81

-- 
2.40.0

Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling

[Krzysztof Kozlowski]

On 14/04/2023 01:17, Luca Weiss wrote:
> The channel ADC5_USB_IN_V_16 is using 1/16 pre-scaling on at least
> pm7250b and pmi632. Allow that in the schema.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling

[Jonathan Cameron]

On Fri, 14 Apr 2023 09:56:07 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 14/04/2023 01:17, Luca Weiss wrote:
> > The channel ADC5_USB_IN_V_16 is using 1/16 pre-scaling on at least
> > pm7250b and pmi632. Allow that in the schema.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> >  Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >   
> 
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Best regards,
> Krzysztof
> 

Applied this patch to the IIO togreg branch initially pushed out as testing
for 0-day to poke at it.

I'm doubtful this one will make the upcoming merge window but seems unlikely
the rest will all make it either so that shouldn't be a problem.

Jonathan

[PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible

[Luca Weiss]

Document support for the pmi632, often found with the sdm632 SoC.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 84620ebc1efe..09e7195c622b 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -71,6 +71,7 @@ properties:
           - qcom,pm8998
           - qcom,pma8084
           - qcom,pmd9635
+          - qcom,pmi632
           - qcom,pmi8950
           - qcom,pmi8962
           - qcom,pmi8994

-- 
2.40.0

Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible

[Krzysztof Kozlowski]

On 14/04/2023 01:17, Luca Weiss wrote:
> Document support for the pmi632, often found with the sdm632 SoC.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 1 +

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 286 bytes --]

On Fri 2023-04-14 01:17:50, Luca Weiss wrote:
> Document support for the pmi632, often found with the sdm632 SoC.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

5,6: Acked-by: Pavel Machek <pavel@ucw.cz>

-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[PATCH 7/8] arm64: dts: qcom: Add PMI632 PMIC

[Luca Weiss]

The PMI632, commonly found on SoCs with SDM632 has various standard
functions like ADC, GPIOs, LPG and more.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm64/boot/dts/qcom/pmi632.dtsi | 165 +++++++++++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
new file mode 100644
index 000000000000..4eb79e0ce40a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmi632-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmi632_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pmi632", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi632_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmi632_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@7 {
+				reg = <ADC5_USB_IN_I>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_in_i_uv";
+			};
+
+			channel@8 {
+				reg = <ADC5_USB_IN_V_16>;
+				qcom,pre-scaling = <1 16>;
+				label = "usb_in_v_div_16";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+
+			channel@4b {
+				reg = <ADC5_BAT_ID_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				label = "bat_id";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@84 {
+				reg = <ADC5_VBAT_SNS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vbat_sns";
+			};
+		};
+
+		pmi632_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmi632_sdam_7: nvram@b600 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0xb600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xb600 0x100>;
+		};
+
+		pmi632_gpios: gpio@c000 {
+			compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi632_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi632", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi632_lpg: pwm {
+			compatible = "qcom,pmi632-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};

-- 
2.40.0

[PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

[Luca Weiss]

The phone features a notification LED connected to the pmi632. Configure
the RGB led found on it.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 29 +++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 70e683b7e4fc..301eca9a4f31 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -4,8 +4,10 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
 #include "sdm632.dtsi"
 #include "pm8953.dtsi"
+#include "pmi632.dtsi"
 
 / {
 	model = "Fairphone 3";
@@ -83,6 +85,33 @@ &pm8953_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&pmi632_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 	vmmc-supply = <&pm8953_l8>;

-- 
2.40.0

Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

[Konrad Dybcio]

On 14.04.2023 01:17, Luca Weiss wrote:
> The phone features a notification LED connected to the pmi632. Configure
> the RGB led found on it.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 29 +++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> index 70e683b7e4fc..301eca9a4f31 100644
> --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> @@ -4,8 +4,10 @@
>   */
>  /dts-v1/;
>  
> +#include <dt-bindings/leds/common.h>
>  #include "sdm632.dtsi"
>  #include "pm8953.dtsi"
> +#include "pmi632.dtsi"
>  
>  / {
>  	model = "Fairphone 3";
> @@ -83,6 +85,33 @@ &pm8953_resin {
>  	linux,code = <KEY_VOLUMEDOWN>;
>  };
>  
> +&pmi632_lpg {
qcom,power-source?

Konrad
> +	status = "okay";
> +
> +	multi-led {
> +		color = <LED_COLOR_ID_RGB>;
> +		function = LED_FUNCTION_STATUS;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		led@1 {
> +			reg = <1>;
> +			color = <LED_COLOR_ID_RED>;
> +		};
> +
> +		led@2 {
> +			reg = <2>;
> +			color = <LED_COLOR_ID_GREEN>;
> +		};
> +
> +		led@3 {
> +			reg = <3>;
> +			color = <LED_COLOR_ID_BLUE>;
> +		};
> +	};
> +};
> +
>  &sdhc_1 {
>  	status = "okay";
>  	vmmc-supply = <&pm8953_l8>;
> 

Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

[Luca Weiss]

On Freitag, 14. April 2023 01:36:38 CEST Konrad Dybcio wrote:
> On 14.04.2023 01:17, Luca Weiss wrote:
> > The phone features a notification LED connected to the pmi632. Configure
> > the RGB led found on it.
> > 
> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> > ---
> > 
> >  arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 29
> >  +++++++++++++++++++++++ 1 file changed, 29 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> > b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index
> > 70e683b7e4fc..301eca9a4f31 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> > +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
> > @@ -4,8 +4,10 @@
> > 
> >   */
> >  
> >  /dts-v1/;
> > 
> > +#include <dt-bindings/leds/common.h>
> > 
> >  #include "sdm632.dtsi"
> >  #include "pm8953.dtsi"
> > 
> > +#include "pmi632.dtsi"
> > 
> >  / {
> >  
> >  	model = "Fairphone 3";
> > 
> > @@ -83,6 +85,33 @@ &pm8953_resin {
> > 
> >  	linux,code = <KEY_VOLUMEDOWN>;
> >  
> >  };
> > 
> > +&pmi632_lpg {
> 
> qcom,power-source?

This property is only used if triled_has_src_sel is set in the driver (which 
it isn't on pmi632), only on pm8941 & pmi8994 it is set.

Regards
Luca

> 
> Konrad
> 
> > +	status = "okay";
> > +
> > +	multi-led {
> > +		color = <LED_COLOR_ID_RGB>;
> > +		function = LED_FUNCTION_STATUS;
> > +
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		led@1 {
> > +			reg = <1>;
> > +			color = <LED_COLOR_ID_RED>;
> > +		};
> > +
> > +		led@2 {
> > +			reg = <2>;
> > +			color = <LED_COLOR_ID_GREEN>;
> > +		};
> > +
> > +		led@3 {
> > +			reg = <3>;
> > +			color = <LED_COLOR_ID_BLUE>;
> > +		};
> > +	};
> > +};
> > +
> > 
> >  &sdhc_1 {
> >  
> >  	status = "okay";
> >  	vmmc-supply = <&pm8953_l8>;

Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 403 bytes --]

On Fri 2023-04-14 01:17:52, Luca Weiss wrote:
> The phone features a notification LED connected to the pmi632. Configure
> the RGB led found on it.

Could you document the usage in Documentation/leds/well-known-leds.txt
so that all phones share the same name for the RGB notification LED?

Thanks,
								Pavel
								
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

[Luca Weiss]

On Freitag, 14. April 2023 14:24:06 CEST Pavel Machek wrote:
> On Fri 2023-04-14 01:17:52, Luca Weiss wrote:
> > The phone features a notification LED connected to the pmi632. Configure
> > the RGB led found on it.
> 
> Could you document the usage in Documentation/leds/well-known-leds.txt
> so that all phones share the same name for the RGB notification LED?

This dts results in /sys/class/leds/rgb:status like (presumably) all of these 
existing in-tree users:
* qcom-msm8974-lge-nexus5-hammerhead.dts
* qcom-msm8974-sony-xperia-rhine.dtsi
* qcom-msm8974pro-fairphone-fp2.dts
* qcom-msm8974pro-sony-xperia-shinano-castor.dts
* freescale/imx8mq-librem5.dtsi
* qcom/msm8996-xiaomi-common.dtsi
* qcom/sdm630-sony-xperia-nile.dtsi
* qcom/sdm845-shift-axolotl.dts

However I can send a patch adding it to this txt doc since it doesn't seem to 
be there yet.

Regards
Luca

> 
> Thanks,
> 								
Pavel