Re: [ISSUE] Memleak in LED sysfs on heavy usage

[Greg KH <greg@kroah.com>]

On Fri, Sep 16, 2016 at 08:49:44PM +0200, Jacek Anaszewski wrote:
> On 09/16/2016 04:39 PM, Greg KH wrote:
> > On Fri, Sep 16, 2016 at 04:32:39PM +0200, Jacek Anaszewski wrote:
> > > On 09/16/2016 04:06 PM, Greg KH wrote:
> > > > On Fri, Sep 16, 2016 at 03:41:09PM +0200, Jacek Anaszewski wrote:
> > > > > On 09/16/2016 02:08 PM, Daniel Gorsulowski wrote:
> > > > > > Hi Jacek,
> > > > > > 
> > > > > > Am 16.09.2016 um 13:25 schrieb Jacek Anaszewski:
> > > > > > > On 09/16/2016 10:15 AM, Daniel Gorsulowski wrote:
> > > > > > > > Hi Jacek,
> > > > > > > > 
> > > > > > > > Am 16.09.2016 um 09:31 schrieb Jacek Anaszewski:
> > > > > > > > > Hi Daniel,
> > > > > > > > > 
> > > > > > > > > On 09/12/2016 10:50 AM, Daniel Gorsulowski wrote:
> > > > > > > > > > Hello!
> > > > > > > > > > 
> > > > > > > > > > Please consider if I made something wrong, sending this issue. This is
> > > > > > > > > > my first contact to the LKML.
> > > > > > > > > > By mistake, I accessed an LED via /sys/class/leds subsystem very
> > > > > > > > > > fast in
> > > > > > > > > > an user application. I figured out, that the free user memory
> > > > > > > > > > decreased
> > > > > > > > > > constantly. So I tried to analyze the Problem and wrote a litte
> > > > > > > > > > script:
> > > > > > > > > > 
> > > > > > > > > > #!/bin/sh
> > > > > > > > > > while [ 1 ]; do
> > > > > > > > > >         echo 1 > /sys/class/leds/2a_service_yellow/brightness
> > > > > > > > > >         echo 0 > /sys/class/leds/2a_service_yellow/brightness
> > > > > > > > > > done
> > > > > > > > > > 
> > > > > > > > > > And voila, I was able to reproduce the problem.
> > > > > > > > > > So I add a bit more debugging:
> > > > > > > > > > 
> > > > > > > > > > #!/bin/sh
> > > > > > > > > > cnt=0
> > > > > > > > > > while [ 1 ]; do
> > > > > > > > > >         if [ `expr $cnt % 1000` -eq 0 ]; then
> > > > > > > > > >                 free | grep Mem: | cut -d' ' -f25
> > > > > > > > > >         fi
> > > > > > > > > >         echo 1 > /sys/class/leds/2a_service_yellow/brightness
> > > > > > > > > >         echo 0 > /sys/class/leds/2a_service_yellow/brightness
> > > > > > > > > >         let "cnt++"
> > > > > > > > > > done
> > > > > > > > > > 
> > > > > > > > > > And huh? No memory is eaten anymore. So it looks like, the problem
> > > > > > > > > > only
> > > > > > > > > > occours on heavy (fast) usage of /sys/class/leds subsystem.
> > > > > > > > > > 
> > > > > > > > > > I rewrote the script and toggled a GPIO pin, but there was no problem
> > > > > > > > > > recognizable.
> > > > > > > > > 
> > > > > > > > > I've been unable to reproduce the problem with leds-aat1290 driver
> > > > > > > > > and Samsung M0 board. It must be driver specific issue.
> > > > > > > > > What driver did you use?
> > > > > > > > > 
> > > > > > > > I defined LEDS_GPIO and so I'm using leds-gpio driver.
> > > > > > > > danielg@debby:~/opt/prj/ti-linux-kernel$ cat .config | grep LEDS | grep
> > > > > > > > -v "^# "
> > > > > > > > CONFIG_INPUT_LEDS=y
> > > > > > > > CONFIG_NEW_LEDS=y
> > > > > > > > CONFIG_LEDS_CLASS=y
> > > > > > > > CONFIG_LEDS_GPIO=y
> > > > > > > > CONFIG_LEDS_TRIGGERS=y
> > > > > > > > CONFIG_LEDS_TRIGGER_TIMER=y
> > > > > > > > CONFIG_LEDS_TRIGGER_ONESHOT=y
> > > > > > > > CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> > > > > > > > CONFIG_LEDS_TRIGGER_GPIO=y
> > > > > > > > CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> > > > > > > > CONFIG_LEDS_TRIGGER_TRANSIENT=y
> > > > > > > > 
> > > > > > > 
> > > > > > > Unfortunately I am still unable to reproduce the problem with leds-gpio.
> > > > > > > I'm not observing any heavy usage with your test case:
> > > > > > > 
> > > > > > > ~#free
> > > > > > >               total       used       free     shared    buffers
> > > > > > > cached
> > > > > > > Mem:       1028092      61364     966728          0       8416      22396
> > > > > > > -/+ buffers/cache:      30552     997540
> > > > > > > Swap:            0          0          0
> > > > > > > 
> > > > > > > 
> > > > > > > Actually you didn't give any numbers. What kernel version are you using?
> > > > > > > 
> > > > > > As I wrote, the problems occurred in vanilla 4.6 kernel, but also in 4.4
> > > > > > kernel (with PREEMPT-RT Patchset).
> > > > > 
> > > > > Heh, funny coincidence. I was testing this on recent linux-leds.git,
> > > > > for-next branch and was not able to detect the issue. It started to
> > > > > appear after resetting HEAD to 4.8-rc2 base. Finally it turned out
> > > > > that what fixes the issue is the most recent commit [1].
> > > > > 
> > > > > Further investigation revealed that this is kobject_uevent_env(),
> > > > > called from led_trigger_set(), which causes memory leaks when called
> > > > > with high frequency.
> > > > 
> > > > Really?  Where in kobject_uevent_env() is the memory leak?
> > > 
> > > I'll chase it down when and will let you know. This may be
> > > non-trivial issue as it suffices to add "sleep 0.1" between
> > > brightness setting operations to prevent it.
> > 
> > Why are you abusing uevents for flashing an LED?  Please don't do that,
> > it's not what that interface is for at all.
> 
> It is called in a result of setting brightness value to LED_OFF,
> which also removes registered trigger if any.

So every time the LED goes off a uevent happens?  That's not a good
design.

> The rationale for calling kobject_uevent_env() is given in the
> relevant commit message:
> 
> commit 52c47742f79d9240f90af9a6722fe8bb3fa8c0f9
> Author: Colin Cross <ccross@android.com>
> Date:   Mon Aug 27 09:31:49 2012 +0800
> 
>     leds: triggers: send uevent when changing triggers
> 
>     Some triggers create sysfs files when they are enabled. Send a uevent
>     "change" notification whenever the trigger is changed to allow userspace
>     processes such as udev to modify permissions on the new files.
> 
>     A change notification will also be sent during registration of led class
>     devices or led triggers if the default trigger of an led class device
>     is found.

If a sysfs file is removed, then I could see a change event being ok.
But that's not what this patch does, it ALWAYS sends a uevent, even if
nothing changed!

Please fix that, otherwise you are going to really annoy userspace tools
with this.

But even then, I don't see how the uevent code has a memory leak with
this, do you?  And why aren't you checking the return value of
kobject_uevent_env()?

thanks,

greg k-h