[PATCH] led: core: Fix brightness setting when setting active_off=0

[Matthieu CASTET <matthieu.castet@parrot.com>]

With the current code, the following sequence won't work :
echo timer > trigger

echo 0 >  delay_off
* at this point we call
** led_delay_off_store
** led_blink_set
*** stop timer
** led_blink_setup
** led_set_software_blink
*** if !delay_on, led off
*** if !delay_off, set led_set_brightness_nosleep <--- LED_BLINK_SW is set but timer is stop
*** otherwise start timer/set LED_BLINK_SW flag

echo xxx > brightness
* led_set_brightness
** if LED_BLINK_SW
*** if brightness=0, led off
*** else apply brightness if next timer <--- timer is stop, and will never apply new setting
** otherwise set led_set_brightness_nosleep

To fix that, when we delete the timer, we should clear LED_BLINK_SW.

Cc: linux-leds@vger.kernel.org
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
---
 drivers/leds/led-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index fd83c7f77a95..f3654fd2eaf3 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -186,7 +186,7 @@ void led_blink_set(struct led_classdev *led_cdev,
 		   unsigned long *delay_on,
 		   unsigned long *delay_off)
 {
-	del_timer_sync(&led_cdev->blink_timer);
+	led_stop_software_blink(led_cdev);
 
 	clear_bit(LED_BLINK_ONESHOT, &led_cdev->work_flags);
 	clear_bit(LED_BLINK_ONESHOT_STOP, &led_cdev->work_flags);
-- 
2.15.0