[PATCH v6 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie

[Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>]

The minnie devices comes with an AUO B101EAN01 panel which is different
from default veyron devices, thus the power on/off timing sequence is
slightly different. The datasheet specifies a pwm delay of 200 ms, so
update the PMW delay proprieties accordingly.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Acked-by: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>
---
Changes since v5:
 - None.
Changes since v4:
 - Rebase on top of mainline.
Changes since v3:
 - Use new -ms names for proprieties.
 - Fix the delay, should be 200ms instead of 20ms (Pavel)
Changes since v2:
 - Use new names for proprieties.
Changes since v1:
 - Add this new patch as minnie has differents timings
---
 arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 544de6027aaa..4c5307e62001 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -123,6 +123,8 @@
 			240 241 242 243 244 245 246 247
 			248 249 250 251 252 253 254 255>;
 	power-supply = <&backlight_regulator>;
+	post-pwm-on-delay-ms = <200>;
+	pwm-off-delay-ms = <200>;
 };
 
 &emmc {
-- 
2.16.2