From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dan Murphy Subject: [PATCH v4 1/7] dt-bindings: mfd: LMU: Fix lm3632 dt binding example Date: Mon, 6 May 2019 14:16:08 -0500 Message-ID: <20190506191614.25051-2-dmurphy@ti.com> References: <20190506191614.25051-1-dmurphy@ti.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190506191614.25051-1-dmurphy@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: jacek.anaszewski@gmail.com, pavel@ucw.cz Cc: lee.jones@linaro.org, rdunlap@infradead.org, linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Murphy , Rob Herring List-Id: linux-leds@vger.kernel.org Fix the lm3632 dt binding examples as the LCM enable GPIOs are defined as enable GPIOs per the regulator/lm363x-regulator.txt bindings document. Reviewed-by: Rob Herring Signed-off-by: Dan Murphy --- v4 - No changes - https://lore.kernel.org/patchwork/patch/1068613/ v3 - No changes added Reviewed-by Rob - https://lore.kernel.org/patchwork/patch/1058757/ v2 - There was no v2 I add this patch on top of this series Documentation/devicetree/bindings/mfd/ti-lmu.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index 980394d701a7..86ca786d54fc 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -104,8 +104,8 @@ lm3632@11 { regulators { compatible = "ti,lm363x-regulator"; - ti,lcm-en1-gpio = <&pioC 0 GPIO_ACTIVE_HIGH>; /* PC0 */ - ti,lcm-en2-gpio = <&pioC 1 GPIO_ACTIVE_HIGH>; /* PC1 */ + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; vboost { regulator-name = "lcd_boost"; -- 2.21.0.5.gaeb582a983