From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dan Murphy Subject: [RESEND PATCH v4 1/6] regulator: lm363x: Make the gpio register enable flexible Date: Wed, 22 May 2019 14:27:28 -0500 Message-ID: <20190522192733.13422-2-dmurphy@ti.com> References: <20190522192733.13422-1-dmurphy@ti.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190522192733.13422-1-dmurphy@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: jacek.anaszewski@gmail.com, pavel@ucw.cz, broonie@kernel.org, lgirdwood@gmail.com Cc: lee.jones@linaro.org, linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org, Dan Murphy List-Id: linux-leds@vger.kernel.org The use of and enablement of the GPIO can be used across devices. Use the enable_reg in the regulator descriptor for the register to write. Signed-off-by: Dan Murphy --- drivers/regulator/lm363x-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c index c876e161052a..382b1cecdd93 100644 --- a/drivers/regulator/lm363x-regulator.c +++ b/drivers/regulator/lm363x-regulator.c @@ -263,8 +263,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev) if (gpiod) { cfg.ena_gpiod = gpiod; - - ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG, + ret = regmap_update_bits(regmap, + lm363x_regulator_desc[id].enable_reg, LM3632_EXT_EN_MASK, LM3632_EXT_EN_MASK); if (ret) { -- 2.21.0.5.gaeb582a983