* [PATCH 5.14 032/151] ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe
[not found] <20211011134517.833565002@linuxfoundation.org>
@ 2021-10-11 13:45 ` Greg Kroah-Hartman
0 siblings, 0 replies; only message in thread
From: Greg Kroah-Hartman @ 2021-10-11 13:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, linux-leds, Michal Vokáč,
Pavel Machek, Fabio Estevam, Shawn Guo
From: Michal Vokáč <michal.vokac@ysoft.com>
commit 9b663b34c94a78f39fa2c7a8271b1f828b546e16 upstream.
Since the LED multicolor framework support was added in commit
92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Author of the framework attempted to accommodate this DT to the
framework in commit b86d3d21cd4c ("ARM: dts: imx6dl-yapp4: Add reg property
to the lp5562 channel node") but that is not sufficient. A color property
is now required even if the multicolor framework is not used, otherwise
the driver probe fails:
lp5562: probe of 1-0030 failed with error -22
Add the color property to fix this.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: <stable@vger.kernel.org>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@@ -277,6 +278,7 @@
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <0>;
+ color = <LED_COLOR_ID_RED>;
};
chan@1 {
@@ -284,6 +286,7 @@
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
};
chan@2 {
@@ -291,6 +294,7 @@
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
};
chan@3 {
@@ -298,6 +302,7 @@
led-cur = /bits/ 8 <0x0>;
max-cur = /bits/ 8 <0x0>;
reg = <3>;
+ color = <LED_COLOR_ID_WHITE>;
};
};
^ permalink raw reply [flat|nested] only message in thread