Linux LED subsystem development
 help / color / mirror / Atom feed
From: Alexandre Mergnat <amergnat@baylibre.com>
To: Mark Brown <broonie@kernel.org>,
	Tianping Fang <tianping.fang@mediatek.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Fabien Parent <fabien.parent@linaro.org>,
	Lee Jones <lee@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Chen Zhong <chen.zhong@mediatek.com>, Pavel Machek <pavel@ucw.cz>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Flora Fu <flora.fu@mediatek.com>,
	Liam Girdwood <lgirdwood@gmail.com>
Cc: Alexandre Mergnat <amergnat@baylibre.com>,
	Mattijs Korpershoek <mkorpershoek@baylibre.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	linux-rtc@vger.kernel.org, linux-leds@vger.kernel.org,
	Rob Herring <robh@kernel.org>,
	devicetree@vger.kernel.org, Fabien Parent <fparent@baylibre.com>,
	linux-input@vger.kernel.org, linux-mediatek@lists.infradead.org,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v8 2/6] dt-bindings: soc: mediatek: convert pwrap documentation
Date: Mon, 02 Jan 2023 17:06:03 +0100	[thread overview]
Message-ID: <20221005-mt6357-support-v8-2-560caaafee53@baylibre.com> (raw)
In-Reply-To: <20221005-mt6357-support-v8-0-560caaafee53@baylibre.com>

- Convert soc/mediatek/pwrap.txt to soc/mediatek/mediatek,pwrap.yaml
- Add syscon compatible const for mt8186 and mt8195 to match the DTS needs,
  which is missing from pwrap.txt.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
 .../devicetree/bindings/leds/leds-mt6323.txt       |   2 +-
 Documentation/devicetree/bindings/mfd/mt6397.txt   |   2 +-
 .../bindings/soc/mediatek/mediatek,pwrap.yaml      | 147 +++++++++++++++++++++
 .../devicetree/bindings/soc/mediatek/pwrap.txt     |  75 -----------
 4 files changed, 149 insertions(+), 77 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
index 45bf9f7d85f3..73353692efa1 100644
--- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -9,7 +9,7 @@ MT6323 PMIC hardware.
 For MT6323 MFD bindings see:
 Documentation/devicetree/bindings/mfd/mt6397.txt
 For MediaTek PMIC wrapper bindings see:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
 
 Required properties:
 - compatible : Must be "mediatek,mt6323-led"
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 0088442efca1..33b3d39d4ddd 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -13,7 +13,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-../soc/mediatek/pwrap.txt
+../soc/mediatek/mediatek,pwrap.yaml
 
 This document describes the binding for MFD device and its sub module.
 
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
new file mode 100644
index 000000000000..3fefd634bc69
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PMIC Wrapper
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description:
+  On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+  is not directly visible to the CPU, but only through the PMIC wrapper
+  inside the SoC. The communication between the SoC and the PMIC can
+  optionally be encrypted. Also a non standard Dual IO SPI mode can be
+  used to increase speed.
+
+  IP Pairing
+
+  On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+  The signals of these pins are routed over the SPI bus using the pwrap
+  bridge. In the binding description below the properties needed for bridging
+  are marked with "IP Pairing". These are optional on SoCs which do not support
+  IP Pairing
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-pwrap
+              - mediatek,mt6765-pwrap
+              - mediatek,mt6779-pwrap
+              - mediatek,mt6797-pwrap
+              - mediatek,mt6873-pwrap
+              - mediatek,mt7622-pwrap
+              - mediatek,mt8135-pwrap
+              - mediatek,mt8173-pwrap
+              - mediatek,mt8183-pwrap
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8188-pwrap
+              - mediatek,mt8195-pwrap
+              - mediatek,mt8365-pwrap
+              - mediatek,mt8516-pwrap
+      - items:
+          - enum:
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8195-pwrap
+          - const: syscon
+
+  reg:
+    minItems: 1
+    items:
+      - description: PMIC wrapper registers
+      - description: IP pairing registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SPI bus clock
+      - description: Main module clock
+      - description: System module clock
+      - description: Timer module clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: spi
+      - const: wrap
+      - const: sys
+      - const: tmr
+
+  resets:
+    minItems: 1
+    items:
+      - description: PMIC wrapper reset
+      - description: IP pairing reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  pmic:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+dependentRequired:
+  resets: [reset-names]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8365-pwrap
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/mt8135-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pwrap@1000f000 {
+            compatible = "mediatek,mt8135-pwrap";
+            reg = <0 0x1000f000 0 0x1000>,
+                  <0 0x11017000 0 0x1000>;
+            reg-names = "pwrap", "pwrap-bridge";
+            interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk26m>, <&clk26m>;
+            clock-names = "spi", "wrap";
+            resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+                     <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+            reset-names = "pwrap", "pwrap-bridge";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
deleted file mode 100644
index 12e4b4260b40..000000000000
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-MediaTek PMIC Wrapper Driver
-
-This document describes the binding for the MediaTek PMIC wrapper.
-
-On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
-is not directly visible to the CPU, but only through the PMIC wrapper
-inside the SoC. The communication between the SoC and the PMIC can
-optionally be encrypted. Also a non standard Dual IO SPI mode can be
-used to increase speed.
-
-IP Pairing
-
-on MT8135 the pins of some SoC internal peripherals can be on the PMIC.
-The signals of these pins are routed over the SPI bus using the pwrap
-bridge. In the binding description below the properties needed for bridging
-are marked with "IP Pairing". These are optional on SoCs which do not support
-IP Pairing
-
-Required properties in pwrap device node.
-- compatible:
-	"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
-	"mediatek,mt6765-pwrap" for MT6765 SoCs
-	"mediatek,mt6779-pwrap" for MT6779 SoCs
-	"mediatek,mt6797-pwrap" for MT6797 SoCs
-	"mediatek,mt6873-pwrap" for MT6873/8192 SoCs
-	"mediatek,mt7622-pwrap" for MT7622 SoCs
-	"mediatek,mt8135-pwrap" for MT8135 SoCs
-	"mediatek,mt8173-pwrap" for MT8173 SoCs
-	"mediatek,mt8183-pwrap" for MT8183 SoCs
-	"mediatek,mt8186-pwrap" for MT8186 SoCs
-	"mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
-	"mediatek,mt8195-pwrap" for MT8195 SoCs
-	"mediatek,mt8365-pwrap" for MT8365 SoCs
-	"mediatek,mt8516-pwrap" for MT8516 SoCs
-- interrupts: IRQ for pwrap in SOC
-- reg-names: "pwrap" is required; "pwrap-bridge" is optional.
-  "pwrap": Main registers base
-  "pwrap-bridge": bridge base (IP Pairing)
-- reg: Must contain an entry for each entry in reg-names.
-- clock-names: Must include the following entries:
-  "spi": SPI bus clock
-  "wrap": Main module clock
-  "sys": Optional system module clock
-  "tmr": Optional timer module clock
-- clocks: Must contain an entry for each entry in clock-names.
-
-Optional properities:
-- reset-names: Some SoCs include the following entries:
-  "pwrap"
-  "pwrap-bridge" (IP Pairing)
-- resets: Must contain an entry for each entry in reset-names.
-- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
-  See the following for child node definitions:
-  Documentation/devicetree/bindings/mfd/mt6397.txt
-  or the regulator-only device as the child device of pwrap, such as MT6380.
-  See the following definitions for such kinds of devices.
-  Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
-
-Example:
-	pwrap: pwrap@1000f000 {
-		compatible = "mediatek,mt8135-pwrap";
-		reg = <0 0x1000f000 0 0x1000>,
-			<0 0x11017000 0 0x1000>;
-		reg-names = "pwrap", "pwrap-bridge";
-		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
-				<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
-		reset-names = "pwrap", "pwrap-bridge";
-		clocks = <&clk26m>, <&clk26m>;
-		clock-names = "spi", "wrap";
-
-		pmic {
-			compatible = "mediatek,mt6397";
-		};
-	};

-- 
b4 0.10.1

  parent reply	other threads:[~2023-01-02 16:07 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-02 16:06 [PATCH v8 0/6] Add MediaTek MT6357 PMIC support Alexandre Mergnat
2023-01-02 16:06 ` [PATCH v8 1/6] dt-bindings: input: mtk-pmic-keys: add binding for MT6357 PMIC Alexandre Mergnat
2023-01-02 16:06 ` Alexandre Mergnat [this message]
2023-01-02 16:06 ` [PATCH v8 3/6] dt-bindings: mfd: mediatek: Add bindings " Alexandre Mergnat
2023-01-02 16:06 ` [PATCH v8 4/6] arm64: dts: mt6358: change node names Alexandre Mergnat
2023-01-03 10:13   ` AngeloGioacchino Del Regno
2023-01-02 16:06 ` [PATCH v8 5/6] arm64: dts: mt8173: change node name Alexandre Mergnat
2023-01-03 10:13   ` AngeloGioacchino Del Regno
2023-01-02 16:06 ` [PATCH v8 6/6] Input: mtk-pmic-keys: add MT6357 support Alexandre Mergnat
2023-01-19 17:27 ` [PATCH v8 0/6] Add MediaTek MT6357 PMIC support Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221005-mt6357-support-v8-2-560caaafee53@baylibre.com \
    --to=amergnat@baylibre.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=broonie@kernel.org \
    --cc=chen.zhong@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=fabien.parent@linaro.org \
    --cc=flora.fu@mediatek.com \
    --cc=fparent@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mkorpershoek@baylibre.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=tianping.fang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox