Linux LED subsystem development
 help / color / mirror / Atom feed
From: Henning Schild <henning.schild@siemens.com>
To: Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>,
	Hans de Goede <hdegoede@redhat.com>,
	Mark Gross <markgross@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	<linux-kernel@vger.kernel.org>, <linux-leds@vger.kernel.org>,
	<platform-driver-x86@vger.kernel.org>
Cc: Henning Schild <henning.schild@siemens.com>
Subject: [PATCH 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table
Date: Tue, 21 Feb 2023 13:24:12 +0100	[thread overview]
Message-ID: <20230221122414.24874-2-henning.schild@siemens.com> (raw)
In-Reply-To: <20230221122414.24874-1-henning.schild@siemens.com>

There are two special pins needed to init the LEDs. We used to have them
at the end of the gpiod_lookup table to give to "leds-gpio". A cleaner
way is to have a dedicated table for the special pins.

Signed-off-by: Henning Schild <henning.schild@siemens.com>
---
 drivers/leds/simple/simatic-ipc-leds-gpio.c | 26 ++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c
index e8d329b5a68c..ba0f24638af5 100644
--- a/drivers/leds/simple/simatic-ipc-leds-gpio.c
+++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c
@@ -16,6 +16,7 @@
 #include <linux/platform_data/x86/simatic-ipc-base.h>
 
 static struct gpiod_lookup_table *simatic_ipc_led_gpio_table;
+static struct gpiod_lookup_table *simatic_ipc_led_gpio_table_extra;
 
 static struct gpiod_lookup_table simatic_ipc_led_gpio_table_127e = {
 	.dev_id = "leds-gpio",
@@ -26,6 +27,12 @@ static struct gpiod_lookup_table simatic_ipc_led_gpio_table_127e = {
 		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 58, NULL, 3, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 60, NULL, 4, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 51, NULL, 5, GPIO_ACTIVE_LOW),
+	},
+};
+
+static struct gpiod_lookup_table simatic_ipc_led_gpio_table_127e_extra = {
+	.dev_id = NULL,
+	.table = {
 		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 56, NULL, 6, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 59, NULL, 7, GPIO_ACTIVE_HIGH),
 	},
@@ -40,9 +47,15 @@ static struct gpiod_lookup_table simatic_ipc_led_gpio_table_227g = {
 		GPIO_LOOKUP_IDX("gpio-f7188x-2", 3, NULL, 3, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("gpio-f7188x-2", 4, NULL, 4, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("gpio-f7188x-2", 5, NULL, 5, GPIO_ACTIVE_LOW),
+	},
+};
+
+static struct gpiod_lookup_table simatic_ipc_led_gpio_table_227g_extra = {
+	.dev_id = NULL,
+	.table = {
 		GPIO_LOOKUP_IDX("gpio-f7188x-3", 6, NULL, 6, GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP_IDX("gpio-f7188x-3", 7, NULL, 7, GPIO_ACTIVE_HIGH),
-	}
+	},
 };
 
 static const struct gpio_led simatic_ipc_gpio_leds[] = {
@@ -64,6 +77,7 @@ static struct platform_device *simatic_leds_pdev;
 static int simatic_ipc_leds_gpio_remove(struct platform_device *pdev)
 {
 	gpiod_remove_lookup_table(simatic_ipc_led_gpio_table);
+	gpiod_remove_lookup_table(simatic_ipc_led_gpio_table_extra);
 	platform_device_unregister(simatic_leds_pdev);
 
 	return 0;
@@ -72,6 +86,7 @@ static int simatic_ipc_leds_gpio_remove(struct platform_device *pdev)
 static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
 {
 	const struct simatic_ipc_platform *plat = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
 	struct gpio_desc *gpiod;
 	int err;
 
@@ -80,12 +95,14 @@ static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
 		if (!IS_ENABLED(CONFIG_PINCTRL_BROXTON))
 			return -ENODEV;
 		simatic_ipc_led_gpio_table = &simatic_ipc_led_gpio_table_127e;
+		simatic_ipc_led_gpio_table_extra = &simatic_ipc_led_gpio_table_127e_extra;
 		break;
 	case SIMATIC_IPC_DEVICE_227G:
 		if (!IS_ENABLED(CONFIG_GPIO_F7188X))
 			return -ENODEV;
 		request_module("gpio-f7188x");
 		simatic_ipc_led_gpio_table = &simatic_ipc_led_gpio_table_227g;
+		simatic_ipc_led_gpio_table_extra = &simatic_ipc_led_gpio_table_227g_extra;
 		break;
 	default:
 		return -ENODEV;
@@ -101,8 +118,11 @@ static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
 		goto out;
 	}
 
+	simatic_ipc_led_gpio_table_extra->dev_id = dev_name(dev);
+	gpiod_add_lookup_table(simatic_ipc_led_gpio_table_extra);
+
 	/* PM_BIOS_BOOT_N */
-	gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 6, GPIOD_OUT_LOW);
+	gpiod = gpiod_get_index(dev, NULL, 6, GPIOD_OUT_LOW);
 	if (IS_ERR(gpiod)) {
 		err = PTR_ERR(gpiod);
 		goto out;
@@ -110,7 +130,7 @@ static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
 	gpiod_put(gpiod);
 
 	/* PM_WDT_OUT */
-	gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 7, GPIOD_OUT_LOW);
+	gpiod = gpiod_get_index(dev, NULL, 7, GPIOD_OUT_LOW);
 	if (IS_ERR(gpiod)) {
 		err = PTR_ERR(gpiod);
 		goto out;
-- 
2.39.2


  reply	other threads:[~2023-02-21 12:24 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-21 12:24 [PATCH 0/3] leds: simatic-ipc-leds-gpio: split up Henning Schild
2023-02-21 12:24 ` Henning Schild [this message]
2023-02-21 13:45   ` [PATCH 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table Andy Shevchenko
2023-02-21 12:24 ` [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers Henning Schild
2023-02-21 13:51   ` Andy Shevchenko
2023-02-21 14:43     ` Henning Schild
2023-02-21 14:51       ` Andy Shevchenko
2023-03-01 14:53         ` Hans de Goede
2023-03-01 16:06           ` Lee Jones
2023-03-01 16:45             ` Andy Shevchenko
2023-03-01 16:53           ` Henning Schild
2023-02-21 12:24 ` [PATCH 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches Henning Schild
2023-02-21 13:52   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230221122414.24874-2-henning.schild@siemens.com \
    --to=henning.schild@siemens.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=hdegoede@redhat.com \
    --cc=lee@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=markgross@kernel.org \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox