linux-leds.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Yauhen Kharuzhy <jekhor@gmail.com>,
	linux-leds@vger.kernel.org
Subject: Re: [PATCH v3 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver
Date: Mon, 15 May 2023 16:06:07 +0100	[thread overview]
Message-ID: <20230515150607.GH10825@google.com> (raw)
In-Reply-To: <20230430195952.862527-2-hdegoede@redhat.com>

On Sun, 30 Apr 2023, Hans de Goede wrote:

> From: Yauhen Kharuzhy <jekhor@gmail.com>
> 
> Add support for LEDs connected to the Intel Cherry Trail Whiskey Cove
> PMIC. Charger and general-purpose LEDs are supported. Hardware blinking
> is implemented, breathing is not.
> 
> This driver was tested with Lenovo Yoga Book notebook.
> 
> Changes by Hans de Goede (in response to review of v2):
> - Since the PMIC is connected to the battery any changes we make to
>   the LED settings are permanent, even surviving reboot / poweroff.
>   Save LED1 register settings on probe() and if auto-/hw-control was
>   enabled on probe() restore the settings on remove() and shutdown().
> - Delay switching LED1 to software control mode to first brightness write.
> - Use dynamically allocated drvdata instead of a global drvdata variable.
> - Ensure the LED is on when activating blinking.
> - Fix CHT_WC_LED_EFF_BREATHING val ((3 << 1) rather then BIT(3)).
> 
> Link: https://lore.kernel.org/r/20190212205901.13037-2-jekhor@gmail.com
> Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
> Co-developed-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v3:
> - Some comment tweaks and s/LED_OFF/0/
> - Refuse to load on the Yoga Tab 3 as it turns out the LED1 driver output
>   is connected to a haptic feedback motor there (and LED2 is unused)
> 
> Changes in v2:
> - Update comment about YB1 kernel source usage for register info
> - Replace "cht-wc::" LED name prefix with "platform::"
> - Add leds-cht-wcove to list of drivers using "platform::charging" in
>   Documentation/leds/well-known-leds.txt
> - Bail from cht_wc_leds_brightness_set() on first error
> - Make default blink 1Hz, like sw-blink default blink
> ---
>  Documentation/leds/well-known-leds.txt |   2 +-
>  drivers/leds/Kconfig                   |  11 +
>  drivers/leds/Makefile                  |   1 +
>  drivers/leds/leds-cht-wcove.c          | 380 +++++++++++++++++++++++++
>  4 files changed, 393 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/leds/leds-cht-wcove.c

Applied, thanks

-- 
Lee Jones [李琼斯]

  reply	other threads:[~2023-05-15 15:06 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-30 19:59 [PATCH v3 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver Hans de Goede
2023-04-30 19:59 ` [PATCH v3 1/5] " Hans de Goede
2023-05-15 15:06   ` Lee Jones [this message]
2023-04-30 19:59 ` [PATCH v3 2/5] leds: cht-wcove: Add suspend/resume handling Hans de Goede
2023-05-15 15:06   ` Lee Jones
2023-04-30 19:59 ` [PATCH v3 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API Hans de Goede
2023-05-15 15:07   ` Lee Jones
2023-04-30 19:59 ` [PATCH v3 4/5] leds: cht-wcove: Set default trigger for charging LED Hans de Goede
2023-05-15 15:07   ` Lee Jones
2023-04-30 19:59 ` [PATCH v3 5/5] leds: cht-wcove: Use breathing when LED_INIT_DEFAULT_TRIGGER is set Hans de Goede
2023-05-15 15:07   ` Lee Jones
2023-05-04  8:05 ` [PATCH v3 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver Yauhen Kharuzhy
2023-05-04  8:56   ` Hans de Goede
2023-05-04 11:29     ` Yauhen Kharuzhy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230515150607.GH10825@google.com \
    --to=lee@kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=jekhor@gmail.com \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).