linux-leds.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>,
	linux-leds@vger.kernel.org
Cc: "Marek Behún" <kabel@kernel.org>
Subject: [PATCH v3 2/6] leds: turris-omnia: do not use SMBUS calls
Date: Wed,  2 Aug 2023 18:07:44 +0200	[thread overview]
Message-ID: <20230802160748.11208-3-kabel@kernel.org> (raw)
In-Reply-To: <20230802160748.11208-1-kabel@kernel.org>

The leds-turris-omnia driver uses three function for I2C access:
- i2c_smbus_write_byte_data() and i2c_smbus_read_byte_data(), which
  cause an emulated SMBUS transfer,
- i2c_master_send(), which causes an ordinary I2C transfer.

The Turris Omnia MCU LED controller is not semantically SMBUS, it
operates as a simple I2C bus. It does not implement any of the SMBUS
specific features, like PEC, or procedure calls, or anything. Moreover
the I2C controller driver also does not implement SMBUS, and so the
emulated SMBUS procedure from drivers/i2c/i2c-core-smbus.c is used for
the SMBUS calls, which gives an unnecessary overhead.

When I first wrote the driver, I was unaware of these facts, and I
simply used the first function that worked.

Drop the I2C SMBUS calls and instead use simple I2C transfers.

Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/leds/leds-turris-omnia.c | 56 +++++++++++++++++++++++++-------
 1 file changed, 44 insertions(+), 12 deletions(-)

diff --git a/drivers/leds/leds-turris-omnia.c b/drivers/leds/leds-turris-omnia.c
index bbd610100e41..bb2a2b411a56 100644
--- a/drivers/leds/leds-turris-omnia.c
+++ b/drivers/leds/leds-turris-omnia.c
@@ -2,7 +2,7 @@
 /*
  * CZ.NIC's Turris Omnia LEDs driver
  *
- * 2020 by Marek Behún <kabel@kernel.org>
+ * 2020, 2023 by Marek Behún <kabel@kernel.org>
  */
 
 #include <linux/i2c.h>
@@ -41,6 +41,40 @@ struct omnia_leds {
 	struct omnia_led leds[];
 };
 
+static int omnia_cmd_write(const struct i2c_client *client, u8 cmd, u8 val)
+{
+	u8 buf[2] = { cmd, val };
+	int ret;
+
+	ret = i2c_master_send(client, buf, sizeof(buf));
+
+	return ret < 0 ? ret : 0;
+}
+
+static int omnia_cmd_read(const struct i2c_client *client, u8 cmd)
+{
+	struct i2c_msg msgs[2];
+	u8 reply;
+	int ret;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 1;
+	msgs[0].buf = &cmd;
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = 1;
+	msgs[1].buf = &reply;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (likely(ret == ARRAY_SIZE(msgs)))
+		return reply;
+	else if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
 static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,
 					     enum led_brightness brightness)
 {
@@ -64,7 +98,7 @@ static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,
 	if (buf[2] || buf[3] || buf[4])
 		state |= CMD_LED_STATE_ON;
 
-	ret = i2c_smbus_write_byte_data(leds->client, CMD_LED_STATE, state);
+	ret = omnia_cmd_write(leds->client, CMD_LED_STATE, state);
 	if (ret >= 0 && (state & CMD_LED_STATE_ON))
 		ret = i2c_master_send(leds->client, buf, 5);
 
@@ -114,9 +148,8 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	cdev->brightness_set_blocking = omnia_led_brightness_set_blocking;
 
 	/* put the LED into software mode */
-	ret = i2c_smbus_write_byte_data(client, CMD_LED_MODE,
-					CMD_LED_MODE_LED(led->reg) |
-					CMD_LED_MODE_USER);
+	ret = omnia_cmd_write(client, CMD_LED_MODE, CMD_LED_MODE_LED(led->reg) |
+						    CMD_LED_MODE_USER);
 	if (ret < 0) {
 		dev_err(dev, "Cannot set LED %pOF to software mode: %i\n", np,
 			ret);
@@ -124,8 +157,8 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	}
 
 	/* disable the LED */
-	ret = i2c_smbus_write_byte_data(client, CMD_LED_STATE,
-					CMD_LED_STATE_LED(led->reg));
+	ret = omnia_cmd_write(client, CMD_LED_STATE,
+			      CMD_LED_STATE_LED(led->reg));
 	if (ret < 0) {
 		dev_err(dev, "Cannot set LED %pOF brightness: %i\n", np, ret);
 		return ret;
@@ -158,7 +191,7 @@ static ssize_t brightness_show(struct device *dev, struct device_attribute *a,
 	struct i2c_client *client = to_i2c_client(dev);
 	int ret;
 
-	ret = i2c_smbus_read_byte_data(client, CMD_LED_GET_BRIGHTNESS);
+	ret = omnia_cmd_read(client, CMD_LED_GET_BRIGHTNESS);
 
 	if (ret < 0)
 		return ret;
@@ -179,8 +212,7 @@ static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
 	if (brightness > 100)
 		return -EINVAL;
 
-	ret = i2c_smbus_write_byte_data(client, CMD_LED_SET_BRIGHTNESS,
-					(u8)brightness);
+	ret = omnia_cmd_write(client, CMD_LED_SET_BRIGHTNESS, brightness);
 
 	return ret < 0 ? ret : count;
 }
@@ -237,8 +269,8 @@ static void omnia_leds_remove(struct i2c_client *client)
 	u8 buf[5];
 
 	/* put all LEDs into default (HW triggered) mode */
-	i2c_smbus_write_byte_data(client, CMD_LED_MODE,
-				  CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
+	omnia_cmd_write(client, CMD_LED_MODE,
+			CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
 	/* set all LEDs color to [255, 255, 255] */
 	buf[0] = CMD_LED_COLOR;
-- 
2.41.0


  parent reply	other threads:[~2023-08-02 16:08 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-02 16:07 [PATCH v3 0/6] leds: turris-omnia: updates Marek Behún
2023-08-02 16:07 ` [PATCH v3 1/6] leds: turris-omnia: drop unnecessary mutex locking Marek Behún
2023-08-18  8:09   ` Lee Jones
2023-08-18  9:23   ` (subset) " Lee Jones
2023-08-02 16:07 ` Marek Behún [this message]
2023-08-18  8:08   ` [PATCH v3 2/6] leds: turris-omnia: do not use SMBUS calls Lee Jones
2023-08-21 10:01     ` Marek Behún
2023-08-21 12:45       ` Lee Jones
2023-08-02 16:07 ` [PATCH v3 3/6] leds: turris-omnia: use sysfs_emit() instead of sprintf() Marek Behún
2023-08-18  9:18   ` (subset) " Lee Jones
2023-08-02 16:07 ` [PATCH v3 4/6] leds: turris-omnia: make set_brightness() more efficient Marek Behún
2023-08-18  9:42   ` Lee Jones
2023-08-21 10:14     ` Marek Behún
2023-08-21 12:39       ` Lee Jones
2023-08-02 16:07 ` [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger Marek Behún
2023-08-02 16:13   ` Marek Behún
2023-08-18  8:00     ` Lee Jones
2023-08-18 21:12     ` Jacek Anaszewski
2023-08-21  8:15       ` Lee Jones
2023-08-18  9:09   ` Lee Jones
2023-08-21 10:34     ` Marek Behún
2023-08-21 12:36       ` Lee Jones
2023-08-02 16:07 ` [PATCH v3 6/6] leds: turris-omnia: add support for enabling/disabling HW gamma correction Marek Behún
2023-08-18 10:30   ` Lee Jones
2023-08-21 10:46     ` Marek Behún
2023-08-21 12:26       ` Lee Jones
2023-08-14  7:33 ` [PATCH v3 0/6] leds: turris-omnia: updates Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230802160748.11208-3-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).