From: Lee Jones <lee@kernel.org>
To: Xing Tong Wu <xingtong_wu@163.com>
Cc: Pavel Machek <pavel@ucw.cz>,
linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org,
Hans de Goede <hdegoede@redhat.com>,
Xing Tong Wu <xingtong.wu@siemens.com>,
Tobias Schaffner <tobias.schaffner@siemens.com>,
Gerd Haeussler <gerd.haeussler.ext@siemens.com>,
Henning Schild <henning@hennsch.de>
Subject: Re: [PATCH RESEND 1/1] leds: simatic-ipc-leds-gpio: add support for module BX-59A
Date: Thu, 8 Feb 2024 12:09:01 +0000 [thread overview]
Message-ID: <20240208120901.GL689448@google.com> (raw)
In-Reply-To: <20240204083048.2458-2-xingtong_wu@163.com>
On Sun, 04 Feb 2024, Xing Tong Wu wrote:
> From: Xing Tong Wu <xingtong.wu@siemens.com>
>
> This is used for the Siemens Simatic IPC BX-59A, which has its LEDs
> connected to GPIOs provided by the Nuvoton NCT6126D
>
> Signed-off-by: Xing Tong Wu <xingtong.wu@siemens.com>
> ---
> .../leds/simple/simatic-ipc-leds-gpio-core.c | 1 +
> .../simple/simatic-ipc-leds-gpio-f7188x.c | 42 ++++++++++++++++---
> 2 files changed, 37 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio-core.c b/drivers/leds/simple/simatic-ipc-leds-gpio-core.c
> index 667ba1bc3a30..85003fd7f1aa 100644
> --- a/drivers/leds/simple/simatic-ipc-leds-gpio-core.c
> +++ b/drivers/leds/simple/simatic-ipc-leds-gpio-core.c
> @@ -56,6 +56,7 @@ int simatic_ipc_leds_gpio_probe(struct platform_device *pdev,
> case SIMATIC_IPC_DEVICE_127E:
> case SIMATIC_IPC_DEVICE_227G:
> case SIMATIC_IPC_DEVICE_BX_21A:
> + case SIMATIC_IPC_DEVICE_BX_59A:
> break;
> default:
> return -ENODEV;
> diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio-f7188x.c b/drivers/leds/simple/simatic-ipc-leds-gpio-f7188x.c
> index c7c3a1f986e6..783e74e9a805 100644
> --- a/drivers/leds/simple/simatic-ipc-leds-gpio-f7188x.c
> +++ b/drivers/leds/simple/simatic-ipc-leds-gpio-f7188x.c
> @@ -17,7 +17,10 @@
>
> #include "simatic-ipc-leds-gpio.h"
>
> -static struct gpiod_lookup_table simatic_ipc_led_gpio_table = {
> +static struct gpiod_lookup_table *led_lookup_table;
> +static struct gpiod_lookup_table *led_lookup_table_extra;
No globals please.
Dynamically create them in .probe().
If you need to use them later use dev_{s,g}et_drvdata.
> +static struct gpiod_lookup_table simatic_ipc_led_gpio_table_227g = {
> .dev_id = "leds-gpio",
> .table = {
> GPIO_LOOKUP_IDX("gpio-f7188x-2", 0, NULL, 0, GPIO_ACTIVE_LOW),
> @@ -30,7 +33,7 @@ static struct gpiod_lookup_table simatic_ipc_led_gpio_table = {
> },
> };
>
> -static struct gpiod_lookup_table simatic_ipc_led_gpio_table_extra = {
> +static struct gpiod_lookup_table simatic_ipc_led_gpio_table_extra_227g = {
> .dev_id = NULL, /* Filled during initialization */
> .table = {
> GPIO_LOOKUP_IDX("gpio-f7188x-3", 6, NULL, 6, GPIO_ACTIVE_HIGH),
> @@ -39,16 +42,43 @@ static struct gpiod_lookup_table simatic_ipc_led_gpio_table_extra = {
> },
> };
>
> +static struct gpiod_lookup_table simatic_ipc_led_gpio_table_bx_59a = {
> + .dev_id = "leds-gpio",
> + .table = {
> + GPIO_LOOKUP_IDX("gpio-f7188x-2", 0, NULL, 0, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("gpio-f7188x-2", 3, NULL, 1, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("gpio-f7188x-5", 3, NULL, 2, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("gpio-f7188x-5", 2, NULL, 3, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("gpio-f7188x-7", 7, NULL, 4, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("gpio-f7188x-7", 4, NULL, 5, GPIO_ACTIVE_LOW),
> + {} /* Terminating entry */
> + }
> +};
> +
> static int simatic_ipc_leds_gpio_f7188x_probe(struct platform_device *pdev)
> {
> - return simatic_ipc_leds_gpio_probe(pdev, &simatic_ipc_led_gpio_table,
> - &simatic_ipc_led_gpio_table_extra);
> + const struct simatic_ipc_platform *plat = pdev->dev.platform_data;
> +
> + switch (plat->devmode) {
> + case SIMATIC_IPC_DEVICE_227G:
> + led_lookup_table = &simatic_ipc_led_gpio_table_227g;
> + led_lookup_table_extra = &simatic_ipc_led_gpio_table_extra_227g;
> + break;
> + case SIMATIC_IPC_DEVICE_BX_59A:
> + led_lookup_table = &simatic_ipc_led_gpio_table_bx_59a;
> + break;
> + default:
> + return -ENODEV;
> + }
> +
> + return simatic_ipc_leds_gpio_probe(pdev, led_lookup_table,
> + led_lookup_table_extra);
> }
>
> static void simatic_ipc_leds_gpio_f7188x_remove(struct platform_device *pdev)
> {
> - simatic_ipc_leds_gpio_remove(pdev, &simatic_ipc_led_gpio_table,
> - &simatic_ipc_led_gpio_table_extra);
> + simatic_ipc_leds_gpio_remove(pdev, led_lookup_table,
> + led_lookup_table_extra);
> }
>
> static struct platform_driver simatic_ipc_led_gpio_driver = {
> --
> 2.25.1
>
--
Lee Jones [李琼斯]
next prev parent reply other threads:[~2024-02-08 12:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-04 8:30 [PATCH RESEND 0/1] Patch Resent: Enabling LED Support for Siemens IPC BX-59A Xing Tong Wu
2024-02-04 8:30 ` [PATCH RESEND 1/1] leds: simatic-ipc-leds-gpio: add support for module BX-59A Xing Tong Wu
2024-02-08 12:09 ` Lee Jones [this message]
2024-02-18 6:28 ` [RESEND PATCH v2 0/1] Patch Resent: Enabling LED Support for Siemens IPC BX-59A Xing Tong Wu
2024-02-18 6:28 ` [RESEND PATCH v2 1/1] leds: simatic-ipc-leds-gpio: add support for module BX-59A Xing Tong Wu
2024-02-22 21:40 ` andy.shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240208120901.GL689448@google.com \
--to=lee@kernel.org \
--cc=gerd.haeussler.ext@siemens.com \
--cc=hdegoede@redhat.com \
--cc=henning@hennsch.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=tobias.schaffner@siemens.com \
--cc=xingtong.wu@siemens.com \
--cc=xingtong_wu@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).