[PATCH 3/6] leds: bd2606mvv: use device_for_each_child_node() to access device child nodes

[Javier Carrasco <javier.carrasco.cruz@gmail.com>]

The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.

`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.

Use `device_for_each_child_node()` to indicate device's direct child
nodes.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
 drivers/leds/leds-bd2606mvv.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/leds-bd2606mvv.c b/drivers/leds/leds-bd2606mvv.c
index 3fda712d2f80..4f38b7b4d9d1 100644
--- a/drivers/leds/leds-bd2606mvv.c
+++ b/drivers/leds/leds-bd2606mvv.c
@@ -69,7 +69,7 @@ static const struct regmap_config bd2606mvv_regmap = {
 
 static int bd2606mvv_probe(struct i2c_client *client)
 {
-	struct fwnode_handle *np, *child;
+	struct fwnode_handle *child;
 	struct device *dev = &client->dev;
 	struct bd2606mvv_priv *priv;
 	struct fwnode_handle *led_fwnodes[BD2606_MAX_LEDS] = { 0 };
@@ -77,8 +77,7 @@ static int bd2606mvv_probe(struct i2c_client *client)
 	int err, reg;
 	int i;
 
-	np = dev_fwnode(dev);
-	if (!np)
+	if (!dev_fwnode(dev))
 		return -ENODEV;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -94,7 +93,7 @@ static int bd2606mvv_probe(struct i2c_client *client)
 
 	i2c_set_clientdata(client, priv);
 
-	fwnode_for_each_available_child_node(np, child) {
+	device_for_each_child_node(dev, child) {
 		struct bd2606mvv_led *led;
 
 		err = fwnode_property_read_u32(child, "reg", &reg);

-- 
2.40.1