[PATCH v2 0/6] use device_for_each_child_node() to access device child nodes

[Javier Carrasco <javier.carrasco.cruz@gmail.com>]

This series aims to clarify the use cases of:

- device_for_each_child_node[_scoped]()
- fwnode_for_each_available_child_node[_scoped]()

to access firmware nodes.

There have been multiple discussions [1][2] about what the first macro
implies in the sense of availability, and a number of users have opted
for the second macro in cases where the first one should have been
preferred.

The second macro is intended to be used over child nodes of a firmware
node, not direct child nodes of the device node. Instead, those users
retrieve the fwnode member from the device struct just to have access to
a macro that explicitly indicates node availability.

That workaround is not necessary because `device_for_each_child_node()`
implies availability for the existing backends (ACPI, DT, swnode).

This series does not cover other points discussed in [2] like addressing
uses of `fwnode_for_each_child_node()` where `device_*` should have been
used, using the `_avaialble_` variant of the fwnode loop whenever
possible, or adding new `_scoped` macros. Such points will be covered by
subsequent series to keep focus on the "availability" issue.

The conversion has been validated with an LTC2992 hwmon sensor, which is
one of the affected drivers. The rest of the drivers could only be
compiled and checked with static-analysis tools.

Link: https://lore.kernel.org/all/20211205190101.26de4a57@jic23-huawei/ [1]
Link: https://lore.kernel.org/all/20240523-fwnode_for_each_available_child_node_scoped-v2-0-701f3a03f2fb@gmail.com/ [2]

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
Changes in v2:
- [1/6] property.h: drop "if found" from the description of
  device_for_each_child_node()
- [3/6] bd2607mvv.c: fix child node usage.
- Link to v1: https://lore.kernel.org/r/20240706-device_for_each_child_node-available-v1-0-8a3f7615e41c@gmail.com

---
Javier Carrasco (6):
      device property: document device_for_each_child_node macro
      hwmon: (ltc2992) use device_for_each_child_node_scoped() to access child nodes
      leds: bd2606mvv: fix device child node usage in bd2606mvv_probe()
      leds: is31fl319x: use device_for_each_child_node_scoped() to access child nodes
      leds: pca995x: use device_for_each_child_node() to access device child nodes
      net: mvpp2: use device_for_each_child_node() to access device child nodes

 drivers/hwmon/ltc2992.c                         | 19 ++++----------
 drivers/leds/leds-bd2606mvv.c                   | 23 ++++++++---------
 drivers/leds/leds-is31fl319x.c                  | 34 ++++++++-----------------
 drivers/leds/leds-pca995x.c                     | 15 ++++-------
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 13 +++-------
 include/linux/property.h                        | 10 ++++++++
 6 files changed, 45 insertions(+), 69 deletions(-)
---
base-commit: 41c196e567fb1ea97f68a2ffb7faab451cd90854
change-id: 20240701-device_for_each_child_node-available-1c1eca4b6495

Best regards,
-- 
Javier Carrasco <javier.carrasco.cruz@gmail.com>