From: Dzmitry Sankouski <dsankouski@gmail.com>
To: Sebastian Reichel <sre@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Pavel Machek <pavel@ucw.cz>, Hans de Goede <hdegoede@redhat.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>,
Purism Kernel Team <kernel@puri.sm>,
Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-input@vger.kernel.org,
linux-leds@vger.kernel.org,
Dzmitry Sankouski <dsankouski@gmail.com>
Subject: [PATCH v12 02/11] dt-bindings: power: supply: max17042: split on 2 files
Date: Tue, 17 Dec 2024 20:30:00 +0300 [thread overview]
Message-ID: <20241217-starqltechn_integration_upstream-v12-2-ed840944f948@gmail.com> (raw)
In-Reply-To: <20241217-starqltechn_integration_upstream-v12-0-ed840944f948@gmail.com>
Move max17042 common binding part to separate file, to
reuse it for MFDs with platform driver version.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Changes on v12:
- add addtionalProperties: true on common file
- rename *-base file to *-common
- remove compatibles from shared shema
- move required properties to final schema
- remove max77705 compatible from binding - it will be used in
mfd77705 binding
---
Documentation/devicetree/bindings/power/supply/maxim,max17042-common.yaml | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml | 43 +++----------------------------------------
MAINTAINERS | 2 +-
3 files changed, 58 insertions(+), 41 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042-common.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042-common.yaml
new file mode 100644
index 000000000000..67e673ca7970
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042-common.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17042-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17042 fuel gauge series
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ interrupts:
+ maxItems: 1
+ description: |
+ The ALRT pin, an open-drain interrupt.
+
+ maxim,rsns-microohm:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
+ Defining this property enables current-sense functionality.
+
+ maxim,cold-temp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Temperature threshold to report battery as cold (in tenths of degree Celsius).
+ Default is not to report cold events.
+
+ maxim,over-heat-temp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Temperature threshold to report battery as over heated (in tenths of degree Celsius).
+ Default is not to report over heating events.
+
+ maxim,dead-volt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Voltage threshold to report battery as dead (in mV).
+ Default is not to report dead battery events.
+
+ maxim,over-volt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Voltage threshold to report battery as over voltage (in mV).
+ Default is not to report over-voltage events.
+
+ power-supplies: true
+
+additionalProperties: true
+
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
index 085e2504d0dc..0832aa5f5eb0 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -10,7 +10,7 @@ maintainers:
- Sebastian Reichel <sre@kernel.org>
allOf:
- - $ref: power-supply.yaml#
+ - $ref: maxim,max17042-common.yaml#
properties:
compatible:
@@ -24,48 +24,11 @@ properties:
reg:
maxItems: 1
- interrupts:
- maxItems: 1
- description: |
- The ALRT pin, an open-drain interrupt.
-
- maxim,rsns-microohm:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
- Defining this property enables current-sense functionality.
-
- maxim,cold-temp:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Temperature threshold to report battery as cold (in tenths of degree Celsius).
- Default is not to report cold events.
-
- maxim,over-heat-temp:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Temperature threshold to report battery as over heated (in tenths of degree Celsius).
- Default is not to report over heating events.
-
- maxim,dead-volt:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Voltage threshold to report battery as dead (in mV).
- Default is not to report dead battery events.
-
- maxim,over-volt:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Voltage threshold to report battery as over voltage (in mV).
- Default is not to report over-voltage events.
-
- power-supplies: true
-
required:
- - compatible
- reg
+ - compatible
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/MAINTAINERS b/MAINTAINERS
index 81348dbce8ca..0816fe0f3c80 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14164,7 +14164,7 @@ R: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
R: Purism Kernel Team <kernel@puri.sm>
L: linux-pm@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
+F: Documentation/devicetree/bindings/power/supply/maxim,max17042*.yaml
F: drivers/power/supply/max17042_battery.c
MAXIM MAX20086 CAMERA POWER PROTECTOR DRIVER
--
2.39.5
next prev parent reply other threads:[~2024-12-17 17:30 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-17 17:29 [PATCH v12 00/11] Add support for Maxim Integrated MAX77705 PMIC Dzmitry Sankouski
2024-12-17 17:29 ` [PATCH v12 01/11] power: supply: add undervoltage health status property Dzmitry Sankouski
2024-12-17 17:30 ` Dzmitry Sankouski [this message]
2024-12-18 8:28 ` [PATCH v12 02/11] dt-bindings: power: supply: max17042: split on 2 files Krzysztof Kozlowski
2024-12-18 11:25 ` Dzmitry Sankouski
2024-12-18 11:34 ` Krzysztof Kozlowski
2024-12-18 18:24 ` Dzmitry Sankouski
2024-12-17 17:30 ` [PATCH v12 03/11] dt-bindings: power: supply: add maxim,max77705 charger Dzmitry Sankouski
2024-12-17 17:30 ` [PATCH v12 04/11] dt-bindings: mfd: add maxim,max77705 core Dzmitry Sankouski
2024-12-17 17:30 ` [PATCH v12 05/11] dt-bindings: mfd: add maxim,max77705 sensors Dzmitry Sankouski
2024-12-17 21:06 ` Rob Herring (Arm)
2024-12-18 8:26 ` Krzysztof Kozlowski
2024-12-17 17:30 ` [PATCH v12 06/11] power: supply: max17042: add max77705 fuel gauge support Dzmitry Sankouski
2024-12-17 17:30 ` [PATCH v12 07/11] power: supply: max77705: Add charger driver for Maxim 77705 Dzmitry Sankouski
2024-12-17 17:30 ` [PATCH v12 08/11] mfd: simple-mfd-i2c: Add MAX77705 support Dzmitry Sankouski
2024-12-17 17:30 ` [PATCH v12 09/11] mfd: Add new driver for MAX77705 PMIC Dzmitry Sankouski
2024-12-17 17:30 ` [PATCH v12 10/11] input: max77693: add max77705 haptic support Dzmitry Sankouski
2024-12-17 17:30 ` [PATCH v12 11/11] leds: max77705: Add LEDs support Dzmitry Sankouski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241217-starqltechn_integration_upstream-v12-2-ed840944f948@gmail.com \
--to=dsankouski@gmail.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=hdegoede@redhat.com \
--cc=kernel@puri.sm \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=pavel@ucw.cz \
--cc=robh@kernel.org \
--cc=sebastian.krzyszkowiak@puri.sm \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox