[PATCH 2/4] dt-bindings: leds: Add YAML bindings for Virtual Color LED Group driver

[Jonathan Brophy <professorjonny98@gmail.com>]

From: Jonathan Brophy <professor_jonny@hotmail.com>

Document Virtual Color device tree bindings.

Co Signed-off-by: Radoslav Tsvetkov <rtsvetkov@gradotech.eu>
Signed-off-by: Jonathan Brophy <professor_jonny@hotmail.com>
---
 .../leds/leds-group-virtualcolor.yaml         | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-group-virtualcolor.yaml

diff --git a/Documentation/devicetree/bindings/leds/leds-group-virtualcolor.yaml b/Documentation/devicetree/bindings/leds/leds-group-virtualcolor.yaml
new file mode 100644
index 000000000..945058415
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-group-virtualcolor.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-group-virtualcolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Virtual LED Group with Priority Control
+
+maintainers:
+  - Radoslav Tsvetkov <rtsvetkov@gradotech.eu>
+
+description: |
+  Virtual LED group driver that combines multiple monochromatic LEDs into
+  logical groups with priority-based control. The driver ensures only the
+  highest-priority LED state is active at any given time.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: leds-group-virtualcolor
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+
+patternProperties:
+  '^led@[0-9a-f]$':
+    type: object
+    $ref: common.yaml#
+    properties:
+      reg:
+        maxItems: 1
+        description: Virtual LED number
+
+      monochromatic-leds:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: List of phandles to the monochromatic LEDs to group
+
+      priority:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Priority level for LED activation
+                     (higher value means higher priority)
+
+      blink-delay-on:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Time in milliseconds the LED is on during blink
+
+      blink-delay-off:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Time in milliseconds the LED is off during blink
+
+    required:
+      - reg
+      - monochromatic-leds
+
+additionalProperties: false
+
+examples:
+  - |
+    led-controller {
+        compatible = "leds-group-virtualcolor";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+            reg = <0>;
+            label = "status:red";
+            monochromatic-leds = <&led_red>;
+            priority = <2>;
+            blink-delay-on = <500>;
+            blink-delay-off = <500>;
+        };
+
+        led@1 {
+            reg = <1>;
+            label = "status:green";
+            monochromatic-leds = <&led_green>;
+            priority = <1>;
+        };
+    };
+
\ No newline at end of file
--
2.43.0