From: Richard Leitner <richard.leitner@linux.dev>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-leds@vger.kernel.org,
Richard Leitner <richard.leitner@linux.dev>,
Hans Verkuil <hverkuil@kernel.org>
Subject: [PATCH v8 8/8] media: i2c: ov9282: dynamic flash_duration maximum
Date: Tue, 04 Nov 2025 15:30:59 +0100 [thread overview]
Message-ID: <20251104-ov9282-flash-strobe-v8-8-b91dfef1c65a@linux.dev> (raw)
In-Reply-To: <20251104-ov9282-flash-strobe-v8-0-b91dfef1c65a@linux.dev>
This patch sets the current exposure time as maximum for the
flash_duration control. As Flash/Strobes which are longer than the
exposure time have no effect.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
---
drivers/media/i2c/ov9282.c | 30 ++++++++++++++++++++++++++----
1 file changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index 7aa74feb3ee44..df7beedba0b9e 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -198,6 +198,7 @@ struct ov9282_mode {
* @exp_ctrl: Pointer to exposure control
* @again_ctrl: Pointer to analog gain control
* @pixel_rate: Pointer to pixel rate control
+ * @flash_duration: Pointer to flash duration control
* @vblank: Vertical blanking in lines
* @noncontinuous_clock: Selection of CSI2 noncontinuous clock mode
* @cur_mode: Pointer to current selected sensor mode
@@ -220,6 +221,7 @@ struct ov9282 {
struct v4l2_ctrl *again_ctrl;
};
struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *flash_duration;
u32 vblank;
bool noncontinuous_clock;
const struct ov9282_mode *cur_mode;
@@ -611,6 +613,15 @@ static int ov9282_update_controls(struct ov9282 *ov9282,
mode->vblank_max, 1, mode->vblank);
}
+static u32 ov9282_exposure_to_us(struct ov9282 *ov9282, u32 exposure)
+{
+ /* calculate exposure time in µs */
+ u32 frame_width = ov9282->cur_mode->width + ov9282->hblank_ctrl->val;
+ u32 trow_us = frame_width * 1000000UL / ov9282->pixel_rate->val;
+
+ return exposure * trow_us;
+}
+
/**
* ov9282_update_exp_gain() - Set updated exposure and gain
* @ov9282: pointer to ov9282 device
@@ -622,9 +633,10 @@ static int ov9282_update_controls(struct ov9282 *ov9282,
static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain)
{
int ret;
+ u32 exposure_us = ov9282_exposure_to_us(ov9282, exposure);
- dev_dbg(ov9282->dev, "Set exp %u, analog gain %u",
- exposure, gain);
+ dev_dbg(ov9282->dev, "Set exp %u (~%u us), analog gain %u",
+ exposure, exposure_us, gain);
ret = ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 1);
if (ret)
@@ -635,6 +647,12 @@ static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain)
goto error_release_group_hold;
ret = ov9282_write_reg(ov9282, OV9282_REG_AGAIN, 1, gain);
+ if (ret)
+ goto error_release_group_hold;
+
+ ret = __v4l2_ctrl_modify_range(ov9282->flash_duration,
+ 0, exposure_us, 1,
+ OV9282_STROBE_FRAME_SPAN_DEFAULT);
error_release_group_hold:
ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 0);
@@ -1423,6 +1441,7 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
const struct ov9282_mode *mode = ov9282->cur_mode;
struct v4l2_fwnode_device_properties props;
u32 hblank_min;
+ u32 exposure_us;
u32 lpfr;
int ret;
@@ -1495,8 +1514,11 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops,
V4L2_CID_FLASH_STROBE_OE, 0, 1, 1, 0);
- v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_FLASH_DURATION,
- 0, 13900, 1, 8);
+ exposure_us = ov9282_exposure_to_us(ov9282, OV9282_EXPOSURE_DEFAULT);
+ ov9282->flash_duration = v4l2_ctrl_new_std(ctrl_hdlr,
+ &ov9282_ctrl_ops, V4L2_CID_FLASH_DURATION,
+ 0, exposure_us,
+ 1, OV9282_STROBE_FRAME_SPAN_DEFAULT);
ret = v4l2_fwnode_device_parse(ov9282->dev, &props);
if (!ret) {
--
2.47.3
prev parent reply other threads:[~2025-11-04 14:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-04 14:30 [PATCH v8 0/8] Add strobe duration and strobe output enable v4l2 ctrl Richard Leitner
2025-11-04 14:30 ` [PATCH v8 1/8] media: v4l: ctrls: add a control for flash/strobe duration Richard Leitner
2025-11-04 14:30 ` [PATCH v8 2/8] media: v4l: ctrls: add a control for enabling strobe output Richard Leitner
2025-11-04 14:30 ` [PATCH v8 3/8] Documentation: uAPI: media: add V4L2_CID_FLASH_{DURATION,STROBE_OE} Richard Leitner
2025-11-04 14:30 ` [PATCH v8 4/8] media: i2c: ov9282: add output enable register definitions Richard Leitner
2025-11-04 14:30 ` [PATCH v8 5/8] media: i2c: ov9282: add strobe output enable v4l2 control Richard Leitner
2025-11-04 14:30 ` [PATCH v8 6/8] media: i2c: ov9282: add strobe_duration " Richard Leitner
2025-11-04 14:30 ` [PATCH v8 7/8] media: i2c: ov9282: implement try_ctrl for strobe_duration Richard Leitner
2025-11-07 21:05 ` kernel test robot
2025-11-04 14:30 ` Richard Leitner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251104-ov9282-flash-strobe-v8-8-b91dfef1c65a@linux.dev \
--to=richard.leitner@linux.dev \
--cc=dave.stevenson@raspberrypi.com \
--cc=hverkuil@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=pavel@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).