Linux LED subsystem development
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: Svyatoslav Ryhel <clamor95@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Pavel Machek <pavel@kernel.org>,
	David Lechner <dlechner@baylibre.com>,
	Tony Lindgren <tony@atomide.com>,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org
Subject: Re: [PATCH v4 6/6 RESEND] mfd: motorola-cpcap: add support for Mot CPCAP composition
Date: Thu, 7 May 2026 15:07:15 +0100	[thread overview]
Message-ID: <20260507140715.GP305027@google.com> (raw)
In-Reply-To: <20260428153611.142816-7-clamor95@gmail.com>

On Tue, 28 Apr 2026, Svyatoslav Ryhel wrote:

> Add a MFD subdevice composition used in Tegra20 based Mot board
> (Motorola Atrix 4G and Droid X2).
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  drivers/mfd/motorola-cpcap.c | 50 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c
> index 516d1e33affa..fdec92f5c6b0 100644
> --- a/drivers/mfd/motorola-cpcap.c
> +++ b/drivers/mfd/motorola-cpcap.c
> @@ -335,6 +335,54 @@ static const struct cpcap_chip_data cpcap_mapphone_data = {
>  	.num_devices = ARRAY_SIZE(cpcap_mapphone_mfd_devices),
>  };
>  
> +/*
> + * The Mot board features a USB-PHY and charger similar to the ones in
> + * Mapphone; however, because Mot is based on Tegra20, it is incompatible
> + * with the existing implementation, which is tightly interconnected with
> + * the OMAP USB PHY.
> + */
> +static const struct mfd_cell cpcap_mot_mfd_devices[] = {
> +	{
> +		.name          = "cpcap_adc",
> +		.of_compatible = "motorola,mot-cpcap-adc",
> +	}, {
> +		.name          = "cpcap_battery",
> +		.of_compatible = "motorola,cpcap-battery",
> +	}, {
> +		.name          = "cpcap-regulator",
> +		.of_compatible = "motorola,mot-cpcap-regulator",
> +	}, {
> +		.name          = "cpcap-rtc",
> +		.of_compatible = "motorola,cpcap-rtc",
> +	}, {
> +		.name          = "cpcap-pwrbutton",
> +		.of_compatible = "motorola,cpcap-pwrbutton",
> +	}, {
> +		.name          = "cpcap-led",
> +		.id            = 0,
> +		.of_compatible = "motorola,cpcap-led-red",
> +	}, {
> +		.name          = "cpcap-led",
> +		.id            = 1,
> +		.of_compatible = "motorola,cpcap-led-green",
> +	}, {
> +		.name          = "cpcap-led",
> +		.id            = 2,
> +		.of_compatible = "motorola,cpcap-led-blue",
> +	}, {
> +		.name          = "cpcap-led",
> +		.id            = 3,
> +		.of_compatible = "motorola,cpcap-led-adl",

MFD_CELL_OF() for all.

> +	}, {
> +		.name          = "cpcap-codec",
> +	},

MFD_CELL_NAME()

> +};
> +
> +static const struct cpcap_chip_data cpcap_mot_data = {
> +	.mfd_devices = cpcap_mot_mfd_devices,
> +	.num_devices = ARRAY_SIZE(cpcap_mot_mfd_devices),
> +};
> +
>  static int cpcap_probe(struct spi_device *spi)
>  {
>  	struct cpcap_ddata *cpcap;
> @@ -389,6 +437,7 @@ static int cpcap_probe(struct spi_device *spi)
>  static const struct of_device_id cpcap_of_match[] = {
>  	{ .compatible = "motorola,cpcap", .data = &cpcap_default_data },
>  	{ .compatible = "motorola,mapphone-cpcap", .data = &cpcap_mapphone_data	},
> +	{ .compatible = "motorola,mot-cpcap", .data = &cpcap_mot_data },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, cpcap_of_match);
> @@ -396,6 +445,7 @@ MODULE_DEVICE_TABLE(of, cpcap_of_match);
>  static const struct spi_device_id cpcap_spi_ids[] = {
>  	{ .name = "cpcap", .driver_data = (kernel_ulong_t)&cpcap_default_data },
>  	{ .name = "mapphone-cpcap", .driver_data = (kernel_ulong_t)&cpcap_mapphone_data },
> +	{ .name = "mot-cpcap", .driver_data = (kernel_ulong_t)&cpcap_mot_data },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(spi, cpcap_spi_ids);
> -- 
> 2.51.0
> 

-- 
Lee Jones

  reply	other threads:[~2026-05-07 14:07 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-28 15:36 [PATCH v4 0/6 RESEND] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
2026-04-28 15:36 ` [PATCH v4 1/6 RESEND] dt-bindings: leds: leds-cpcap: convert to DT schema Svyatoslav Ryhel
2026-04-28 17:15   ` Rob Herring (Arm)
2026-04-28 15:36 ` [PATCH v4 2/6 RESEND] dt-bindings: input: cpcap-pwrbutton: " Svyatoslav Ryhel
2026-04-28 17:15   ` Rob Herring (Arm)
2026-04-28 15:36 ` [PATCH v4 3/6 RESEND] dt-bindings: mfd: motorola-cpcap: " Svyatoslav Ryhel
2026-04-28 15:36 ` [PATCH v4 4/6 RESEND] dt-bindings: mfd: motorola-cpcap: document Mapphone and Mot CPCAP Svyatoslav Ryhel
2026-04-28 15:36 ` [PATCH v4 5/6 RESEND] mfd: motorola-cpcap: diverge configuration per-board Svyatoslav Ryhel
2026-05-07 14:05   ` Lee Jones
2026-05-07 14:33     ` Svyatoslav Ryhel
2026-05-07 14:42     ` Svyatoslav Ryhel
2026-04-28 15:36 ` [PATCH v4 6/6 RESEND] mfd: motorola-cpcap: add support for Mot CPCAP composition Svyatoslav Ryhel
2026-05-07 14:07   ` Lee Jones [this message]
2026-05-07 14:36     ` Svyatoslav Ryhel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260507140715.GP305027@google.com \
    --to=lee@kernel.org \
    --cc=clamor95@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@kernel.org \
    --cc=robh@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox